This is still code to rework in order to use agreement to obtain a new
configEpoch when a slot is migrated, however this commit handles the
special case that happens when the nodes are just started and everybody
has a configEpoch of 0. In this special condition to have the maximum
configEpoch is not enough as the special epoch 0 is not unique (all the
others are).
This does not fixes the intrinsic race condition of a failover happening
while we are resharding, that will be addressed later.
used_memory_peak only updates in serverCron every server.hz,
but Redis can use more memory and a user can request memory
INFO before used_memory_peak gets updated in the next
cron run.
This patch updates used_memory_peak to the current
memory usage if the current memory usage is higher
than the recorded used_memory_peak value.
(And it only calls zmalloc_used_memory() once instead of
twice as it was doing before.)
This commit reworks the redis-cli --bigkeys command to provide more
information about our progress as well as output summary information
when we're done.
- We now show an approximate percentage completion as we go
- Hiredis pipelining is used for TYPE and SIZE retreival
- A summary of keyspace distribution and overall breakout at the end
With the new behavior it is possible to specify just the start in the
range (the end will be assumed to be the first byte), or it is possible
to specify both start and end.
This is useful to change the behavior of the command when looking for
zeros inside a string.
1) If the user specifies both start and end, and no 0 is found inside
the range, the command returns -1.
2) If instead no range is specified, or just the start is given, even
if in the actual string no 0 bit is found, the command returns the
first bit on the right after the end of the string.
So for example if the string stored at key foo is "\xff\xff":
BITPOS foo (returns 16)
BITPOS foo 0 -1 (returns -1)
BITPOS foo 0 (returns 16)
The idea is that when no end is given the user is just looking for the
first bit that is zero and can be set to 1 with SETBIT, as it is
"available". Instead when a specific range is given, we just look for a
zero within the boundaries of the range.
This commit changes the findBigKeys() function in redis-cli.c to use the new
SCAN command for iterating the keyspace, rather than RANDOMKEY. Because we
can know when we're done using SCAN, it will exit after exhausting the keyspace.
The computation is just something to take the CPU busy, no need to use a
specific type. Since stdint.h was not included this prevented
compilation on certain systems.
Now that we have a runtime configuration system, it is very important to
be able to log how the Sentinel configuration changes over time because
of API calls.
This error was conceived for the older version of Sentinel that worked
via master redirection and that was not able to get configuration
updates from other Sentinels via the Pub/Sub channel of masters or
slaves.
This reply does not make sense today, every Sentinel should reply with
the best information it has currently. The error will make even more
sense in the future since the plan is to allow Sentinels to update the
configuration of other Sentinels via gossip with a direct chat without
the prerequisite that they have at least a monitored instance in common.
If you launch redis with `redis-server --sentinel` then
in a ps, your output only says "redis-server IP:Port" — this
patch changes the proc title to include [sentinel] or
[cluster] depending on the current server mode:
e.g. "redis-server IP:Port [sentinel]"
"redis-server IP:Port [cluster]"
If we can't reconfigure a slave in time during failover, go forward as
anyway the slave will be fixed by Sentinels in the future, once they
detect it is misconfigured.
Otherwise a failover in progress may never terminate if for some reason
the slave is uncapable to sync with the master while at the same time
it is not disconnected.
The code tried to obtain the configuration file absolute path after
processing the configuration file. However if config file was a relative
path and a "dir" statement was processed reading the config, the absolute
path obtained was wrong.
With this fix the absolute path is obtained before processing the
configuration while the server is still in the original directory where
it was executed.
Now it logs the file name if it is not accessible. Also there is a
different error for the missing config file case, and for the non
writable file case.
server.unixtime and server.mstime are cached less precise timestamps
that we use every time we don't need an accurate time representation and
a syscall would be too slow for the number of calls we require.
Such an example is the initialization and update process of the last
interaction time with the client, that is used for timeouts.
However rdbLoad() can take some time to load the DB, but at the same
time it did not updated the time during DB loading. This resulted in the
bug described in issue #1535, where in the replication process the slave
loads the DB, creates the redisClient representation of its master, but
the timestamp is so old that the master, under certain conditions, is
sensed as already "timed out".
Thanks to @yoav-steinberg and Redis Labs Inc for the bug report and
analysis.
This commit fixes a serious Lua scripting replication issue, described
by Github issue #1549. The root cause of the problem is that scripts
were put inside the script cache, assuming that slaves and AOF already
contained it, even if the scripts sometimes produced no changes in the
data set, and were not actaully propagated to AOF/slaves.
Example:
eval "if tonumber(KEYS[1]) > 0 then redis.call('incr', 'x') end" 1 0
Then:
evalsha <sha1 step 1 script> 1 0
At this step sha1 of the script is added to the replication script cache
(the script is marked as known to the slaves) and EVALSHA command is
transformed to EVAL. However it is not dirty (there is no changes to db),
so it is not propagated to the slaves. Then the script is called again:
evalsha <sha1 step 1 script> 1 1
At this step master checks that the script already exists in the
replication script cache and doesn't transform it to EVAL command. It is
dirty and propagated to the slaves, but they fail to evaluate the script
as they don't have it in the script cache.
The fix is trivial and just uses the new API to force the propagation of
the executed command regardless of the dirty state of the data set.
Thank you to @minus-infinity on Github for finding the issue,
understanding the root cause, and fixing it.
A system similar to the RDB write error handling is used, in which when
we can't write to the AOF file, writes are no longer accepted until we
are able to write again.
For fsync == always we still abort on errors since there is currently no
easy way to avoid replying with success to the user otherwise, and this
would violate the contract with the user of only acknowledging data
already secured on disk.
Avoid to trash a configEpoch for every slot migrated if this node has
already the max configEpoch across the cluster.
Still work to do in this area but this avoids both ending with a very
high configEpoch without any reason and to flood the system with fsyncs.
The actual goal of the function was to get the max configEpoch found in
the cluster, so make it general by removing the assignment of the max
epoch to currentEpoch that is useful only at startup.
Removed a stale conditional preventing the configEpoch from incrementing
after the import in certain conditions. Since the master got a new slot
it should always claim a new configuration.
The node receiving the hash slot needs to have a version that wins over
the other versions in order to force the ownership of the slot.
However the current code is far from perfect since a failover can happen
during the manual resharding. The fix is a work in progress but the
bottom line is that the new version must either be voted as usually,
set by redis-trib manually after it makes sure can't be used by other
nodes, or reserved configEpochs could be used for manual operations (for
example odd versions could be never used by slaves and are always used
by CLUSTER SETSLOT NODE).
During slots migration redis-trib can send a number of SETSLOT commands.
Fsyncing every time is a bit too much in production as verified
empirically.
To make sure configs are fsynced on all nodes after a resharding
redis-trib may send something like CLUSTER CONFSYNC.
In this case fsyncs were not providing too much value since anyway
processes can crash in the middle of the resharding of an hash slot, and
redis-trib should be able to recover from this condition anyway.
If the slot is manually assigned to another node, clear the migrating
status regardless of the fact it was previously assigned to us or not,
as long as we no longer have keys for this slot.
This avoid a race during slots migration that may leave the slot in
migrating status in the source node, since it received an update message
from the destination node that is already claiming the slot.
This way we are sure that redis-trib at the end of the slot migration is
always able to close the slot correctly.
