In activeDefragSdsListAndDict when defrag list key sucess, the key
in dict is also replaced. Then the corresponding dictEntry is
defraged. But the dictEntry will be defraged in next step by defrag
the dict values too.
Add publish channel permissions check in processCommand.
processCommand didn't check publish channel permissions, so we can
queue a publish command in a transaction. But when exec the transaction,
it will fail with -NOPERM.
We also union keys/commands/channels permissions check togegher in
ACLCheckAllPerm. Remove pubsubCheckACLPermissionsOrReply in
publishCommand/subscribeCommand/psubscribeCommand. Always
check permissions in processCommand/execCommand/
luaRedisGenericCommand.
* SLOWLOG didn't record anything for blocked commands because the client
was reset and argv was already empty. there was a fix for this issue
specifically for modules, now it works for all blocked clients.
* The original command argv (before being re-written) was also reset
before adding the slowlog on behalf of the blocked command.
* Latency monitor is now updated regardless of the slowlog flags of the
command or its execution (their purpose is to hide sensitive info from
the slowlog, not hide the fact the latency happened).
* Latency monitor now uses real_cmd rather than c->cmd (which may be
different if the command got re-written, e.g. GEOADD)
Changes:
* Unify shared code between slowlog insertion in call() and
updateStatsOnUnblock(), hopefully prevent future bugs from happening
due to the later being overlooked.
* Reset CLIENT_PREVENT_LOGGING in resetClient rather than after command
processing.
* Add a test for SLOWLOG and BLPOP
Notes:
- real_cmd == c->lastcmd, except inside MULTI and Lua.
- blocked commands never happen in these cases (MULTI / Lua)
- real_cmd == c->cmd, except for when the command is rewritten (e.g.
GEOADD)
- blocked commands (currently) are never rewritten
- other than the command's CLIENT_PREVENT_LOGGING, and the
execution flag CLIENT_PREVENT_LOGGING, other cases that we want to
avoid slowlog are on AOF loading (specifically CMD_CALL_SLOWLOG will
be off when executed from execCommand that runs from an AOF)
the corrupt-dump-fuzzer test found a case where an access to a corrupt
stream would have caused accessing to uninitialized memory.
now it'll panic instead.
The issue was that there was a stream that says it has more than 0
records, but looking for the max ID came back empty handed.
p.s. when sanitize-dump-payload is used, this corruption is detected,
and the RESTORE command is gracefully rejected.
We sometimes see the crash report saying we were killed by a random
process even in cases where the crash was spontanius in redis.
for instance, crashes found by the corrupt-dump test.
It looks like this si_pid is sometimes left uninitialized, and a good
way to tell if the crash originated in redis or trigged by outside is to
look at si_code, real signal codes are always > 0, and ones generated by
kill are have si_code of 0 or below.
Reading CoW from /proc/<pid>/smaps can be slow with large processes on
some platforms.
This measures the time it takes to read CoW info and limits the duty
cycle of future updates to roughly 1/100.
As current_cow_size no longer represnets a current, fixed interval value
there is also a new current_cow_size_age field that provides information
about the age of the size value, in seconds.
Since redis 6.2, redis immediately tries to connect to the master, not
waiting for replication cron.
in the slow freebsd CI, this test failed and master_link_status was
already "up" when INFO was called.
pcall function runs another LUA function in protected mode, this means
that any error will be caught by this function and will not stop the LUA
execution. The script kill mechanism uses error to stop the running script.
Scripts that uses pcall can catch the error raise by the script kill mechanism,
this will cause a script like this to be unkillable:
local f = function()
while 1 do
redis.call('ping')
end
end
while 1 do
pcall(f)
end
The fix is, when we want to kill the script, we set the hook function to be invoked
after each line. This will promise that the execution will get another
error before it is able to enter the pcall function again.
Some operating systems (e.g., NetBSD and OpenBSD) have switched to
using a 64-bit integer for time_t on all platforms. This results in currently
harmless compiler warnings due to potential truncation.
These changes fix these minor portability concerns.
* Fix format string for systems with 64 bit time
* use llabs to avoid truncation with 64 bit time
In the long term we may want to move away from anet completely and have
everything implemented natively in connection.c, instead of having an
extra layer.
For now, just get rid of unused code.
In certain scenario start_server may think it failed to start a redis server
although it started successfully. in these cases, it'll not terminate it, and
it'll remain running when the test is over.
In start_server if config doesn't have bind (the minimal.conf in introspection.tcl),
it will try to bind ipv4 and ipv6. One may success while other fails. It will
output "Could not create server TCP listening socket".
wait_server_started uses this message to check whether instance started
successfully. So it will consider that it failed even though redis started successfully.
Additionally, in some cases it wasn't clear to users why the server exited,
since the warning message printed to the log, could in some cases be harmless,
and in some cases fatal.
This PR adds makes a clear distinction between a warning log message and
a fatal one, and changes the test suite to look for the fatal message.
lookupKeyReadOrReply and lookupKeyWriteOrReply might decide to reply to the user
with the given robj reply. This reply might be an error reply and if so addReply
function is used instead of addReplyErrorObject which will cause the error reply not
to be counted on stats. The fix checks the first char in the reply and if its '-' (error)
it uses addReplyErrorObject.
REDISMODULE_CTX_FLAGS_EVICT and REDISMODULE_CTX_FLAGS_MAXMEMORY
shouldn't be set when the module is run inside a replica that doesn't do eviction.
one may argue that the database is under eviction (the master does eviction and sends DELs to the replica).
but on the other hand, we don't really know the master's configuration.
all that matters is if the current instance does evictions or not.
listenToPort attempts to gracefully handle and ignore certain errors but does not store errno prior to logging, which in turn calls several libc functions that may overwrite errno.
This has been discovered due to libmusl strftime() always returning with errno set to EINVAL, which resulted with docker-library/redis#273.
1. moduleReplicateMultiIfNeeded should use server.in_eval like
moduleHandlePropagationAfterCommandCallback
2. server.in_eval could have been set to 1 and not reset back
to 0 (a lot of missed early-exits after in_eval is already 1)
Note: The new assertions in processCommand cover (2) and I added
two module tests to cover (1)
Implications:
If an EVAL that failed (and thus left server.in_eval=1) runs before a module
command that replicates, the replication stream will contain MULTI (because
moduleReplicateMultiIfNeeded used to check server.lua_caller which is NULL
at this point) but not EXEC (because server.in_eval==1)
This only affects modules as module.c the only user of server.in_eval.
Affects versions 6.2.0, 6.2.1
On a replica we do accept connections, even though commands accessing
the database will operate in read-only mode. But the server is still
already operational and processing commands.
Not sending the readiness notification means that on a HA setup where
the nodes all start as replicas (with replicaof in the config) with
a replica that cannot connect to the master server and which might not
come back in a predictable amount of time or at all, the service
supervisor will end up timing out the service and terminating it, with
no option to promote it to be the main instance. This seems counter to
what the readiness notification is supposed to be signaling.
Instead send the readiness notification when we start accepting
commands, and then send the various server status changes as that.
Fixes: commit 641c64ada1
Fixes: commit dfb598cf33
Bug 1:
When a module ctx is freed moduleHandlePropagationAfterCommandCallback
is called and handles propagation. We want to prevent it from propagating
commands that were not replicated by the same context. Example:
1. module1.foo does: RM_Replicate(cmd1); RM_Call(cmd2); RM_Replicate(cmd3)
2. RM_Replicate(cmd1) propagates MULTI and adds cmd1 to also_propagagte
3. RM_Call(cmd2) create a new ctx, calls call() and destroys the ctx.
4. moduleHandlePropagationAfterCommandCallback is called, calling
alsoPropagates EXEC (Note: EXEC is still not written to socket),
setting server.in_trnsaction = 0
5. RM_Replicate(cmd3) is called, propagagting yet another MULTI (now
we have nested MULTI calls, which is no good) and then cmd3
We must prevent RM_Call(cmd2) from resetting server.in_transaction.
REDISMODULE_CTX_MULTI_EMITTED was revived for that purpose.
Bug 2:
Fix issues with nested RM_Call where some have '!' and some don't.
Example:
1. module1.foo does RM_Call of module2.bar without replication (i.e. no '!')
2. module2.bar internally calls RM_Call of INCR with '!'
3. at the end of module1.foo we call RM_ReplicateVerbatim
We want the replica/AOF to see only module1.foo and not the INCR from module2.bar
Introduced a global replication_allowed flag inside RM_Call to determine
whether we need to replicate or not (even if '!' was specified)
Other changes:
Split beforePropagateMultiOrExec to beforePropagateMulti afterPropagateExec
just for better readability
Have a clear separation between in and out flags
Other changes:
delete dead code in RM_ZsetIncrby: if zsetAdd returned error (happens only if
the result of the operation is NAN or if score is NAN) we return immediately so
there is no way that zsetAdd succeeded and returned NAN in the out-flags
