The bug occurs when 'callback' re-registers itself to a point
in the future and the execution time in non-negligible:
'now' refers to time BEFORE callback was executed and is used
to calculate 'next_period'.
We must get the actual current time when calculating 'next_period'
Useful when you want to know through which bind address the client connected to
the server in case of multiple bind addresses.
- Adding `laddr` field to CLIENT list showing the local (bind) address.
- Adding `LADDR` option to CLIENT KILL to kill all the clients connected
to a specific local address.
- Refactoring to share code.
Background:
#3467 (redis 4.0.0), started ignoring ENOPROTOOPT, but did that only for
the default bind (in case bind config wasn't explicitly set).
#5598 (redis 5.0.3), added that for bind addresses explicitly set
(following bug reports in Debian for redis 4.0.9 and 5.0.1), it
also ignored a bunch of other errors like EPROTONOSUPPORT which was
requested in #3894, and also added EADDRNOTAVAIL (wasn't clear why).
This (ignoring EADDRNOTAVAIL) makes redis start successfully, even if a
certain network interface isn't up yet , in which case we rather redis
fail and will be re-tried when the NIC is up, see #7933.
However, it turns out that when IPv6 is disabled (supported but unused),
the error we're getting is EADDRNOTAVAIL. and in many systems the
default config file tries to bind to localhost for both v4 and v6 and
would like to silently ignore the error on v6 if disabled.
This means that we sometimes want to ignore EADDRNOTAVAIL and other times
we wanna fail.
So this commit changes these main things:
1. Ignore all the errors we ignore for both explicitly requested bind
address and a default implicit one.
2. Add a '-' prefix to allow EADDRNOTAVAIL be ignored (by default that's
different than the previous behavior).
3. Restructure that function in a more readable and maintainable way see
below.
4. Make the default behavior of listening to all achievable by setting
a bind config directive to * (previously only possible by omitting
it)
5. document everything.
The old structure of this function was that even if there are no bind
addresses requested, the loop that runs though the bind addresses runs
at least once anyway!
In that one iteration of the loop it binds to both v4 and v6 addresses,
handles errors for each of them separately, and then eventually at the
if-else chain, handles the error of the last bind attempt again!
This was very hard to read and very error prone to maintain, instead now
when the bind info is missing we create one with two entries, and run
the simple loop twice.
Turns out this was broken since version 4.0 when we added sds size
classes.
The cluster code uses sds for the receive buffer, and then casts it to a
struct and accesses a 64 bit variable.
This commit replaces the use of sds with a simple reallocated buffer.
In case redis starts and find that THP is enabled ("always"), instead
of printing a log message, which might go unnoticed, redis will try to
disable it (just for the redis process).
Note: it looks like on self-bulit kernels THP is likely be set to "always" by default.
Some discuss about THP side effect on Linux:
according to http://www.antirez.com/news/84, we can see that
redis latency spikes are caused by linux kernel THP feature.
I have tested on E3-2650 v3, and found that 2M huge page costs
about 0.25ms to fix COW page fault.
Add a new config 'disable-thp', the recommended setting is 'yes',
(default) the redis tries to disable THP by prctl syscall. But
users who really want THP can set it to "no"
Thanks to Oran & Yossi for suggestions.
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
This commit deals with manual failover as well as non-manual failover.
We did tests with manual failover as follows:
1, Setup redis cluster which holds 16 partions, each having only
1 corresponding replica.
2, Write a batch of data to redis cluster and make sure the redis is doing
a active expire in serverCron.
3, Do a manual failover sequentially to each partions with a time interval
of 3 minutes.
4, Collect logs and do some computaiton work.
The result:
case avgTime maxTime minTime
C1 95.8ms 227ms 25ms
C2 47.9ms 96ms 12ms
C3 12.6ms 27ms 7ms
Explanation
case C1: All nodes use the version before optimization
case C2: Masters use the elder version while replicas use the optimized version
case C3: All nodes use the optimized version
failover time: The time between when replica got a `manual failover request` and
when it `won the failover election`.
avgTime: average failover time
maxTime: maximum failover time
minTime: mimimum failover time
ms: millisecond
Co-authored-by: chendq8 <c.d_q@163.com>
When using a system with no malloc_usable_size(), zmalloc_size() assumed
that the heap allocator always returns blocks that are long-padded.
This may not always be the case, and will result with zmalloc_size()
returning a size that is bigger than allocated. At least in one case
this leads to out of bound write, process crash and a potential security
vulnerability.
Effectively this does not affect the vast majority of users, who use
jemalloc or glibc.
This problem along with a (different) fix was reported by Drew DeVault.
The tests sometimes fail to find a log message.
Recently i added a print that shows the log files that are searched
and it shows that the message was in deed there.
The only reason i can't think of for this seach to fail, is we we
happened to read an incomplete line, which didn't match our pattern and
then on the next iteration we would continue reading from the line after
it.
The fix is to always re-evaluation the previous line.
- add test suite coverage for redis-benchmark
- add --version (similar to what redis-cli has)
- fix bug sending more requests than intended when pipeline > 1.
- when done sending requests, avoid freeing client in the write handler, in theory before
responses are received (probably dead code since the read handler will call clientDone first)
Co-authored-by: Oran Agra <oran@redislabs.com>
`info Persistence` will include correct (updated) rdb_last_bgsave_time_sec
For diskless bgsave (sockets) too (like a few other persistence info fields).
Refactor code to reduce duplicate code.
Previous code would have added default redis save parameters
to the config file on rewrite, which would have been silently ignored
when the config file is loaded.
The new code avoids adding this, and also actively removes these lines
If added by a previous config rewrite.
This wrong behavior was backed by a test, and also documentation, and dates back to 2010.
But it makes no sense to anyone involved so it was decided to change that.
Note that 20eeddf (invalidate watch on expire on access) was released in 6.0 RC2
and 2d1968f released in in 6.0.0 GA (invalidate watch when key is evicted).
both of which do similar changes.
Adding the ":{tag}" only if --cluster is used, so that when used against
a proxy it generates traffic to all shards.
Co-authored-by: Oran Agra <oran@redislabs.com>
minor fix for a bug which happen on error handling code
and doesn't look like it could have caused any real harm
(fd number wouldn't have been reused yet)
This commit implements ACL for Sentinel mode, main work of this PR includes:
- Update Sentinel command table in order to better support ACLs.
- Fix couple of things which currently blocks the support for ACL on sentinel mode.
- Provide "sentinel sentinel-user" and "sentinel sentinel-pass " configuration in order to let sentinel authenticate with a specific user in other sentinels.
- requirepass is kept just for compatibility with old config files
Co-authored-by: Oran Agra <oran@redislabs.com>
In some cases one command added a very big bulk of memory, and this
would be "resolved" by the eviction before the next command.
Seeing an unexplained mass eviction we would wish to
know the highest momentary usage too.
Tracking it in call() and beforeSleep() adds some hooks in AOF and RDB
loading.
The fix in clientsCronTrackExpansiveClients is related to #7874
introduces a NOMKSTREAM option for xadd command, this would be useful for some
use cases when we do not want to create new stream by default:
XADD key [MAXLEN [~|=] <count>] [NOMKSTREAM] <ID or *> [field value] [field value]
Reference the correct "case", case 4, in the comment explaining the need
for case 3, when the number of request items is too close to the
cardinality of the set. Case 4 is indeed the "natural approach"
referenced earlier in that sentence.
This is a compatibility issue with redis 5.0 that was introduced by ACL.
Before this commit, setting requirepass to an empty string will result
in a server that needs an empty AUTH, unlike redis 5.0 which would
accept connections without an AUTH.
If 'delta' is negative 'mem_freed' may underflow and cause
the while loop to exit prematurely (And not evicting enough
memory)
mem_freed can be negative when:
1. We use lazy free (consuming memory by appending to a list)
2. Thread doing an allocation between the two calls to zmalloc_used_memory.
If we fail or stop to rewrite aof, we need to remove temporary aof.
We also remove temporary rdb when replicas abort to receive rdb.
But currently we delete them in main thread, to avoid blocking,
we should use bg_unlink to remove them in a background thread.
Btw, we have already used this way to removed child process temporary rdb.
- Clarify some documentation comments
- Make sure blocked-on-keys client privdata is accessible
from withing the timeout callback
- Handle blocked clients in beforeSleep - In case a key
becomes "ready" outside of processCommand
See #7879#7880
This cleans up and simplifies the API by passing the command name as the
first argument. Previously the command name was specified explicitly,
but was still included in the argv.
* Introduce a new API's: RM_GetContextFlagsAll, and
RM_GetKeyspaceNotificationFlagsAll that will return the
full flags mask of each feature. The module writer can
check base on this value if the Flags he needs are
supported or not.
* For each flag, introduce a new value on redismodule.h,
this value represents the LAST value and should be there
as a reminder to update it when a new value is added,
also it will be used in the code to calculate the full
flags mask (assuming flags are incrementally increasing).
In addition, stated that the module writer should not use
the LAST flag directly and he should use the GetFlagAll API's.
* Introduce a new API: RM_IsSubEventSupported, that returns for a given
event and subevent, whether or not the subevent supported.
* Introduce a new macro RMAPI_FUNC_SUPPORTED(func) that returns whether
or not a function API is supported by comparing it to NULL.
* Introduce a new API: int RM_GetServerVersion();, that will return the
current Redis version in the format 0x00MMmmpp; e.g. 0x00060008;
* Changed unstable version from 999.999.999 to 255.255.255
Co-authored-by: Oran Agra <oran@redislabs.com>
Co-authored-by: Yossi Gottlieb <yossigo@gmail.com>
The main motivation here is to provide a way for modules to create a
single, global context that can be used for logging.
Currently, it is possible to obtain a thread-safe context that is not
attached to any blocked client by using `RM_GetThreadSafeContext`.
However, the attached context is not linked to the module identity so
log messages produced are not tagged with the module name.
Ideally we'd fix this in `RM_GetThreadSafeContext` itself but as it
doesn't accept the current context as an argument there's no way to do
that in a backwards compatible manner.
