Add these INFO metrics:
* client_query_buffer_limit_disconnections
* client_output_buffer_limit_disconnections
Sometimes it is useful to monitor whether clients reaches size limit of
query buffer and output buffer, to decide whether we need to adjust the
buffer size limit or reduce client query payload.
This test failed several times:
```
*** [err]: LATENCY GRAPH can output the event graph in tests/unit/latency-monitor.tcl
Expected '478' to be more than or equal to '500' (context: type eval
line 8 cmd {assert_morethan_equal $high 500} proc ::test)
```
Not sure why, adding some verbose printing that'll print the command
result on the next time.
BITCOUNT and BITPOS with non-existing key will return 0 even the
arguments are error, before this commit:
```
> flushall
OK
> bitcount s 0
(integer) 0
> bitpos s 0 0 1 hello
(integer) 0
> set s 1
OK
> bitcount s 0
(error) ERR syntax error
> bitpos s 0 0 1 hello
(error) ERR syntax error
```
The reason is that we judged non-existing before parameter checking and
returned. This PR fixes it, and after this commit:
```
> flushall
OK
> bitcount s 0
(error) ERR syntax error
> bitpos s 0 0 1 hello
(error) ERR syntax error
```
Also BITPOS made the same fix as #12394, check for wrong argument, before
checking for key.
```
> lpush mylist a b c
(integer) 3
> bitpos mylist 1 a b
(error) WRONGTYPE Operation against a key holding the wrong kind of value
```
Generally, In any command we first check for the argument and then check if key exist.
Some of the examples are
```
127.0.0.1:6379> getrange no-key invalid1 invalid2
(error) ERR value is not an integer or out of range
127.0.0.1:6379> setbit no-key 1 invalid
(error) ERR bit is not an integer or out of range
127.0.0.1:6379> xrange no-key invalid1 invalid2
(error) ERR Invalid stream ID specified as stream command argument
```
**Before change**
```
bitcount no-key invalid1 invalid2
0
```
**After change**
```
bitcount no-key invalid1 invalid2
(error) ERR value is not an integer or out of range
```
In our test case, now we missed some test coverage for client sub-commands.
This pr goal is to add some test coverage cases of the following commands:
Client caching
Client kill
Client no-evict
Client pause
Client reply
Client tracking
Client setname
At the very least, this is useful to make sure there are no leaks and crashes in these code paths.
When adding a new ACL rule was added, an attempt was made to remove
any "overlapping" rules. However, there when a match was found, the search
was not resumed at the right location, but instead after the original position of
the original command.
For example, if the current rules were `-config +config|get` and a rule `+config`
was added. It would identify that `-config` was matched, but it would skip over
`+config|get`, leaving the compacted rule `-config +config`. This would be evaluated
safely, but looks weird.
This bug can only be triggered with subcommands, since that is the only way to
have sequential matching rules. Resolves#12470. This is also only present in 7.2.
I think there was also a minor risk of removing another valid rule, since it would start
the search of the next command at an arbitrary point. I couldn't find a valid offset that
would have cause a match using any of the existing commands that have subcommands
with another command.
Fix the assertion when a busy script (timeout) signal ready keys (like LPUSH),
and then an arbitrary client's `allow-busy` command steps into `handleClientsBlockedOnKeys`
try wake up clients blocked on keys (like BLPOP).
Reproduction process:
1. start a redis with aof
`./redis-server --appendonly yes`
2. exec blpop
`127.0.0.1:6379> blpop a 0`
3. use another client call a busy script and this script push the blocked key
`127.0.0.1:6379> eval "redis.call('lpush','a','b') while(1) do end" 0`
4. user a new client call an allow-busy command like auth
`127.0.0.1:6379> auth a`
BTW, this issue also break the atomicity of script.
This bug has been around for many years, the old versions only have the
atomic problem, only 7.0/7.2 has the assertion problem.
Co-authored-by: Oran Agra <oran@redislabs.com>
This PR mainly fixes a possible integer overflow in `json_append_string()`.
When we use `cjson.encoding()` to encode a string larger than 2GB, at specific
compilation flags, an integer overflow may occur leading to truncation, resulting
in the part of the string larger than 2GB not being encoded.
On the other hand, this overflow doesn't cause any read or write out-of-range or segment fault.
1) using -O0 for lua_cjson (`make LUA_DEBUG=yes`)
In this case, `i` will overflow and leads to truncation.
When `i` reaches `INT_MAX+1` and overflows to INT_MIN, when compared to
len, `i` (1000000..00) is expanded to 64 bits signed integer (1111111.....000000) .
At this point i will be greater than len and jump out of the loop, so `for (i = 0; i < len; i++)`
will loop up to 2^31 times, and the part of larger than 2GB will be truncated.
```asm
`i` => -0x24(%rbp)
<+253>: addl $0x1,-0x24(%rbp) ; overflow if i large than 2^31
<+257>: mov -0x24(%rbp),%eax
<+260>: movslq %eax,%rdx ; move a 32-bit value with sign extension into a 64-bit signed
<+263>: mov -0x20(%rbp),%rax
<+267>: cmp %rax,%rdx ; check `i < len`
<+270>: jb 0x212600 <json_append_string+148>
```
2) using -O2/-O3 for lua_cjson (`make LUA_DEBUG=no`, **the default**)
In this case, because singed integer overflow is an undefined behavior, `i` will not overflow.
`i` will be optimized by the compiler and use 64-bit registers for all subsequent instructions.
```asm
<+180>: add $0x1,%rbx ; Using 64-bit register `rbx` for i++
<+184>: lea 0x1(%rdx),%rsi
<+188>: mov %rsi,0x10(%rbp)
<+192>: mov %al,(%rcx,%rdx,1)
<+195>: cmp %rbx,(%rsp) ; check `i < len`
<+199>: ja 0x20b63a <json_append_string+154>
```
3) using 32bit
Because `strbuf_ensure_empty_length()` preallocates memory of length (len * 6 + 2),
in 32-bit `cjson.encode()` can only handle strings smaller than ((2 ^ 32) - 3 ) / 6.
So 32bit is not affected.
Also change `i` in `strbuf_append_string()` to `size_t`.
Since its second argument `str` is taken from the `char2escape` string array which is never
larger than 6, so `strbuf_append_string()` is not at risk of overflow (the bug was unreachable).
When doing merge selector, we should check whether the merge
has started (i.e., whether open_bracket_start is -1) every time.
Otherwise, encountering an illegal selector pattern could succeed
and also cause memory leaks, for example:
```
acl setuser test1 (+PING (+SELECT (+DEL )
```
The above would leak memory and succeed with only DEL being applied,
and would now error after the fix.
Co-authored-by: Oran Agra <oran@redislabs.com>
Additional test coverage for incr/decr operation.
integer number could be present in raw encoding format due to operation like append. A incr/decr operation following it optimize the string to int encoding format.
When the redis server cluster running on cluster-preferred-endpoint-type unknown-endpoint mode, and receive a request that should be redirected to another redis server node, it does not reply the hostip, but a empty host like MOVED 3999 :6381.
The redis-cli would try to connect to an address without a host, which cause the issue:
```
127.0.0.1:7002> set bar bar
-> Redirected to slot [5061] located at :7000
Could not connect to Redis at :7000: No address associated with hostname
Could not connect to Redis at :7000: No address associated with hostname
not connected> exit
```
In this case, the redis-cli should use the previous hostip when there's no host provided by the server.
---------
Co-authored-by: Viktor Söderqvist <viktor.soderqvist@est.tech>
Co-authored-by: Madelyn Olson <madelynolson@gmail.com>
* Fix integer overflows due to using wrong integer size.
* Add assertions / panic when overflow still happens.
* Deletion of dead code to avoid need to maintain it
* Some changes are not because of bugs, but rather paranoia.
* Improve cmsgpack and cjson test coverage.
Co-authored-by: Yossi Gottlieb <yossigo@gmail.com>
Process loss of slot ownership in cluster bus
When a node no longer owns a slot, it clears the bit corresponding
to the slot in the cluster bus messages. The receiving nodes
currently don't record the fact that the sender stopped claiming
a slot until some other node in the cluster starts claiming the slot.
This can cause a slot to go missing during slot migration when subjected
to inopportune race with addition of new shards or a failover.
This fix forces the receiving nodes to process the loss of ownership
to avoid spreading wrong information.
The test fails on freebsd CI:
```
*** [err]: stats: eventloop metrics in tests/unit/info.tcl
Expected '31777' to be less than '16183' (context: type eval line 17 cmd
{assert_lessthan $el_sum2 [expr $el_sum1+10000] } proc ::test)
```
The test added in #11963, fails on freebsd CI which is slow,
increase tollerance and also add some verbose logs, now we can
see these logs in verbose mode (for better views):
```
eventloop metrics cycle1: 12, cycle2: 15
eventloop metrics el_sum1: 315, el_sum2: 411
eventloop metrics cmd_sum1: 126, cmd_sum2: 137
[ok]: stats: eventloop metrics (111 ms)
instantaneous metrics instantaneous_eventloop_cycles_per_sec: 8
instantaneous metrics instantaneous_eventloop_duration_usec: 55
[ok]: stats: instantaneous metrics (1603 ms)
[ok]: stats: debug metrics (112 ms)
```
When getKeysUsingKeySpecs processes a command with more than one key-spec,
and called with a total of more than 256 keys, it'll call getKeysPrepareResult again,
but since numkeys isn't updated, getKeysPrepareResult will not bother to copy key
names from the old result (leaving these slots uninitialized). Furthermore, it did not
consider the keys it already found when allocating more space.
Co-authored-by: Oran Agra <oran@redislabs.com>
The negative offset check was added in #9052, we realized
that this is a non-mandatory breaking change and we would
like to add it only in 8.0.
This reverts PR #9052, will be re-introduced later in 8.0.
Optimized the performance of the SCAN command in a few ways:
1. Move the key filtering (by MATCH pattern) in the scan callback,
so as to avoid collecting them for later filtering.
2. Reduce a many memory allocations and copying (use a reference
to the original sds, instead of creating an robj, an excessive 2 mallocs
and one string duplication)
3. Compare TYPE filter directly (as integers), instead of inefficient string
compare per key.
4. fixed a small bug: when scan zset and hash types, maxiterations uses
a more accurate number to avoid wrong double maxiterations.
Changes **postponed** for a later version (8.0):
1. Prepare to move the TYPE filtering to the scan callback as well. this was
put on hold since it has side effects that can be considered a breaking
change, which is that we will not attempt to do lazy expire (delete) a key
that was filtered by not matching the TYPE (changing it would mean TYPE filter
starts behaving the same as MATCH filter already does in that respect).
2. when the specified key TYPE filter is an unknown type, server will reply a error
immediately instead of doing a full scan that comes back empty handed.
Benchmark result:
For different scenarios, we obtained about 30% or more performance improvement.
Co-authored-by: Oran Agra <oran@redislabs.com>
Originally, when "tls-cluster" is enabled, `port` is set to TLS port. In order to support non-TLS clients, `pport` is used to propagate TCP port across cluster nodes. However when "tls-cluster" is disabled, `port` is set to TCP port, and `pport` is not used, which means the cluster cannot provide TLS service unless "tls-cluster" is on.
```
typedef struct {
// ...
uint16_t port; /* Latest known clients port (TLS or plain). */
uint16_t pport; /* Latest known clients plaintext port. Only used if the main clients port is for TLS. */
// ...
} clusterNode;
```
```
typedef struct {
// ...
uint16_t port; /* TCP base port number. */
uint16_t pport; /* Sender TCP plaintext port, if base port is TLS */
// ...
} clusterMsg;
```
This PR renames `port` and `pport` in `clusterNode` to `tcp_port` and `tls_port`, to record both ports no matter "tls-cluster" is enabled or disabled.
This allows to provide TLS service to clients when "tls-cluster" is disabled: when displaying cluster topology, or giving `MOVED` error, server can provide TLS or TCP port according to client's connection type, no matter what type of connection cluster bus is using.
For backwards compatibility, `port` and `pport` in `clusterMsg` are preserved, when "tls-cluster" is enabled, `port` is set to TLS port and `pport` is set to TCP port, when "tls-cluster" is disabled, `port` is set to TCP port and `pport` is set to TLS port (instead of 0).
Also, in the nodes.conf file, a new aux field displaying an extra port is added to complete the persisted info. We may have `tls_port=xxxxx` or `tcp_port=xxxxx` in the aux field, to complete the cluster topology, while the other port is stored in the normal `<ip>:<port>` field. The format is shown below.
```
<node-id> <ip>:<tcp_port>@<cport>,<hostname>,shard-id=...,tls-port=6379 myself,master - 0 0 0 connected 0-1000
```
Or we can switch the position of two ports, both can be correctly resolved.
```
<node-id> <ip>:<tls_port>@<cport>,<hostname>,shard-id=...,tcp-port=6379 myself,master - 0 0 0 connected 0-1000
```
blocking RM_Call was introduced on: #11568, It allows a module to perform
blocking commands and get the reply asynchronously.If the command gets
block, a special promise CallReply is returned that allow to set the unblock
handler. The unblock handler will be called when the command invocation
finish and it gets, as input, the command real reply.
The issue was that the real CallReply was created using a stack allocated
RedisModuleCtx which is no longer available after the unblock handler finishes.
So if the module keeps the CallReply after the unblock handler finished, the
CallReply holds a pointer to invalid memory and will try to access it when the
CallReply will be released.
The solution is to create the CallReply with a NULL context to make it totally
detached and can be freed freely when the module wants.
Test was added to cover this case, running the test with valgrind before the
fix shows the use after free error. With the fix, there are no valgrind errors.
unrelated: adding a missing `$rd close` in many tests in that file.
Apart from adding the missing coverage, this PR also adds `blockedBeforeSleep`
that gathers all block-related functions from `beforeSleep`
The order inside `blockedBeforeSleep` is different: now `handleClientsBlockedOnKeys`
(which may unblock clients) is called before `processUnblockedClients` (which handles
unblocked clients).
It makes sense to have this order.
There are no visible effects of the wrong ordering, except some cleanups of the now-unblocked
client would have happen in the next `beforeSleep` (will now happen in the current one)
The reason we even got into it is because i triggers an assertion in logresreq.c (breaking
the assumption that `unblockClient` is called **before** actually flushing the reply to the socket):
`handleClientsBlockedOnKeys` is called, then it calls `moduleUnblockClientOnKey`, which calls
`moduleUnblockClient`, which adds the client to `moduleUnblockedClients` back to `beforeSleep`,
we call `handleClientsWithPendingWritesUsingThreads`, it writes the data of buf to the client, so
`client->bufpos` became 0
On the next `beforeSleep`, we call `moduleHandleBlockedClients`, which calls `unblockClient`,
which calls `reqresAppendResponse`, triggering the assert. (because the `bufpos` is 0) - see https://github.com/redis/redis/pull/12301#discussion_r1226386716
To determine when everything was stable, we couldn't just query the nodename since they aren't API visible by design. Instead, we were using a proxy piece of information which was bumping the epoch and waiting for everyone to observe that. This works for making source Node 0 and Node 1 had pinged, and Node 0 and Node 2 had pinged, but did not guarantee that Node 1 and Node 2 had pinged. Although unlikely, this can cause this failure message. To fix it I hijacked hostnames and used its validation that it has been propagated, since we know that it is stable.
I also noticed while stress testing this sometimes the test took almost 4.5 seconds to finish, which is really close to the current 5 second limit of the log check, so I bumped that up as well just to make it a bit more consistent.
Introduced by https://github.com/redis/redis/pull/11923 (Redis 7.2 RC2)
It's very weird and counterintuitive that `RM_ReplyWithError` requires the error-code
**without** a hyphen while `RM_ReplyWithErrorFormat` requires either the error-code
**with** a hyphen or no error-code at all
```
RedisModule_ReplyWithError(ctx, "BLA bla bla");
```
vs.
```
RedisModule_ReplyWithErrorFormat(ctx, "-BLA %s", "bla bla");
```
This commit aligns RM_ReplyWithErrorFormat to behvae like RM_ReplyWithError.
it's a breaking changes but it's done before 7.2 goes GA.
When a connection that's subscribe to a channel emits PUBLISH inside MULTI-EXEC,
the push notification messes up the EXEC response.
e.g. MULTI, PING, PUSH foo bar, PING, EXEC
the EXEC's response will contain: PONG, {message foo bar}, 1. and the second PONG
will be delivered outside the EXEC's response.
Additionally, this PR changes the order of responses in case of a plain PUBLISH (when
the current client also subscribed to it), by delivering the push after the command's
response instead of before it.
This also affects modules calling RM_PublishMessage in a similar way, so that we don't
run the risk of getting that push mixed together with the module command's response.
Now we will check the offset in zrangeGenericCommand.
With a negative offset, we will throw an error and return.
This also resolve the issue of zeroing the destination key
in case of the "store" variant when we input a negative offset.
```
127.0.0.1:6379> set key value
OK
127.0.0.1:6379> zrangestore key myzset 0 10 byscore limit -1 10
(integer) 0
127.0.0.1:6379> exists key
(integer) 0
```
This change affects the following commands:
- ZRANGE / ZRANGESTORE / ZRANGEBYLEX / ZRANGEBYSCORE
- ZREVRANGE / ZREVRANGEBYSCORE / ZREVRANGEBYLEX
For geosearch and georadius we have already test coverage for wrong type, but we dont have for geodist, geohash, geopos commands. So adding the wrong type test cases for geodist, geohash, geopos commands.
Existing code, we have verify_geo_edge_response_bymember function for wrong type test cases which has member as an option. But the function is being called in other test cases where the output is not inline with these commnds(geodist, geohash, geopos). So I could not include these commands(geodist, geohash, geopos) as part of existing function, hence implemented a new function verify_geo_edge_response_generic and called from the test case.
Observed that the sanitizer reported memory leak as clean up is not done
before the process termination in negative/following cases:
**- when we passed '--invalid' as option to redis-server.**
```
-vm:~/mem-leak-issue/redis$ ./src/redis-server --invalid
*** FATAL CONFIG FILE ERROR (Redis 255.255.255) ***
Reading the configuration file, at line 2
>>> 'invalid'
Bad directive or wrong number of arguments
=================================================================
==865778==ERROR: LeakSanitizer: detected memory leaks
Direct leak of 8 byte(s) in 1 object(s) allocated from:
#0 0x7f0985f65867 in __interceptor_malloc ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:145
#1 0x558ec86686ec in ztrymalloc_usable_internal /home/ubuntu/mem-leak-issue/redis/src/zmalloc.c:117
#2 0x558ec86686ec in ztrymalloc_usable /home/ubuntu/mem-leak-issue/redis/src/zmalloc.c:135
#3 0x558ec86686ec in ztryrealloc_usable_internal /home/ubuntu/mem-leak-issue/redis/src/zmalloc.c:276
#4 0x558ec86686ec in zrealloc /home/ubuntu/mem-leak-issue/redis/src/zmalloc.c:327
#5 0x558ec865dd7e in sdssplitargs /home/ubuntu/mem-leak-issue/redis/src/sds.c:1172
#6 0x558ec87a1be7 in loadServerConfigFromString /home/ubuntu/mem-leak-issue/redis/src/config.c:472
#7 0x558ec87a13b3 in loadServerConfig /home/ubuntu/mem-leak-issue/redis/src/config.c:718
#8 0x558ec85e6f15 in main /home/ubuntu/mem-leak-issue/redis/src/server.c:7258
#9 0x7f09856e5d8f in __libc_start_call_main ../sysdeps/nptl/libc_start_call_main.h:58
SUMMARY: AddressSanitizer: 8 byte(s) leaked in 1 allocation(s).
```
**- when we pass '--port' as option and missed to add port number to redis-server.**
```
vm:~/mem-leak-issue/redis$ ./src/redis-server --port
*** FATAL CONFIG FILE ERROR (Redis 255.255.255) ***
Reading the configuration file, at line 2
>>> 'port'
wrong number of arguments
=================================================================
==865846==ERROR: LeakSanitizer: detected memory leaks
Direct leak of 8 byte(s) in 1 object(s) allocated from:
#0 0x7fdcdbb1f867 in __interceptor_malloc ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:145
#1 0x557e8b04f6ec in ztrymalloc_usable_internal /home/ubuntu/mem-leak-issue/redis/src/zmalloc.c:117
#2 0x557e8b04f6ec in ztrymalloc_usable /home/ubuntu/mem-leak-issue/redis/src/zmalloc.c:135
#3 0x557e8b04f6ec in ztryrealloc_usable_internal /home/ubuntu/mem-leak-issue/redis/src/zmalloc.c:276
#4 0x557e8b04f6ec in zrealloc /home/ubuntu/mem-leak-issue/redis/src/zmalloc.c:327
#5 0x557e8b044d7e in sdssplitargs /home/ubuntu/mem-leak-issue/redis/src/sds.c:1172
#6 0x557e8b188be7 in loadServerConfigFromString /home/ubuntu/mem-leak-issue/redis/src/config.c:472
#7 0x557e8b1883b3 in loadServerConfig /home/ubuntu/mem-leak-issue/redis/src/config.c:718
#8 0x557e8afcdf15 in main /home/ubuntu/mem-leak-issue/redis/src/server.c:7258
#9 0x7fdcdb29fd8f in __libc_start_call_main ../sysdeps/nptl/libc_start_call_main.h:58
Indirect leak of 10 byte(s) in 1 object(s) allocated from:
#0 0x7fdcdbb1fc18 in __interceptor_realloc ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:164
#1 0x557e8b04f9aa in ztryrealloc_usable_internal /home/ubuntu/mem-leak-issue/redis/src/zmalloc.c:287
#2 0x557e8b04f9aa in ztryrealloc_usable /home/ubuntu/mem-leak-issue/redis/src/zmalloc.c:317
#3 0x557e8b04f9aa in zrealloc_usable /home/ubuntu/mem-leak-issue/redis/src/zmalloc.c:342
#4 0x557e8b033f90 in _sdsMakeRoomFor /home/ubuntu/mem-leak-issue/redis/src/sds.c:271
#5 0x557e8b033f90 in sdsMakeRoomFor /home/ubuntu/mem-leak-issue/redis/src/sds.c:295
#6 0x557e8b033f90 in sdscatlen /home/ubuntu/mem-leak-issue/redis/src/sds.c:486
#7 0x557e8b044e1f in sdssplitargs /home/ubuntu/mem-leak-issue/redis/src/sds.c:1165
#8 0x557e8b188be7 in loadServerConfigFromString /home/ubuntu/mem-leak-issue/redis/src/config.c:472
#9 0x557e8b1883b3 in loadServerConfig /home/ubuntu/mem-leak-issue/redis/src/config.c:718
#10 0x557e8afcdf15 in main /home/ubuntu/mem-leak-issue/redis/src/server.c:7258
#11 0x7fdcdb29fd8f in __libc_start_call_main ../sysdeps/nptl/libc_start_call_main.h:58
SUMMARY: AddressSanitizer: 18 byte(s) leaked in 2 allocation(s).
```
As part analysis found that the sdsfreesplitres is not called when this condition checks are being hit.
Output after the fix:
```
vm:~/mem-leak-issue/redis$ ./src/redis-server --invalid
*** FATAL CONFIG FILE ERROR (Redis 255.255.255) ***
Reading the configuration file, at line 2
>>> 'invalid'
Bad directive or wrong number of arguments
vm:~/mem-leak-issue/redis$
===========================================
vm:~/mem-leak-issue/redis$ ./src/redis-server --jdhg
*** FATAL CONFIG FILE ERROR (Redis 255.255.255) ***
Reading the configuration file, at line 2
>>> 'jdhg'
Bad directive or wrong number of arguments
---------------------------------------------------------------------------
vm:~/mem-leak-issue/redis$ ./src/redis-server --port
*** FATAL CONFIG FILE ERROR (Redis 255.255.255) ***
Reading the configuration file, at line 2
>>> 'port'
wrong number of arguments
```
Co-authored-by: Oran Agra <oran@redislabs.com>
Adds API
- RedisModule_CommandFilterGetClientId()
Includes addition to commandfilter test module to validate that it works
by performing the same command from 2 different clients
This PR adds a human readable name to a node in clusters that are visible as part of error logs. This is useful so that admins and operators of Redis cluster have better visibility into failures without having to cross-reference the generated ID with some logical identifier (such as pod-ID or EC2 instance ID). This is mentioned in #8948. Specific nodenames can be set by using the variable cluster-announce-human-nodename. The nodename is gossiped using the clusterbus extension in #9530.
Co-authored-by: Madelyn Olson <madelyneolson@gmail.com>
## Issue:
When a dict has a long chain or the length of the chain is longer than
the number of samples, we will never be able to sample the elements
at the end of the chain using dictGetSomeKeys().
This could mean that SRANDMEMBER can be hang in and endless loop.
The most severe case, is the pathological case of when someone uses SCAN+DEL
or SSCAN+SREM creating an unevenly distributed dict.
This was amplified by the recent change in #11692 which prevented a
down-sizing rehashing while there is a fork.
## Solution
1. Before, we will stop sampling when we reach the maximum number
of samples, even if there is more data after the current chain.
Now when we reach the maximum we use the Reservoir Sampling
algorithm to fairly sample the end of the chain that cannot be sampled
2. Fix the rehashing code, so that the same as it allows rehashing for up-sizing
during fork when the ratio is extreme, it will allow it for down-sizing as well.
Issue was introduced (or became more severe) by #11692
Co-authored-by: Oran Agra <oran@redislabs.com>
In SPOP, when COUNT is greater than or equal to set's size,
we will remove the set. In dbDelete, we will do DEL or UNLINK
according to the lazy flag. This is also required for propagate.
In RESTORE, we won't store expired keys into the db, see #7472.
When used together with REPLACE, it should emit a DEL or UNLINK
according to the lazy flag.
This PR also adds tests to cover the propagation. The RESTORE
test will also cover #7472.
* Add command being unblocked cause another command to get unblocked execution order test
In #12301, we observed that if the
`while(listLength(server.ready_keys) != 0)`
in handleClientsBlockedOnKeys is changed to
`if(listLength(server.ready_keys) != 0)`,
the order of command execution will change.
It is wrong to change that. It means that if a command
being unblocked causes another command to get unblocked
(like a BLMOVE would do), then the new unblocked command
will wait for later to get processed rather than right away.
It'll not have any real implication if we change that since
we do call handleClientsBlockedOnKeys in beforeSleep again,
and redis will still behave correctly, but we don't change that.
An example:
1. $rd1 blmove src{t} dst{t} left right 0
2. $rd2 blmove dst{t} src{t} right left 0
3. $rd3 set key1{t}, $rd3 lpush src{t}, $rd3 set key2{t} in a pipeline
The correct order would be:
1. set key1{t}
2. lpush src{t}
3. lmove src{t} dst{t} left right
4. lmove dst{t} src{t} right left
5. set key2{t}
The wrong order would be:
1. set key1{t}
2. lpush src{t}
3. lmove src{t} dst{t} left right
4. set key2{t}
5. lmove dst{t} src{t} right left
This PR adds corresponding test to cover it.
* Add comment near while(listLength(server.ready_keys) != 0)
For the XREADGROUP BLOCK > scenario, there is an endless loop.
Due to #11012, it keep going, reprocess command -> blockForKeys -> reprocess command
The right fix is to avoid an endless loop in handleClientsBlockedOnKey and handleClientsBlockedOnKeys,
looks like there was some attempt in handleClientsBlockedOnKeys but maybe not sufficiently good,
and it looks like using a similar trick in handleClientsBlockedOnKey is complicated.
i.e. stashing the list on the stack and iterating on it after creating a fresh one for future use,
is problematic since the code keeps accessing the global list.
Co-authored-by: Oran Agra <oran@redislabs.com>
This will increase the size of an already large COB (one already passed
the threshold for disconnection)
This could also mean that we'll attempt to write that data to the socket
and the replica will manage to read it, which will result in an
undesired partial sync (undesired for the test)
In 7.2, After 971b177fa we make sure (assert) that
the duration has been recorded when resetting the client.
This is not true for rejected commands.
The use case I found is a blocking command that an ACL rule changed before
it was unblocked, and while reprocessing it, the command rejected and triggered the assert.
The PR reset the command duration inside rejectCommand / rejectCommandSds.
Co-authored-by: Oran Agra <oran@redislabs.com>
In #11963, some new tests about eventloop duration were added, which includes time measurement in TCL scripts. This has caused some unexpected CI failures, such as #12169 and #12177, due to slow test servers or some performance jittering.
Added missing test case coverage for below scenarios:
1. The command only works if all the specified slots are, from
the point of view of the node receiving the command, currently
not assigned. A node will refuse to take ownership for slots that
already belong to some other node (including itself).
2. The command fails if the same slot is specified multiple times.
This test was introduced in #12079, it works well most of the time, but
occasionally fails:
```
00:34:45> SENTINEL SIMULATE-FAILURE crash-after-election works: OK
00:34:45> SENTINEL SIMULATE-FAILURE crash-after-promotion works: FAILED: Sentinel set crash-after-promotion but did not exit
```
Don't know the reason, it may be affected by the exit of the previous
crash-after-election test. Because it doesn't really make much sense to
go deeper into it now, we re-source init-tests to get a clean environment
before each test, to try to fix this.
After applying this change, we found a new error:
```
16:39:33> SENTINEL SIMULATE-FAILURE crash-after-election works: FAILED: caught an error in the test couldn't open socket: connection refused
couldn't open socket: connection refused
```
I am guessing the sentinel triggers failover and exits before SENTINEL FAILOVER,
added a new || condition in wait_for_condition to fix it.
So far clients being blocked and unblocked by a module command would
update the c->woff variable and so WAIT was ineffective and got released
without waiting for the command actions to propagate.
This seems to have existed since forever, but not for RM_BlockClientOnKeys.
It is problematic though to know if the module did or didn't propagate
anything in that command, so for now, instead of adding an API, we'll
just update the woff to the latest offset when unblocking, this will
cause the client to possibly wait excessively, but that's not that bad.
XREAD only supports a special ID of $ and XREADGROUP only supports ^.
make sure not to suggest the wrong one when rerunning an error about unbalanced ID arguments
Co-authored-by: Oran Agra <oran@redislabs.com>
This pr can get two performance benefits:
1. Stop redundant initialization when most robj objects are created
2. LRU_CLOCK will no longer be called in io threads, so we can avoid the `atomicGet`
Another code optimization:
deleted the redundant judgment in dbSetValue, no matter in LFU or LRU, the lru field inold
robj is always the freshest (it is always updated in lookupkey), so we don't need to judge if in LFU
We add a new loglevel 'nothing' to disable logging in #12133.
This PR syncs that config change to sentinel. Because in #11214
we support modifying loglevel in runtime.
Although I think sentinel doesn't need this nothing config,
it's better to be consistent.
In #12166, we removed a call to CLUSTER SLAVES, which
then caused reply-schemas ci to fail:
```
WARNING! The following commands were not hit at all:
cluster|slaves
ERROR! at least one command was not hit by the tests
```
Because we already have command output that cover CLUSTER REPLICAS
elsewhere, here we simply add some dummy tests to fix the ci.
This commit excludes aux fields from the output of the `cluster nodes` and `cluster replicas` command.
We may decide to re-introduce them in some form or another in the future, but not in v7.2.
A single SPOP with command with count argument resulted in many SPOP
commands being propagated to the replica.
This is inefficient because the key name is repeated many times, and is also
being looked-up many times.
also it results in high QPS metrics on the replica.
To solve that, we flush batches of 1024 fields per SPOP command.
Co-authored-by: zhaozhao.zz <zhaozhao.zz@alibaba-inc.com>
For zsets that will eventually be stored as the skiplist encoding (has a dict),
we can convert it to skiplist ahead of time. This change checks the number
of arguments in the ZADD command, and converts the data-structure
if the number of new entries exceeds the listpack-max-entries configuration.
This can cause us to over-allocate memory if there are duplicate entries in the
input, which is unexpected.
For ZRANGESTORE, we know the size of the zset, so we can expand
the dict in advance, to avoid the temporary dict from being rehashed
while it grows.
Simple benchmarks shows it provides some 4% improvement in ZADD and 20% in ZRANGESTORE
Current tests for BITFIELD_RO command are skipped in the external mode,
and therefore reply-schemas-validator reports a coverage error.
This PR adds basic tests to increase coverage.
Extend SENTINEL CONFIG SET and SENTINEL CONFIG GET to be
compatible with variadic CONFIG SET and CONFIG GET and allow multiple
parameters to be modified in a single call atomically.
Co-authored-by: Oran Agra <oran@redislabs.com>
The measured latency(duration) includes the list below, which can be shown by `INFO STATS`.
```
eventloop_cycles // ever increasing counter
eventloop_duration_sum // cumulative duration of eventloop in microseconds
eventloop_duration_cmd_sum // cumulative duration of executing commands in microseconds
instantaneous_eventloop_cycles_per_sec // average eventloop count per second in recent 1.6s
instantaneous_eventloop_duration_usec // average single eventloop duration in recent 1.6s
```
Also added some experimental metrics, which are shown only when `INFO DEBUG` is called.
This section isn't included in the default INFO, or even in `INFO ALL` and the fields in this section
can change in the future without considering backwards compatibility.
```
eventloop_duration_aof_sum // cumulative duration of writing AOF
eventloop_duration_cron_sum // cumulative duration cron jobs (serverCron, beforeSleep excluding IO and AOF)
eventloop_cmd_per_cycle_max // max number of commands executed in one eventloop
eventloop_duration_max // max duration of one eventloop
```
All of these are being reset by CONFIG RESETSTAT
The test failed on MacOS:
```
*** [err]: EXPIRE precision is now the millisecond in tests/unit/expire.tcl
Expected 'somevalue {}' to equal or match '{} {}'
```
`set a [r get x]`, even though we tried 10 times, sometimes we
still get {}, this is a time-sensitive test.
In this PR, we add the following changes:
1. More attempts, change it from 10 to 30.
2. More tolerant, change the `after 900` to `after 800`.
In addition, we judging $a in advance and changing `after 1100`
to `after 300`, this will save us some times.
When `RM_ZsetAdd()`/`RM_ZsetIncrby()`/`RM_StreamAdd()` fails, if a new key happens to
be created using `moduleCreateEmptyKey()`, we should clean up the empty key.
## Test
1) Add new module commands(`zset.add` and `zset.incrby`) to cover `RM_ZsetAdd()`/`RM_ZsetIncrby()`.
2) Add a large-memory test to cover `RM_StreamAdd()`.
When master reboot from RDB, if rsi in RDB is valid we should not free replication backlog, even if master_repl_offset or repl-offset is 0.
Since if master doesn't send any data to replicas master_repl_offset is 0, it's a valid number.
A clear example:
1. start a master and apply some write commands, the master's master_repl_offset is 0 since it has no replicas.
2. stop write commands on master, and start another instance and replicaof the master, trigger an FULLRESYNC
3. the master's master_repl_offset is still 0 (set a large number for repl-ping-replica-period), do BGSAVE and restart the master
4. master load master_repl_offset from RDB's rsi and it's still 0, and we should make sure replica can partially resync with master.
Tests occasionally fail since #12000:
```
*** [err]: query buffer resized correctly when not idle in tests/unit/querybuf.tcl
Expected 0 > 32768 (context: type eval line 11 cmd {assert {$orig_test_client_qbuf > 32768}} proc ::test)
*** [err]: query buffer resized correctly with fat argv in tests/unit/querybuf.tcl
query buffer should not be resized when client idle time smaller than 2s
```
The reason may be because we set hz to 100, querybuf shrinks before we count
client_query_buffer. We avoid this problem by setting pause-cron to 1.
1. reset the readraw mode after a test that uses it. undetected since the
only test after that on the same server didn't read any replies.
2. fix a cross slot issue that was undetected in cluster mode because
readraw doesn't throw exceptions on errors.
Technically declaring a prototype with an empty declaration has been deprecated since the early days of C, but we never got a warning for it. C2x will apparently be introducing a breaking change if you are using this type of declarator, so Clang 15 has started issuing a warning with -pedantic. Although not apparently a problem for any of the compiler we build on, if feels like the right thing is to properly adhere to the C standard and use (void).
The change in #12018 break the CI (fixed by #12083).
There are quite a few sentinel commands that are missing both test coverage and also schema.
PR added reply-schema to the following commands:
- sentinel debug
- sentinel info-cache
- sentinel pendding-scripts
- sentinel reset
- sentinel simulate-failure
Added some very basic tests for other sentinel commands, just so that they have some coverage.
- sentinel help
- sentinel masters
- sentinel myid
- sentinel sentinels
- sentinel slaves
These tests should be improved / replaced in a followup PR.
Minor test case addition for DECR and DECRBY.
Currently DECR and DECRBY do not have test case coverage for the
scenarios where they run on a non-existing key.
In order to speed up tests, avoid saving an RDB (mostly notable on shutdown),
except for tests that explicitly test the RDB mechanism
In addition, use `shutdown-on-sigterm force` to prevetn shutdown from failing
in case the server is in the middle of the initial AOFRW
Also a a test that checks that the `shutdown-on-sigterm default` is to refuse
shutdown if there's an initial AOFRW
Co-authored-by: Guy Benoish <guy.benoish@redislabs.com>
This PR is to fix the compilation warnings and errors generated by the latest
complier toolchain, and to add a new runner of the latest toolchain for daily CI.
## Fix various compilation warnings and errors
1) jemalloc.c
COMPILER: clang-14 with FORTIFY_SOURCE
WARNING:
```
src/jemalloc.c:1028:7: warning: suspicious concatenation of string literals in an array initialization; did you mean to separate the elements with a comma? [-Wstring-concatenation]
"/etc/malloc.conf",
^
src/jemalloc.c:1027:3: note: place parentheses around the string literal to silence warning
"\"name\" of the file referenced by the symbolic link named "
^
```
REASON: the compiler to alert developers to potential issues with string concatenation
that may miss a comma,
just like #9534 which misses a comma.
SOLUTION: use `()` to tell the compiler that these two line strings are continuous.
2) config.h
COMPILER: clang-14 with FORTIFY_SOURCE
WARNING:
```
In file included from quicklist.c:36:
./config.h:319:76: warning: attribute declaration must precede definition [-Wignored-attributes]
char *strcat(char *restrict dest, const char *restrict src) __attribute__((deprecated("please avoid use of unsafe C functions. prefer use of redis_strlcat instead")));
```
REASON: Enabling _FORTIFY_SOURCE will cause the compiler to use `strcpy()` with check,
it results in a deprecated attribute declaration after including <features.h>.
SOLUTION: move the deprecated attribute declaration from config.h to fmacro.h before "#include <features.h>".
3) networking.c
COMPILER: GCC-12
WARNING:
```
networking.c: In function ‘addReplyDouble.part.0’:
networking.c:876:21: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=]
876 | dbuf[start] = '$';
| ^
networking.c:868:14: note: at offset -5 into destination object ‘dbuf’ of size 5152
868 | char dbuf[MAX_LONG_DOUBLE_CHARS+32];
| ^
networking.c:876:21: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=]
876 | dbuf[start] = '$';
| ^
networking.c:868:14: note: at offset -6 into destination object ‘dbuf’ of size 5152
868 | char dbuf[MAX_LONG_DOUBLE_CHARS+32];
```
REASON: GCC-12 predicts that digits10() may return 9 or 10 through `return 9 + (v >= 1000000000UL)`.
SOLUTION: add an assert to let the compiler know the possible length;
4) redis-cli.c & redis-benchmark.c
COMPILER: clang-14 with FORTIFY_SOURCE
WARNING:
```
redis-benchmark.c:1621:2: warning: embedding a directive within macro arguments has undefined behavior [-Wembedded-directive] #ifdef USE_OPENSSL
redis-cli.c:3015:2: warning: embedding a directive within macro arguments has undefined behavior [-Wembedded-directive] #ifdef USE_OPENSSL
```
REASON: when _FORTIFY_SOURCE is enabled, the compiler will use the print() with
check, which is a macro. this may result in the use of directives within the macro, which
is undefined behavior.
SOLUTION: move the directives-related code out of `print()`.
5) server.c
COMPILER: gcc-13 with FORTIFY_SOURCE
WARNING:
```
In function 'lookupCommandLogic',
inlined from 'lookupCommandBySdsLogic' at server.c:3139:32:
server.c:3102:66: error: '*(robj **)argv' may be used uninitialized [-Werror=maybe-uninitialized]
3102 | struct redisCommand *base_cmd = dictFetchValue(commands, argv[0]->ptr);
| ~~~~^~~
```
REASON: The compiler thinks that the `argc` returned by `sdssplitlen()` could be 0,
resulting in an empty array of size 0 being passed to lookupCommandLogic.
this should be a false positive, `argc` can't be 0 when strings are not NULL.
SOLUTION: add an assert to let the compiler know that `argc` is positive.
6) sha1.c
COMPILER: gcc-12
WARNING:
```
In function ‘SHA1Update’,
inlined from ‘SHA1Final’ at sha1.c:195:5:
sha1.c:152:13: warning: ‘SHA1Transform’ reading 64 bytes from a region of size 0 [-Wstringop-overread]
152 | SHA1Transform(context->state, &data[i]);
| ^
sha1.c:152:13: note: referencing argument 2 of type ‘const unsigned char[64]’
sha1.c: In function ‘SHA1Final’:
sha1.c:56:6: note: in a call to function ‘SHA1Transform’
56 | void SHA1Transform(uint32_t state[5], const unsigned char buffer[64])
| ^
In function ‘SHA1Update’,
inlined from ‘SHA1Final’ at sha1.c:198:9:
sha1.c:152:13: warning: ‘SHA1Transform’ reading 64 bytes from a region of size 0 [-Wstringop-overread]
152 | SHA1Transform(context->state, &data[i]);
| ^
sha1.c:152:13: note: referencing argument 2 of type ‘const unsigned char[64]’
sha1.c: In function ‘SHA1Final’:
sha1.c:56:6: note: in a call to function ‘SHA1Transform’
56 | void SHA1Transform(uint32_t state[5], const unsigned char buffer[64])
```
REASON: due to the bug[https://gcc.gnu.org/bugzilla/show_bug.cgi?id=80922], when
enable LTO, gcc-12 will not see `diagnostic ignored "-Wstringop-overread"`, resulting in a warning.
SOLUTION: temporarily set SHA1Update to noinline to avoid compiler warnings due
to LTO being enabled until the above gcc bug is fixed.
7) zmalloc.h
COMPILER: GCC-12
WARNING:
```
In function ‘memset’,
inlined from ‘moduleCreateContext’ at module.c:877:5,
inlined from ‘RM_GetDetachedThreadSafeContext’ at module.c:8410:5:
/usr/include/x86_64-linux-gnu/bits/string_fortified.h:59:10: warning: ‘__builtin_memset’ writing 104 bytes into a region of size 0 overflows the destination [-Wstringop-overflow=]
59 | return __builtin___memset_chk (__dest, __ch, __len,
```
REASON: due to the GCC-12 bug [https://gcc.gnu.org/bugzilla/show_bug.cgi?id=96503],
GCC-12 cannot see alloc_size, which causes GCC to think that the actual size of memory
is 0 when checking with __glibc_objsize0().
SOLUTION: temporarily set malloc-related interfaces to `noinline` to avoid compiler warnings
due to LTO being enabled until the above gcc bug is fixed.
## Other changes
1) Fixed `ps -p [pid]` doesn't output `<defunct>` when using procps 4.x causing `replication
child dies when parent is killed - diskless` test to fail.
2) Add a new fortify CI with GCC-13 and ubuntu-lunar docker image.
Minor test case addition.
Currently GETRANGE command does not have the test case coverage for the scenarios:
An error is returned when key exists but of different type
Added missing test cases for getrange command.
this pr fix two wrongs：
1. When client’s querybuf is pre-allocated for a fat argv, we need to update the
querybuf_peak of the client immediately to completely avoid the unexpected
shrinking of querybuf in the next clientCron (before data arrives to set the peak).
2. the protocol's bulklen does not include `\r\n`, but the allocation and the data we
read does. so in `clientsCronResizeQueryBuffer`, the `resize` or `querybuf_peak`
should add these 2 bytes.
the first bug is likely to hit us on large payloads over slow connections, in which case
transferring the payload can take longer and a cron event will be triggered (specifically
if there are not a lot of clients)
There is are some missing test cases for SUBSTR command.
These might already be covered by GETRANGE, but no harm in adding them since they're simple.
Added 3 test case.
* start > stop
* start and stop both greater than string length
* when no key is present.
Currently LINSERT command does not have the test case coverage for following scenarios.
1. When key does not exist, it is considered an empty list and no operation is performed.
2. An error is returned when key exists but does not hold a list value.
Added above two missing test cases for linsert command.
* Add RM_ReplyWithErrorFormat that can support format
Reply with the error create from a printf format and arguments.
If the error code is already passed in the string 'fmt', the error
code provided is used, otherwise the string "-ERR " for the generic
error code is automatically added.
The usage is, for example:
RedisModule_ReplyWithErrorFormat(ctx, "An error: %s", "foo");
RedisModule_ReplyWithErrorFormat(ctx, "-WRONGTYPE Wrong Type: %s", "foo");
The function always returns REDISMODULE_OK.
The MacOS CI in github actions often hangs without any logs. GH argues that
it's due to resource utilization, either running out of disk space, memory, or CPU
starvation, and thus the runner is terminated.
This PR contains multiple attempts to resolve this:
1. introducing pause_process instead of SIGSTOP, which waits for the process
to stop before resuming the test, possibly resolving race conditions in some tests,
this was a suspect since there was one test that could result in an infinite loop in that
case, in practice this didn't help, but still a good idea to keep.
2. disable the `save` config in many tests that don't need it, specifically ones that use
heavy writes and could create large files.
3. change the `populate` proc to use short pipeline rather than an infinite one.
4. use `--clients 1` in the macos CI so that we don't risk running multiple resource
demanding tests in parallel.
5. enable `--verbose` to be repeated to elevate verbosity and print more info to stdout
when a test or a server starts.
We do have ZREMRANGEBYLEX tests, but it is a stress test
marked with slow tag and then skipped in reply-schemas daily.
In the past, we were able to succeed on a daily, i guess
it was because there were some random command executions,
such as corrupt-dump-fuzzy, which might call it.
These test examples are taken from ZRANGEBYLEX basics test.
Add `RM_RdbLoad()` and `RM_RdbSave()` to load/save RDB files from the module API.
In our use case, we have our clustering implementation as a module. As part of this
implementation, the module needs to trigger RDB save operation at specific points.
Also, this module delivers RDB files to other nodes (not using Redis' replication).
When a node receives an RDB file, it should be able to load the RDB. Currently,
there is no module API to save/load RDB files.
This PR adds four new APIs:
```c
RedisModuleRdbStream *RM_RdbStreamCreateFromFile(const char *filename);
void RM_RdbStreamFree(RedisModuleRdbStream *stream);
int RM_RdbLoad(RedisModuleCtx *ctx, RedisModuleRdbStream *stream, int flags);
int RM_RdbSave(RedisModuleCtx *ctx, RedisModuleRdbStream *stream, int flags);
```
The first step is to create a `RedisModuleRdbStream` object. This PR provides a function to
create RedisModuleRdbStream from the filename. (You can load/save RDB with the filename).
In the future, this API can be extended if needed:
e.g., `RM_RdbStreamCreateFromFd()`, `RM_RdbStreamCreateFromSocket()` to save/load
RDB from an `fd` or a `socket`.
Usage:
```c
/* Save RDB */
RedisModuleRdbStream *stream = RedisModule_RdbStreamCreateFromFile("example.rdb");
RedisModule_RdbSave(ctx, stream, 0);
RedisModule_RdbStreamFree(stream);
/* Load RDB */
RedisModuleRdbStream *stream = RedisModule_RdbStreamCreateFromFile("example.rdb");
RedisModule_RdbLoad(ctx, stream, 0);
RedisModule_RdbStreamFree(stream);
```
The existing logic for killing pub-sub clients did not handle the `allchannels`
permission correctly. For example, if you:
ACL SETUSER foo allchannels
Have a client authenticate as the user `foo` and subscribe to a channel, and then:
ACL SETUSER foo resetchannels
The subscribed client would not be disconnected, though new clients under that user
would be blocked from subscribing to any channels.
This was caused by an incomplete optimization in `ACLKillPubsubClientsIfNeeded`
checking whether the new channel permissions were a strict superset of the old ones.
Now that the command argument specs are available at runtime (#9656), this PR addresses
#8084 by implementing a complete solution for command-line hinting in `redis-cli`.
It correctly handles nearly every case in Redis's complex command argument definitions, including
`BLOCK` and `ONEOF` arguments, reordering of optional arguments, and repeated arguments
(even when followed by mandatory arguments). It also validates numerically-typed arguments.
It may not correctly handle all possible combinations of those, but overall it is quite robust.
Arguments are only matched after the space bar is typed, so partial word matching is not
supported - that proved to be more confusing than helpful. When the user's current input
cannot be matched against the argument specs, hinting is disabled.
Partial support has been implemented for legacy (pre-7.0) servers that do not support
`COMMAND DOCS`, by falling back to a statically-compiled command argument table.
On startup, if the server does not support `COMMAND DOCS`, `redis-cli` will now issue
an `INFO SERVER` command to retrieve the server version (unless `HELLO` has already
been sent, in which case the server version will be extracted from the reply to `HELLO`).
The server version will be used to filter the commands and arguments in the command table,
removing those not supported by that version of the server. However, the static table only
includes core Redis commands, so with a legacy server hinting will not be supported for
module commands. The auto generated help.h and the scripts that generates it are gone.
Command and argument tables for the server and CLI use different structs, due primarily
to the need to support different runtime data. In order to generate code for both, macros
have been added to `commands.def` (previously `commands.c`) to make it possible to
configure the code generation differently for different use cases (one linked with redis-server,
and one with redis-cli).
Also adding a basic testing framework for the command hints based on new (undocumented)
command line options to `redis-cli`: `--test_hint 'INPUT'` prints out the command-line hint for
a given input string, and `--test_hint_file <filename>` runs a suite of test cases for the hinting
mechanism. The test suite is in `tests/assets/test_cli_hint_suite.txt`, and it is run from
`tests/integration/redis-cli.tcl`.
Co-authored-by: Oran Agra <oran@redislabs.com>
Co-authored-by: Viktor Söderqvist <viktor.soderqvist@est.tech>
This is an attempt to normalize/formalize command summaries.
Main actions performed:
* Starts with the continuation of the phrase "The XXXX command, when called, ..." for user commands.
* Starts with "An internal command...", "A container command...", etc... when applicable.
* Always uses periods.
* Refrains from referring to other commands. If this is needed, backquotes should be used for command names.
* Tries to be very clear about the data type when applicable.
* Tries to mention additional effects, e.g. "The key is created if it doesn't exist" and "The set is deleted if the last member is removed."
* Prefers being terse over verbose.
* Tries to be consistent.
This PR fix several unrelated bugs that were discovered by the same set of tests
(WAITAOF tests in #11713), could make the `WAITAOF` test hang.
The change in `backgroundRewriteDoneHandler` is about MP-AOF.
That leftover / old code assumes that we started a new AOF file just now
(when we have a new base into which we're gonna incrementally write), but
the fact is that with MP-AOF, the fork done handler doesn't really affect the
incremental file being maintained by the parent process, there's no reason to
re-issue `SELECT`, and no reason to update any of the fsync variables in that flow.
This should have been deleted with MP-AOF (introduced in #9788, 7.0).
The damage is that the update to `aof_fsync_offset` will cause us to miss an fsync
in `flushAppendOnlyFile`, that happens if we stop write commands in `AOF_FSYNC_EVERYSEC`
while an AOFRW is in progress. This caused a new `WAITAOF` test to sometime hang forever.
Also because of MP-AOF, we needed to change `aof_fsync_offset` to `aof_last_incr_fsync_offset`
and match it to `aof_last_incr_size` in `flushAppendOnlyFile`. This is because in the past we compared
`aof_fsync_offset` and `aof_current_size`, but with MP-AOF it could be the total AOF file will be
smaller after AOFRW, and the (already existing) incr file still has data that needs to be fsynced.
The change in `flushAppendOnlyFile`, about the `AOF_FSYNC_ALWAYS`, it is follow #6053
(the details is in #5985), we also check `AOF_FSYNC_ALWAYS` to handle a case where
appendfsync is changed from everysec to always while there is data that's written but not yet fsynced.
This test fails sporadically:
```
*** [err]: Migrate the last slot away from a node using redis-cli in tests/unit/cluster/cli.tcl
cluster size did not reach a consistent size 4
```
I guess the time (5s) of wait_for_cluster_size is not enough,
usually, the waiting time for our other tests for cluster
consistency is 50s, so also changing it to 50s.
Since we remove the COMMAND COUNT call in sentinel test in #11950,
reply-schemas-validator started reporting this error:
```
WARNING! The following commands were not hit at all:
command|count
ERROR! at least one command was not hit by the tests
```
This PR add a COMMAND COUNT test to cover it and also fix some
typos in req-res-log-validator.py
The sanity check test intention was to detect that when a command is
added to sentinel it is on purpose. This test is easily broken, like
CLIENT SETINFO introduced by #11758.
We replace it with a test that validates that a few specific commands
are either there or missing (to test the infrastructure works correctly).
This PR allows clients to send information about the client library to redis
to be displayed in CLIENT LIST and CLIENT INFO.
Currently supports:
`CLIENT [lib-name | lib-ver] <value>`
Client libraries are expected to pipeline these right after AUTH, and ignore
the failure in case they're talking to an older version of redis.
These will be shown in CLIENT LIST and CLIENT INFO as:
* `lib-name` - meant to hold the client library name.
* `lib-ver` - meant to hold the client library version.
The values cannot contain spaces, newlines and any wild ASCII characters,
but all other normal chars are accepted, e.g `.`, `=` etc (same as CLIENT NAME).
The RESET command does NOT clear these, but they can be cleared to the
default by sending a command with a blank string.
Co-authored-by: Oran Agra <oran@redislabs.com>
This allows modules to register commands to existing ACL categories and blocks the creation of [sub]commands, datatypes and registering the configs outside of the OnLoad function.
For allowing modules to register commands to existing ACL categories,
This PR implements a new API int RM_SetCommandACLCategories() which takes a pointer to a RedisModuleCommand and a C string aclflags containing the set of space separated ACL categories.
Example, 'write slow' marks the command as part of the write and slow ACL categories.
The C string aclflags is tokenized by implementing a helper function categoryFlagsFromString(). Theses tokens are matched and the corresponding ACL categories flags are set by a helper function matchAclCategoriesFlags. The helper function categoryFlagsFromString() returns the corresponding categories_flags or returns -1 if some token not processed correctly.
If the module contains commands which are registered to existing ACL categories, the number of [sub]commands are tracked by num_commands_with_acl_categories in struct RedisModule. Further, the allowed command bit-map of the existing users are recomputed from the command_rules list, by implementing a function called ACLRecomputeCommandBitsFromCommandRulesAllUsers() for the existing users to have access to the module commands on runtime.
## Breaking change
This change requires that registering commands and subcommands only occur during a modules "OnLoad" function, in order to allow efficient recompilation of ACL bits. We also chose to block registering configs and types, since we believe it's only valid for those to be created during onLoad. We check for this onload flag in struct RedisModule to check if the call is made from the OnLoad function.
Co-authored-by: Madelyn Olson <madelyneolson@gmail.com>
I saw this error once, in the FreeBSD Daily CI:
```
*** [err]: Temp rdb will be deleted if we use bg_unlink when shutdown in tests/unit/shutdown.tcl
Expected [file exists /xxx/temp-10336.rdb] (context: type eval line 15 cmd {assert {[file exists $temp_rdb]}} proc ::test)
```
The log shows that bgsave was executed, and it was successfully executed in the end:
```
Starting test Temp rdb will be deleted if we use bg_unlink when shutdown in tests/unit/shutdown.tcl
10251:M 22 Feb 2023 11:37:25.441 * Background saving started by pid 10336
10336:C 22 Feb 2023 11:37:27.949 * DB saved on disk
10336:C 22 Feb 2023 11:37:27.949 * Fork CoW for RDB: current 0 MB, peak 0 MB, average 0 MB
10251:M 22 Feb 2023 11:37:28.060 * Background saving terminated with success
```
There may be two reasons:
1. The child process has been created, but it has not created
the temp rdb file yet, so [file exists $temp_rdb] check failed.
2. The child process bgsave has been executed successfully and the
temp file has been deleted, so [file exists $temp_rdb] check failed.
From the logs pint, it should be the case 2, case 1 is too extreme,
set rdb-key-save-delay to a higher value to ensure bgsave does not
succeed early to avoid this case.
