The temporary array for deleted entries reply of XAUTOCLAIM was
insufficient, but also in fact the COUNT argument should be used to
control the size of the reply, so instead of terminating the loop by
only counting the claimed entries, we'll count deleted entries as well.
Fix#10968
Addresses CVE-2022-31144
In the newly added cluster hostnames test, the primary is failing over during the reboot
for valgrind so we are validating the wrong node. This change just sets the replica to
prevent taking over, which seems to fix the test.
We could have also set the timeout higher, but it slows down the test.
In #9389, we add a new `cluster-port` config and make cluster bus port configurable,
and currently redis-cli --cluster create/add-node doesn't support with a configurable `cluster-port` instance.
Because redis-cli uses the old way (port + 10000) to send the `CLUSTER MEET` command.
Now we add this support on redis-cli `--cluster`, note we don't need to explicitly pass in the
`cluster-port` parameter, we can get the real `cluster-port` of the node in `clusterManagerNodeLoadInfo`,
so the `--cluster create` and `--cluster add-node` interfaces have not changed.
We will use the `cluster-port` when we are doing `CLUSTER MEET`, also note that `CLUSTER MEET` bus-port
parameter was added in 4.0, so if the bus_port (the one in redis-cli) is 0, or equal (port + 10000),
we just call `CLUSTER MEET` with 2 arguments, using the old form.
Co-authored-by: Madelyn Olson <34459052+madolson@users.noreply.github.com>
Account sharded pubsub channels memory consumption in client memory usage
computation to accurately evict client based on the set threshold for `maxmemory-clients`.
When calling CLIENT INFO/LIST, and in various debug prints, Redis is printing
the number of pubsub channels / patterns the client is subscribed to.
With the addition of sharded pubsub, it would be useful to print the number of
keychannels the client is subscribed to as well.
Since the ranges of `unsigned long long` and `long long` are different, we cannot read an
`unsigned long long` integer from a `RedisModuleString` by `RedisModule_StringToLongLong` .
So I added two new Redis Module APIs to support the conversion between these two types:
* `RedisModule_StringToULongLong`
* `RedisModule_CreateStringFromULongLong`
Signed-off-by: RinChanNOWWW <hzy427@gmail.com>
This commit has two topics.
## Passing config name and value in the same arg
In #10660 (Redis 7.0.1), when we supported the config values that can start with `--` prefix (one of the two topics of that PR),
we broke another pattern: `redis-server redis.config "name value"`, passing both config name
and it's value in the same arg, see #10865
This wasn't a intended change (i.e we didn't realize this pattern used to work).
Although this is a wrong usage, we still like to fix it.
Now we support something like:
```
src/redis-server redis.conf "--maxmemory '700mb'" "--maxmemory-policy volatile-lru" --proc-title-template --my--title--template --loglevel verbose
```
## Changes around --save
Also in this PR, we undo the breaking change we made in #10660 on purpose.
1. `redis-server redis.conf --save --loglevel verbose` (missing `save` argument before anotehr argument).
In 7.0.1, it was throwing an wrong arg error.
Now it will work and reset the save, similar to how it used to be in 7.0.0 and 6.2.x.
3. `redis-server redis.conf --loglevel verbose --save` (missing `save` argument as last argument).
In 6.2, it did not reset the save, which was a bug (inconsistent with the previous bullet).
Now we will make it work and reset the save as well (a bug fix).
The PR fixes 2 issues:
### RM_Call crash on script mode
`RM_Call` can potentially be called from a background thread where `server.current_client`
are not set. In such case we get a crash on `NULL` dereference.
The fix is to check first if `server.current_client` is `NULL`, if it does we should
verify disc errors and readonly replica as we do to any normal clients (no masters nor AOF).
### RM_Call block OOM commands when not needed
Again `RM_Call` can be executed on a background thread using a `ThreadSafeCtx`.
In such case `server.pre_command_oom_state` can be irrelevant and should not be
considered when check OOM state. This cause OOM commands to be blocked when
not necessarily needed.
In such case, check the actual used memory (and not the cached value). Notice that in
order to know if the cached value can be used, we check that the ctx that was used on
the `RM_Call` is a ThreadSafeCtx. Module writer can potentially abuse the API and use
ThreadSafeCtx on the main thread. We consider this as a API miss used.
when we know the size of the zset we're gonna store in advance,
we can check if it's greater than the listpack encoding threshold,
in which case we can create a skiplist from the get go, and avoid
converting the listpack to skiplist later after it was already populated.
If a script made a modification and then was interrupted for taking too long.
there's a chance redis will detect that a replica dropped and would like to reject
write commands with NOREPLICAS due to insufficient good replicas.
returning an error on a command in this case breaks the script atomicity.
The same could in theory happen with READONLY, MISCONF, but i don't think
these state changes can happen during script execution.
I noticed that scripting.tcl uses INFO from within a script and thought it's an
overkill and concluded it's nicer to use another CMD_STALE command,
decided to use ECHO, and then noticed it's not at all allowed in stale mode.
probably overlooked at #6843
The SET and BITFIELD command were added `get_keys_function` in #10148, causing
them to be wrongly marked movablekeys in `populateCommandMovableKeys`.
This was an unintended side effect introduced in #10148 (7.0 RC1)
which could cause some clients an extra round trip for these commands in cluster mode.
Since we define movablekeys as a way to determine if the legacy range [first, last, step]
doesn't find all keys, then we need a completely different approach.
The right approach should be to check if the legacy range covers all key-specs,
and if none of the key-specs have the INCOMPLETE flag.
This way, we don't need to look at getkeys_proc of VARIABLE_FLAG at all.
Probably with the exception of modules, who may still not be using key-specs.
In this PR, we removed `populateCommandMovableKeys` and put its logic in
`populateCommandLegacyRangeSpec`.
In order to properly serve both old and new modules, we must probably keep relying
CMD_MODULE_GETKEYS, but do that only for modules that don't declare key-specs.
For ones that do, we need to take the same approach we take with native redis commands.
This approach was proposed by Oran. Fixes#10833
Co-authored-by: Oran Agra <oran@redislabs.com>
Redis 7 adds some new alias config like `hash-max-listpack-entries` alias `hash-max-ziplist-entries`.
If a config file contains both real name and alias like this:
```
hash-max-listpack-entries 20
hash-max-ziplist-entries 20
```
after set `hash-max-listpack-entries` to 100 and `config rewrite`, the config file becomes to:
```
hash-max-listpack-entries 100
hash-max-ziplist-entries 20
```
we can see that the alias config is not modified, and users will get wrong config after restart.
6.0 and 6.2 doesn't have this bug, since they only have the `slave` word alias.
Co-authored-by: Oran Agra <oran@redislabs.com>
A regression from #10285 (redis 7.0).
CONFIG REWRITE would put lines with: `include`, `rename-command`,
`user`, `loadmodule`, and any module specific config in a comment.
For ACL `user`, `loadmodule` and module specific configs would be
re-inserted at the end (instead of updating existing lines), so the only
implication is a messy config file full of comments.
But for `rename-command` and `include`, the implication would be that
they're now missing, so a server restart would lose them.
Co-authored-by: Oran Agra <oran@redislabs.com>
The important part is that read-only scripts (not just EVAL_RO
and FCALL_RO, but also ones with `no-writes` executed by normal EVAL or
FCALL), will now be permitted to run during CLIENT PAUSE WRITE (unlike
before where only the _RO commands would be processed).
Other than that, some errors like OOM, READONLY, MASTERDOWN are now
handled by processCommand, rather than the command itself affects the
error string (and even error code in some cases), and command stats.
Besides that, now the `may-replicate` commands, PFCOUNT and PUBLISH, will
be considered `write` commands in scripts and will be blocked in all
read-only scripts just like other write commands.
They'll also be blocked in EVAL_RO (i.e. even for scripts without the
`no-writes` shebang flag.
This commit also hides the `may_replicate` flag from the COMMAND command
output. this is a **breaking change**.
background about may_replicate:
We don't want to expose a no-may-replicate flag or alike to scripts, since we
consider the may-replicate thing an internal concern of redis, that we may
some day get rid of.
In fact, the may-replicate flag was initially introduced to flag EVAL: since
we didn't know what it's gonna do ahead of execution, before function-flags
existed). PUBLISH and PFCOUNT, both of which because they have side effects
which may some day be fixed differently.
code changes:
The changes in eval.c are mostly code re-ordering:
- evalCalcFunctionName is extracted out of evalGenericCommand
- evalExtractShebangFlags is extracted luaCreateFunction
- evalGetCommandFlags is new code
* Fix broken protocol when redis can't persist to RDB (general commands, not
modules), excessive newline. regression of #10372 (7.0 RC3)
* Fix broken protocol when Redis can't persist to AOF (modules and
scripts), missing newline.
* Fix bug in OOM check of EVAL scripts called from RM_Call.
set the cached OOM state for scripts before executing module commands too,
so that it can serve scripts that are executed by modules.
i.e. in the past EVAL executed by RM_Call could have either falsely
fail or falsely succeeded because of a wrong cached OOM state flag.
* Fix bugs with RM_Yield:
1. SHUTDOWN should only accept the NOSAVE mode
2. Avoid eviction during yield command processing.
3. Avoid processing master client commands while yielding from another client
* Add new two more checks to RM_Call script mode.
1. READONLY You can't write against a read only replica
2. MASTERDOWN Link with MASTER is down and `replica-serve-stale-data` is set to `no`
* Add new RM_Call flag to let redis automatically refuse `deny-oom` commands
while over the memory limit.
* Add tests to cover various errors from Scripts, Modules, Modules
calling scripts, and Modules calling commands in script mode.
Add tests:
* Looks like the MISCONF error was completely uncovered by the tests,
add tests for it, including from scripts, and modules
* Add tests for NOREPLICAS from scripts
* Add tests for the various errors in module RM_Call, including RM_Call that
calls EVAL, and RM_call in "eval mode". that includes:
NOREPLICAS, READONLY, MASTERDOWN, MISCONF
To easily distinguish between sharded channel message and a global
channel message, introducing `smessage` (instead of `message`) as
message bulk for sharded channel publish message.
This is gonna be a breaking change in 7.0.1!
Background:
Sharded pubsub introduced in redis 7.0, but after the release we quickly
realized that the fact that it's problematic that the client can't distinguish
between normal (global) pubsub messages and sharded ones.
This is important because the same connection can subscribe to both,
but messages sent to one pubsub system are not propagated to the
other (they're completely separate), so if one connection is used to
subscribe to both, we need to assist the client library to know which
message it got so it can forward it to the correct callback.
When `zrangestore` is called container destination object is created.
Before this PR we used to create a listpack based object even if `zset-max-ziplist-entries`
or equivalent`zset-max-listpack-entries` was set to 0.
This triggered immediate conversion of the listpack into a skiplist in `zrangestore`, which hits
an assertion resulting in an engine crash.
Added a TCL test that reproduces this issue.
This bug was introduced in #9484 (7.0.0).
It result that BZMPOP blocked on non-key arguments.
Like `bzmpop 0 1 myzset min count 10`, this command will additionally
block in these keys (except for the first and the last argument) and can return their values:
- 0: timeout value
- 1: numkeys value
- min: min/max token
- count: count token
Scripts that have the `no-writes` flag, cannot execute write commands,
and since all `deny-oom` commands are write commands, we now act
as if the `allow-oom` flag is implicitly set for scripts that set the `no-writes` flag.
this also implicitly means that the EVAL*_RO and FCALL_RO commands can
never fails with OOM error.
Note about a bug that's no longer relevant:
There was an issue with EVAL*_RO using shebang not being blocked correctly
in OOM state:
When an EVAL script declares a shebang, it was by default not allowed to run in
OOM state.
but this depends on a flag that is updated before the command is executed, which
was not updated in case of the `_RO` variants.
the result is that if the previous cached state was outdated (either true or false),
the script will either unjustly fail with OOM, or unjustly allowed to run despite
the OOM state.
It doesn't affect scripts without a shebang since these depend on the actual
commands they run, and since these are only read commands, they don't care
for that cached oom state flag.
it did affect scripts with shebang and no allow-oom flag, bug after the change in
this PR, scripts that are run with eval_ro would implicitly have that flag so again
the cached state doesn't matter.
p.s. this isn't a breaking change since all it does is allow scripts to run when they
should / could rather than blocking them.
Updated the comments for:
info command
lmpopCommand and blmpopCommand
sinterGenericCommand
Fix the missing "key" words in the srandmemberCommand function
For LPOS command, when rank is 0, prompt user that rank could be
positive number or negative number, and add a test for it
The purpose of the test is to kill the child while it is running.
From the last two lines we can see the child exits before being killed.
```
- Module fork started pid: 56998
* <fork> fork child started
- Killing running module fork child: 56998
* <fork> fork child exiting
signal-handler (1652267501) Received SIGUSR1 in child, exiting now.
```
In this commit, we pass an argument to `fork.create` indicating how
long it should sleep. For the fork kill test, we use a longer time to
avoid the child exiting before being killed.
Other changes:
use wait_for_condition instead of hardcoded `after 250`.
Unify the test for failing fork with the one for killing it (save time)
## Take one bulk string with spaces for MULTI_ARG configs parsing
Currently redis-server looks for arguments that start with `--`,
and anything in between them is considered arguments for the config.
like: `src/redis-server --shutdown-on-sigint nosave force now --port 6380`
MULTI_ARG configs behave differently for CONFIG command, vs the command
line argument for redis-server.
i.e. CONFIG command takes one bulk string with spaces in it, while the
command line takes an argv array with multiple values.
In this PR, in config.c, if `argc > 1` we can take them as is,
and if the config is a `MULTI_ARG` and `argc == 1`, we will split it by spaces.
So both of these will be the same:
```
redis-server --shutdown-on-sigint nosave force now --shutdown-on-sigterm nosave force
redis-server --shutdown-on-sigint nosave "force now" --shutdown-on-sigterm nosave force
redis-server --shutdown-on-sigint nosave "force now" --shutdown-on-sigterm "nosave force"
```
## Allow options value to use the `--` prefix
Currently it decides to switch to the next config, as soon as it sees `--`,
even if there was not a single value provided yet to the last config,
this makes it impossible to define a config value that has `--` prefix in it.
For instance, if we want to set the logfile to `--my--log--file`,
like `redis-server --logfile --my--log--file --loglevel verbose`,
current code will handle that incorrectly.
In this PR, now we allow a config value that has `--` prefix in it.
**But note that** something like `redis-server --some-config --config-value1 --config-value2 --loglevel debug`
would not work, because if you want to pass a value to a config starting with `--`, it can only be a single value.
like: `redis-server --some-config "--config-value1 --config-value2" --loglevel debug`
An example (using `--` prefix config value):
```
redis-server --logfile --my--log--file --loglevel verbose
redis-cli config get logfile loglevel
1) "loglevel"
2) "verbose"
3) "logfile"
4) "--my--log--file"
```
### Potentially breaking change
`redis-server --save --loglevel verbose` used to work the same as `redis-server --save "" --loglevel verbose`
now, it'll error!
## FLUSHALL
We used to restore the dirty counter after `rdbSave` zeroed it if we enable save.
Otherwise FLUSHALL will not be replicated nor put into the AOF.
And then we do increment it again below.
Without that extra dirty++, when db was already empty, FLUSHALL
will not be replicated nor put into the AOF.
We now gonna replace all that dirty counter magic with a call
to forceCommandPropagation (REPL and AOF), instead of all the
messing around with the dirty counter.
Added tests to cover three part (dirty counter, REPL, AOF).
One benefit other than cleaner code is that the `rdb_changes_since_last_save` is correct in this case.
## FLUSHDB
FLUSHDB was not replicated nor put into the AOF when db was already empty.
Unlike DEL on a non-existing key, FLUSHDB always does something, and that's to call the module hook.
So basically FLUSHDB is never a NOP, and thus it should always be propagated.
Not doing that, could mean that if a module does something in that hook, and wants to
avoid issues of that hook being missing on the replica if the db is empty, it'll need to do complicated things.
So now FLUSHDB add call forceCommandPropagation, we will always propagate FLUSHDB.
Always propagating FLUSHDB seems like a safe approach that shouldn't have any drawbacks (other than looking odd)
This was mentioned in #8972
## Test section:
We actually found it while solving a race condition in the BGSAVE test (other.tcl).
It was found in extra_ci Daily Arm64 (test-libc-malloc).
```
[exception]: Executing test client: ERR Background save already in progress.
ERR Background save already in progress
```
It look like `r flushdb` trigger (schedule) a bgsave right after `waitForBgsave r` and before `r save`.
Changing flushdb to flushall, FLUSHALL will do a foreground save and then set the dirty counter to 0.
Set `old_li` to NULL to avoid linking it again on error.
Before the fix, loading an already existing library will cause the existing library to be added again. This cause not harm other then wrong statistics. The statistics that are effected by the issue are:
* `libraries_count` and `functions_count` returned by `function stats` command
* `used_memory_functions` returned on `info memory` command
* `functions.caches` returned on `memory stats` command
Unintentional change in #9644 (since RC1) meant that an empty `--save ""` config
from command line, wouldn't have clear any setting from the config file
Added tests to cover that, and improved test infra to take additional
command line args for redis-server
If we want to support bits that can be overlapping, we need to make sure
that:
1. we don't use the same bit for two return values.
2. values should be sorted so that prefer ones (matching more
bits) come first.
When user uses the same input key for SDIFF as the first one, the result must be empty, so we don't need to process the elements to test.
This method is like the one done in zset‘s `zsetChooseDiffAlgorithm`
Co-authored-by: Oran Agra <oran@redislabs.com>
The white list is done by setting a metatable on the global table before initializing
any library. The metatable set the `__newindex` field to a function that check
the white list before adding the field to the table. Fields which is not on the
white list are simply ignored.
After initialization phase is done we protect the global table and each table
that might be reachable from the global table. For each table we also protect
the table metatable if exists.
Use the new `lua_enablereadonlytable` Lua API to protect the global tables of
both evals scripts and functions. For eval scripts, the implemetation is easy,
We simply call `lua_enablereadonlytable` on the global table to turn it into
a readonly table.
On functions its more complecated, we want to be able to switch globals between
load run and function run. To achieve this, we create a new empty table that
acts as the globals table for function, we control the actual globals using metatable
manipulation. Notice that even if the user gets a pointer to the original tables, all
the tables are set to be readonly (using `lua_enablereadonlytable` Lua API) so he can
not change them. The following inlustration better explain the solution:
```
Global table {} <- global table metatable {.__index = __real_globals__}
```
The `__real_globals__` is set depends on the run context (function load or function call).
Why this solution is needed and its not enough to simply switch globals?
When we run in the context of function load and create our functions, our function gets
the current globals that was set when they were created. Replacing the globals after
the creation will not effect them. This is why this trick it mandatory.
Enables registration of an enum config that'll let the user pass multiple keywords that
will be combined with `|` as flags into the integer config value.
```
const char *enum_vals[] = {"none", "one", "two", "three"};
const int int_vals[] = {0, 1, 2, 4};
if (RedisModule_RegisterEnumConfig(ctx, "flags", 3, REDISMODULE_CONFIG_DEFAULT | REDISMODULE_CONFIG_BITFLAGS, enum_vals, int_vals, 4, getFlagsConfigCommand, setFlagsConfigCommand, NULL, NULL) == REDISMODULE_ERR) {
return REDISMODULE_ERR;
}
```
doing:
`config set moduleconfigs.flags "two three"` will result in 6 being passed to`setFlagsConfigCommand`.
The SHUTDOWN command has various flags to change it's default behavior,
but in some cases establishing a connection to redis is complicated and it's easier
for the management software to use signals. however, so far the signals could only
trigger the default shutdown behavior.
Here we introduce the option to control shutdown arguments for SIGTERM and SIGINT.
New config options:
`shutdown-on-sigint [nosave | save] [now] [force]`
`shutdown-on-sigterm [nosave | save] [now] [force]`
Implementation:
Support MULTI_ARG_CONFIG on createEnumConfig to support multiple enums to be applied as bit flags.
Co-authored-by: Oran Agra <oran@redislabs.com>
Adds the `allow-cross-slot-keys` flag to Eval scripts and Functions to allow
scripts to access keys from multiple slots.
The default behavior is now that they are not allowed to do that (unlike before).
This is a breaking change for 7.0 release candidates (to be part of 7.0.0), but
not for previous redis releases since EVAL without shebang isn't doing this check.
Note that the check is done on both the keys declared by the EVAL / FCALL command
arguments, and also the ones used by the script when making a `redis.call`.
A note about the implementation, there seems to have been some confusion
about allowing access to non local keys. I thought I missed something in our
wider conversation, but Redis scripts do block access to non-local keys.
So the issue was just about cross slots being accessed.
1. Disk error and slave count checks didn't flag the transactions or counted correctly in command stats (regression from #10372 , 7.0 RC3)
2. RM_Call will reply the same way Redis does, in case of non-exisitng command or arity error
3. RM_WrongArtiy will consider the full command name
4. Use lowercase 'u' in "unknonw subcommand" (to align with "unknown command")
Followup work of #10127
This case is interesting because it originates from cron,
rather than from another command.
The idea came from looking at #9890 and #10573, and I was wondering if RM_Call
would work properly when `server.current_client == NULL`
* Fix timing issue in slowlog redact test
This test failed once in my daily CI (test-sanitizer-address (clang))
```
*** [err]: SLOWLOG - Some commands can redact sensitive fields in tests/unit/slowlog.tcl
Expected 'migrate 127.0.0.1 25649 key 9 5000 AUTH2 (redacted) (redacted)' to match '* key 9 5000 AUTH (redacted)' (context: type eval line 12 cmd {assert_match {* key 9 5000 AUTH (redacted)} [lindex [lindex [r slowlog get] 1] 3]} proc ::test)
```
The reason is that with slowlog-log-slower-than 10000,
slowlog get will have a chance to exceed 10ms.
Change slowlog-log-slower-than from 10000 to -1, disable it.
Also handles a same potentially problematic test above.
This is actually the same timing issue as #10432.
But also avoid repeated calls to `SLOWLOG GET`
Add a configuration option to attach an operating system-specific identifier to Redis sockets, supporting advanced network configurations using iptables (Linux) or ipfw (FreeBSD).
RM_Yield was missing a call to protectClient to prevent redis from
processing future commands of the yielding client.
Adding tests that fail without this fix.
This would be complicated to solve since nested calls to RM_Call used to
replace the current_client variable with the module temp client.
It looks like it's no longer necessary to do that, since it was added
back in #9890 to solve two issues, both already gone:
1. call to CONFIG SET maxmemory could trigger a module hook calling
RM_Call. although this specific issue is gone, arguably other hooks
like keyspace notification, can do the same.
2. an assertion in lookupKey that checks the current command of the
current client, introduced in #9572 and removed in #10248
since PUBLISH and SPUBLISH use different dictionaries for channels and clients,
and we already have an API for PUBLISH, it only makes sense to have one for SPUBLISH
Add test coverage and unifying some test infrastructure.
The tests verify that loading a binary payload to the Lua interpreter raises an error.
The Lua code modification was done here: fdf9d45509
which force the Lau interpreter to always use the text parser.
Add APIs to allow modules to compute the memory consumption of opaque objects owned by redis.
Without these, the mem_usage callbacks of module data types are useless in many cases.
Other changes:
Fix streamRadixTreeMemoryUsage to include the size of the rax structure itself
By the convention of errors, there is supposed to be a space between the code and the name.
While looking at some lua stuff I noticed that interpreter errors were not adding the space,
so some clients will try to map the detailed error message into the error.
We have tests that hit this condition, but they were just checking that the string "starts" with ERR.
I updated some other tests with similar incorrect string checking. This isn't complete though, as
there are other ways we check for ERR I didn't fix.
Produces some fun output like:
```
# Errorstats
errorstat_ERR:count=1
errorstat_ERRuser_script_1_:count=1
```
