Before #9497, before redis-server was shut down, we did not manually shut down all the clients,
which would have prevented valgrind from detecting a memory leak in the client's argc.
* On `kill_server` make sure we close the default `"client"` connection.
* Don't reconnect when trying to execute the client's `close` command.
* On `restart_server` make sure to remove the (closed) default `"client"` after killing the old server.
The main idea is how to allow a master to load replication info from RDB file when rebooting, if master can load replication info it means that replicas may have the chance to psync with master, it can save much traffic.
The key point is we need guarantee safety and consistency, so there
are two differences between master and replica:
1. master would load the replication info as secondary ID and
offset, in case other masters have the same replid.
2. when master loading RDB, it would propagate expired keys as DEL
command to replication backlog, then replica can receive these
commands to delete stale keys.
p.s. the expired keys when RDB loading is useful for users, so
we show it as `rdb_last_load_keys_expired` and `rdb_last_load_keys_loaded` in info persistence.
Moreover, after load replication info, master should update
`no_replica_time` in case loading RDB cost too long time.
Make bitpos/bitcount support bit index:
```
BITPOS key bit [start [end [BIT|BYTE]]]
BITCOUNT key [start end [BIT|BYTE]]
```
The default behavior is `BYTE`, so these commands are still compatible with old.
Part two of implementing #8702 (zset), after #8887.
## Description of the feature
Replaced all uses of ziplist with listpack in t_zset, and optimized some of the code to optimize performance.
## Rdb format changes
New `RDB_TYPE_ZSET_LISTPACK` rdb type.
## Rdb loading improvements:
1) Pre-expansion of dict for validation of duplicate data for listpack and ziplist.
2) Simplifying the release of empty key objects when RDB loading.
3) Unify ziplist and listpack data verify methods for zset and hash, and move code to rdb.c.
## Interface changes
1) New `zset-max-listpack-entries` config is an alias for `zset-max-ziplist-entries` (same with `zset-max-listpack-value`).
2) OBJECT ENCODING will return listpack instead of ziplist.
## Listpack improvements:
1) Add `lpDeleteRange` and `lpDeleteRangeWithEntry` functions to delete a range of entries from listpack.
2) Improve the performance of `lpCompare`, converting from string to integer is faster than converting from integer to string.
3) Replace `snprintf` with `ll2string` to improve performance in converting numbers to strings in `lpGet()`.
## Zset improvements:
1) Improve the performance of `zzlFind` method, use `lpFind` instead of `lpCompare` in a loop.
2) Use `lpDeleteRangeWithEntry` instead of `lpDelete` twice to delete a element of zset.
## Tests
1) Add some unittests for `lpDeleteRange` and `lpDeleteRangeWithEntry` function.
2) Add zset RDB loading test.
3) Add benchmark test for `lpCompare` and `ziplsitCompare`.
4) Add empty listpack zset corrupt dump test.
Throw an error when a user is provided multiple times on the command line instead of silently throwing one of them away.
Remove unneeded validation for validating users on ACL load.
A write request may be paused unexpectedly because `server.client_pause_end_time` is old.
**Recreate this:**
redis-cli -p 6379
127.0.0.1:6379> client pause 500000000 write
OK
127.0.0.1:6379> client unpause
OK
127.0.0.1:6379> client pause 10000 write
OK
127.0.0.1:6379> set key value
The write request `set key value` is paused util the timeout of 500000000 milliseconds was reached.
**Fix:**
reset `server.client_pause_end_time` = 0 in `unpauseClients`
For a lot of long strings which have same prefix which extends beyond
hashing limit, there will be many hash collisions which result in
performance degradation using commands like KEYS
We want to add COUNT option for BLPOP.
But we can't do it without breaking compatibility due to the command arguments syntax.
So this commit introduce two new commands.
Syntax for the new LMPOP command:
`LMPOP numkeys [<key> ...] LEFT|RIGHT [COUNT count]`
Syntax for the new BLMPOP command:
`BLMPOP timeout numkeys [<key> ...] LEFT|RIGHT [COUNT count]`
Some background:
- LPOP takes one key, and can return multiple elements.
- BLPOP takes multiple keys, but returns one element from just one key.
- LMPOP can take multiple keys and return multiple elements from just one key.
Note that LMPOP/BLMPOP can take multiple keys, it eventually operates on just one key.
And it will propagate as LPOP or RPOP with the COUNT option.
As a new command, it still return NIL if we can't pop any elements.
For the normal response is nested arrays in RESP2 and RESP3, like:
```
LMPOP/BLMPOP
1) keyname
2) 1) element1
2) element2
```
I.e. unlike BLPOP that returns a key name and one element so it uses a flat array,
and LPOP that returns multiple elements with no key name, and again uses a flat array,
this one has to return a nested array, and it does for for both RESP2 and RESP3 (like SCAN does)
Some discuss can see: #766#8824
Add two INFO metrics:
```
total_active_defrag_time:12345
current_active_defrag_time:456
```
`current_active_defrag_time` if greater than 0, means how much time has
passed since active defrag started running. If active defrag stops, this metric is reset to 0.
`total_active_defrag_time` means total time the fragmentation
was over the defrag threshold since the server started.
This is a followup PR for #9031
* Delay to discard cache master when full synchronization
* Don't disconnect with replicas before loading transferred RDB when full sync
Previously, once replica need to start full synchronization with master,
it will discard cached master whatever full synchronization is failed or
not.
Now we discard cached master only when transferring RDB is finished
and start to change data space, this make replica could start partial
resynchronization with another new master if new master is failed
during full synchronization.
When parsing an array type reply, ctx will be lost when recursively parsing its
elements, which will cause a memory leak in automemory mode.
This is a result of the changes in #9202
Add test for callReplyParseCollection fix
When a replica paused, it would not apply any commands event the command comes from master, if we feed the non-applied command to replication stream, the replication offset would be wrong, and data would be lost after failover(since replica's `master_repl_offset` grows but command is not applied).
To fix it, here are the changes:
* Don't update replica's replication offset or propagate commands to sub-replicas when it's paused in `commandProcessed`.
* Show `slave_read_repl_offset` in info reply.
* Add an assert to make sure master client should never be blocked unless pause or module (some modules may use block way to do background (parallel) processing and forward original block module command to the replica, it's not a good way but it can work, so the assert excludes module now, but someday in future all modules should rewrite block command to propagate like what `BLPOP` does).
Until now, giving a negative index seeks from the end of a list and a
positive seeks from the beginning. This change makes it seek from
the nearest end, regardless of the sign of the given index.
quicklistIndex is used by all list commands which operate by index.
LINDEX key 999999 in a list if 1M elements is greately optimized by
this change. Latency is cut by 75%.
LINDEX key -1000000 in a list of 1M elements, likewise.
LRANGE key -1 -1 is affected by this, since LRANGE converts the
indices to positive numbers before seeking.
The tests for corrupt dumps are updated to make sure the corrup
data is seeked in the same direction as before.
1. MIGRATE has a potnetial key arg in argv[3]. It should be reflected in the command table.
2. getKeysUsingCommandTable should never free getKeysResult, it is always freed by the caller)
The reason we never encountered this double-free bug is that almost always getKeysResult
uses the statis buffer and doesn't allocate a new one.
Normally we execute the read event first and then the write event.
When the barrier is set, we will do it reverse.
However, under `kqueue`, if an `fd` has both read and write events,
reading the event using `kevent` will generate two events, which will
result in uncontrolled read and write timing.
This also means that the guarantees of AOF `appendfsync` = `always` are
not met on MacOS without this fix.
The main change to this pr is to cache the events already obtained when reading
them, so that if the same `fd` occurs again, only the mask in the cache is updated,
rather than a new event is generated.
This was exposed by the following test failure on MacOS:
```
*** [err]: AOF fsync always barrier issue in tests/integration/aof.tcl
Expected 544 != 544 (context: type eval line 26 cmd {assert {$size1 != $size2}} proc ::test)
```
This is considered a safer approach as it prevents a race condition that
could lead to chmod executed on a different file.
Not a major risk, but CodeQL alerted this so it makes sense to fix.
* Enhance dict to support arbitrary metadata carried in dictEntry
Co-authored-by: Viktor Söderqvist <viktor.soderqvist@est.tech>
* Rewrite slot-to-keys mapping to linked lists using dict entry metadata
This is a memory enhancement for Redis Cluster.
The radix tree slots_to_keys (which duplicates all key names prefixed with their
slot number) is replaced with a linked list for each slot. The dict entries of
the same cluster slot form a linked list and the pointers are stored as metadata
in each dict entry of the main DB dict.
This commit also moves the slot-to-key API from db.c to cluster.c.
Co-authored-by: Jim Brunner <brunnerj@amazon.com>
We implement incremental data sync in rio.c by call fsync, on slow disk, that may cost a lot of time,
sync_file_range could provide async fsync, so we could serialize key/value and sync file data at the same time.
> one tip for sync_file_range usage: http://lkml.iu.edu/hypermail/linux/kernel/1005.2/01845.html
Additionally, this change avoids a single large write to be used, which can result in a mass of dirty
pages in the kernel (increasing the risk of someone else's write to block).
On HDD, current solution could reduce approximate half of dumping RDB time,
this PR costs 50s for dump 7.7G rdb but unstable branch costs 93s.
On NVME SSD, this PR can't reduce much time, this PR costs 40s, unstable branch costs 48s.
Moreover, I find calling data sync every 4MB is better than 32MB.
This one follow #9313 and goes deeper (validation of config file parsing)
Move the check/update logic to a new updateClientOutputBufferLimit
function. So that it can be used in CONFIG SET and config file parsing.
1. The output of --help:
* On the Usage line, just write [OPTIONS] [COMMAND ARGS...] instead listing
only a few arbitrary options and no command.
* For --cluster, describe that if the command is supplied on the command line,
the key must contain "{tag}". Otherwise, the command will not be sent to the
right cluster node.
* For -r, add a note that if -r is omitted, all commands in a benchmark will
use the same key. Also align the description.
* For -t, describe that -t is ignored if a command is supplied on the command
line.
2. Print a warning if -t is present when a specific command is supplied.
3. Print all warnings and errors to stderr.
4. Remove -e from calls in redis-benchmark test suite.
In multipe threads mode, every thread output throughput info. This
may cause some problems:
- Bug in https://github.com/redis/redis/pull/8615;
- The show throughput is called too frequently;
- showThroughput which updates shared variable lacks synchronization
mechanism.
This commit also reverts changes in #8615 and changes time event
interval to macro.
When `decr_step` is greater than `oldlimit`, the final `bestlimit` may be invalid.
For example, oldlimit = 10, decr_step = 16.
Current bestlimit = 15 and setrlimit() failed. Since bestlimit is less than decr_step , then exit the loop.
The final bestlimit is larger than oldlimit but is invalid.
Note that this only matters if the system fd limit is below 16, so unlikely to have any actual effect.
This aims to solve the issue in CONFIG SET maxmemory can only set maxmemory to up
to 9223372036854775807 (2^63) while the maxmemory should be ULLONG.
Added a memtoull function to convert a string representing an amount of memory
into the number of bytes (similar to memtoll but for ull). Also added ull2string to
convert a ULLong to string (Similar to ll2string).
In old way, we always increase server.dirty in BITSET and BITFIELD SET.
Even the command doesn't really change anything. This commit make
sure BITSET and BITFIELD SET only increase dirty when the value changed.
Because of that, if the value not changed, some others implications:
- Avoid adding useless AOF
- Reduce replication traffic
- Will not trigger keyspace notifications (setbit)
- Will not invalidate WATCH
- Will not sent the invalidation message to the tracking client
We only run OOM related tests on x86_64 and aarch64, as jemalloc on other
platforms (notably s390x) may actually succeed very large allocations. As
a result the test may hang for a very long time at the cleanup phase,
iterating as many as 2^61 hash table slots.
If we want to check `defined(SYNC_FILE_RANGE_WAIT_BEFORE)`, we should include fcntl.h.
otherwise, SYNC_FILE_RANGE_WAIT_BEFORE is not defined, and there is alway not `sync_file_range` system call.
Introduced by #8532
The order of setting things up follows some reasoning: Setup signal
handlers first because a signal could fire at any time. Adjust OOM score
before everything else to assist the OOM killer if memory resources are
low.
The trigger for this is a valgrind test failure which resulted with the
child catching a SIGUSR1 before initializing the handler.
Making sure Redis builds properly on older compiler is important given the wide range of systems it is built for. So far Ubuntu 16.04 has been used for this purpose, but as it's getting phased out we'll move to `oldoldstable` Debian as an "old system" precursor.
