Save parameters should either be default or whatever specified in the
config file. This fixes an issue introduced in #7092 which causes
configuration file settings to be applied on top of the defaults.
During long running scripts or loading RDB/AOF, we may need to do some
defragging. Since processEventsWhileBlocked is called periodically at
unknown intervals, and many cron jobs either depend on run_with_period
(including active defrag), or rely on being called at server.hz rate
(i.e. active defrag knows ho much time to run by looking at server.hz),
the whileBlockedCron may have to run a loop triggering the cron jobs in it
(currently only active defrag) several times.
Other changes:
- Adding a test for defrag during aof loading.
- Changing key-load-delay config to take negative values for fractions
of a microsecond sleep
Avoid re-configuring (and validating) SSL/TLS configuration on `CONFIG
SET` when TLS is not actively enabled for incoming connections, cluster
bus or replication.
This fixes failures when tests run without `--tls` on binaries that were
built with TLS support.
An additional benefit is that it's now possible to perform a multi-step
configuration process while TLS is disabled. The new configuration will
be verified and applied only when TLS is effectively enabled.
Add Linux kernel OOM killer control option.
This adds the ability to control the Linux OOM killer oom_score_adj
parameter for all Redis processes, depending on the process role (i.e.
master, replica, background child).
A oom-score-adj global boolean flag control this feature. In addition,
specific values can be configured using oom-score-adj-values if
additional tuning is required.
This makes it possible to add tests that generate assertions, and run
them with valgrind, making sure that there are no memory violations
prior to the assertion.
New config options:
- crash-log-enabled - can be disabled for cleaner core dumps
- crash-memcheck-enabled - useful for faster termination after a crash
- use-exit-on-panic - to be used by the test suite so that valgrind can
detect leaks and memory corruptions
Other changes:
- Crash log is printed even on system that dont HAVE_BACKTRACE, i.e. in
both SIGSEGV and assert / panic
- Assertion and panic won't print registers and code around EIP (which
was useless), but will do fast memory test (which may still indicate
that the assertion was due to memory corrpution)
I had to reshuffle code in order to re-use it, so i extracted come code
into function without actually doing any changes to the code:
- logServerInfo
- logModulesInfo
- doFastMemoryTest (with the exception of it being conditional)
- dumpCodeAroundEIP
changes to the crash report on segfault:
- logRegisters is called right after the stack trace (before info) done
just in order to have more re-usable code
- stack trace skips the first two items on the stack (the crash log and
signal handler functions)
Initialize and configure OpenSSL even when tls-port is not used, because
we may still have tls-cluster or tls-replication.
Also, make sure to reconfigure OpenSSL when these parameters are changed
as TLS could have been enabled for the first time.
Currently, there are several types of threads/child processes of a
redis server. Sometimes we need deeply optimise the performance of
redis, so we would like to isolate threads/processes.
There were some discussion about cpu affinity cases in the issue:
https://github.com/antirez/redis/issues/2863
So implement cpu affinity setting by redis.conf in this patch, then
we can config server_cpulist/bio_cpulist/aof_rewrite_cpulist/
bgsave_cpulist by cpu list.
Examples of cpulist in redis.conf:
server_cpulist 0-7:2 means cpu affinity 0,2,4,6
bio_cpulist 1,3 means cpu affinity 1,3
aof_rewrite_cpulist 8-11 means cpu affinity 8,9,10,11
bgsave_cpulist 1,10-11 means cpu affinity 1,10,11
Test on linux/freebsd, both work fine.
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
This makes simpler to give people help when posting such kind of errors
in the mailing list or other help forums, because sometimes the
directive looks well spelled, but the version of Redis they are using is
not able to support it.
the warning condition was if usage > limit (saying it'll cause eviction
or oom), but in fact the eviction and oom depends on used minus slave
buffers.
other than fixing the condition, i add info about the current usage and
limit, which may be useful when looking at the log.
We noticed that the error replies for the generic mechanism for enums
are very verbose for config file parsing, but not for config set
command.
instead of replicating this code, i did a small refactoring to share
code between CONFIG SET and config file parsing.
and also renamed the enum group functions to be consistent with the
naming of other types.
Funcion adjustOpenFilesLimit() has an implicit parameter, which is server.maxclients.
This function aims to ajust maximum file descriptor number according to server.maxclients
by best effort, which is "bestlimit" could be lower than "maxfiles" but greater than "oldlimit".
When we try to increase "maxclients" using CONFIG SET command, we could increase maximum
file descriptor number to a bigger value without calling aeResizeSetSize the same time.
When later more and more clients connect to server, the allocated fd could be bigger and bigger,
and eventually exceeds events size of aeEventLoop.events. When new nodes joins the cluster,
new link is created, together with new fd, but when calling aeCreateFileEvent, we did not
check the return value. In this case, we have a non-null "link" but the associated fd is not
registered.
So when we dynamically set "maxclients" we could reach an inconsistency between maximum file
descriptor number of the process and server.maxclients. And later could cause cluster link and link
fd inconsistency.
While setting "maxclients" dynamically, we consider it as failed when resulting "maxclients" is not
the same as expected. We try to restore back the maximum file descriptor number when we failed to set
"maxclients" to the specified value, so that server.maxclients could act as a guard as before.
- make lua-replicate-commands mutable (it never was, but i don't see why)
- make tcp-backlog immutable (fix a recent refactory mistake)
- increase the max limit of a few configs to match what they were before
the recent refactory
Changes in behavior:
- Change server.stream_node_max_entries from int64_t to long long, so that it can be used by the generic infra
- standard error reply instead of "repl-backlog-size must be 1 or greater" and such
- tls-port and a few TLS booleans were readable (config get) even when USE_OPENSSL was off (now they aren't)
- syslog-enabled, syslog-ident, cluster-enabled, appendfilename, and supervised didn't have a get (now they do)
- pidfile was initialized to NULL in InitServerConfig but had CONFIG_DEFAULT_PID_FILE in rewriteConfig (so the real default was "", but rewrite would cause it to be set), fixed the rewrite.
- TLS config in server.h was uninitialized (if no tls config args were provided)
Adding test for sanity and coverage
- Adding is_valid_fn and update_fn, both return 1 for success and 0 for failure with an optional error message.
- Bugfix in handling boundary check of unsigned numeric types (was boundaries as signed)
- Adding more numeric types to generic mechanism: uint, ulonglong, long, time_t, off_t
- More verbose error replies ("argument must be between" in out of range CONFIG SET (like config file parsing)
- add capability for each config to have a callback to check if value is valid and return error string
will enable converting many of the remaining custom configs into generic ones (reducing the x4 repetition for set,get,config,rewrite)
- add capability for each config to to run some update code after config is changed (only for CONFIG SET)
will also enable converting many of the remaining custom configs into generic ones
- add capability to move default values from server.h and server.c to config.c
will reduce many excess lines in server.h and server.c (plus, no need to rebuild the entire code base when a default change 8-))
other behavior changes:
- fix bug in bool config get (always returning 'yes')
- fix a bug in modifying jemalloc-bg-thread at runtime (didn't call set_jemalloc_bg_thread, due to bad merge conflict resolution (my fault))
- side effect when a failed attempt to enable activedefrag at runtime, we now respond with -ERR and not with -DISABLED
This adds support for explicit configuration of a CA certs directory (in
addition to the previously supported bundle file). For redis-cli, if no
explicit CA configuration is supplied the system-wide default
configuration will be adopted.
