This feature is useful, especially in deployments using Sentinel in
order to setup Redis HA, where the slave is executed with NAT or port
forwarding, so that the auto-detected port/ip addresses, as listed in
the "INFO replication" output of the master, or as provided by the
"ROLE" command, don't match the real addresses at which the slave is
reachable for connections.
In a previous commit the replication code was changed in order to
centralize the BGSAVE for replication trigger in replicationCron(),
however after further testings, the 1 second delay imposed by this
change is not acceptable.
So now the BGSAVE is only delayed if the AOF rewriting process is
active. However past comments made sure that replicationCron() is always
able to trigger the BGSAVE when needed, making the code generally more
robust.
The new code is more similar to the initial @oranagra patch where the
BGSAVE was delayed only if an AOF rewrite was in progress.
Trivia: delaying the BGSAVE uncovered a minor Sentinel issue that is now
fixed.
This makes the replication code conceptually simpler by removing the
synchronous BGSAVE trigger in syncCommand(). This also means that
socket and disk BGSAVE targets are handled by the same code.
Now we have a single function to call in any state of the slave
handshake, instead of using different functions for different states
which is error prone. Change performed in the context of issue #2479 but
does not fix it, since should be functionally identical to the past.
Just an attempt to make replication.c simpler to follow.
Before this commit, after triggering a BGSAVE it was up to the caller of
startBgsavForReplication() to handle slaves in WAIT_BGSAVE_START in
order to update them accordingly. However when the replication target is
the socket, this is not possible since the process of updating the
slaves and sending the FULLRESYNC reply must be coupled with the process
of starting an RDB save (the reason is, we need to send the FULLSYNC
command and spawn a child that will start to send RDB data to the slaves
ASAP).
This commit moves the responsibility of handling slaves in
WAIT_BGSAVE_START to startBgsavForReplication() so that for both
diskless and disk-based replication we have the same chain of
responsiblity. In order accomodate such change, the syncCommand() also
needs to put the client in the slave list ASAP (just after the initial
checks) and not at the end, so that startBgsavForReplication() can find
the new slave alrady in the list.
Another related change is what happens if the BGSAVE fails because of
fork() or other errors: we now remove the slave from the list of slaves
and send an error, scheduling the slave connection to be terminated.
As a side effect of this change the following errors found by
Oran Agra are fixed (thanks!):
1. rdbSaveToSlavesSockets() on failed fork will get the slaves cleaned
up, otherwise they remain in a wrong state forever since we setup them
for full resync before actually trying to fork.
2. updateSlavesWaitingBgsave() with replication target set as "socket"
was broken since the function changed the slaves state from
WAIT_BGSAVE_START to WAIT_BGSAVE_END via
replicationSetupSlaveForFullResync(), so later rdbSaveToSlavesSockets()
will not find any slave in the right state (WAIT_BGSAVE_START) to feed.
It is simpler if removing the read event handler from the FD is up to
slaveTryPartialResynchronization, after all it is only called in the
context of syncWithMaster.
This commit also makes sure that on error all the event handlers are
removed from the socket before closing it.
Add the concept of slaves capabilities to Redis, the slave now presents
to the Redis master with a set of capabilities in the form:
REPLCONF capa SOMECAPA capa OTHERCAPA ...
This has the effect of setting slave->slave_capa with the corresponding
SLAVE_CAPA macros that the master can test later to understand if it
the slave will understand certain formats and protocols of the
replication process. This makes it much simpler to introduce new
replication capabilities in the future in a way that don't break old
slaves or masters.
This patch was designed and implemented together with Oran Agra
(@oranagra).
For PINGs we use the period configured by the user, but for the newlines
of slaves waiting for an RDB to be created (including slaves waiting for
the FULLRESYNC reply) we need to ping with frequency of 1 second, since
the timeout is fixed and needs to be refreshed.
In previous commits we moved the FULLRESYNC to the moment we start the
BGSAVE, so that the offset we provide is the right one. However this
also means that we need to re-emit the SELECT statement every time a new
slave starts to accumulate the changes.
To obtian this effect in a more clean way, the function that sends the
FULLRESYNC reply was overloaded with a more important role of also doing
this and chanigng the slave state. So it was renamed to
replicationSetupSlaveForFullResync() to better reflect what it does now.
This commit attempts to fix a bug involving PSYNC and diskless
replication (currently experimental) found by Yuval Inbar from Redis Labs
and that was later found to have even more far reaching effects (the bug also
exists when diskstore is off).
The gist of the bug is that, a Redis master replies with +FULLRESYNC to
a PSYNC attempt that fails and requires a full resynchronization.
However, the baseline offset sent along with FULLRESYNC was always the
current master replication offset. This is not ok, because there are
many reasosn that may delay the RDB file creation. And... guess what,
the master offset we communicate must be the one of the time the RDB
was created. So for example:
1) When the BGSAVE for replication is delayed since there is one
already but is not good for replication.
2) When the BGSAVE is not needed as we attach one currently ongoing.
3) When because of diskless replication the BGSAVE is delayed.
In all the above cases the PSYNC reply is wrong and the slave may
reconnect later claiming to need a wrong offset: this may cause
data curruption later.
Using chained replication where C is slave of B which is in turn slave of
A, if B reconnects the replication link with A but discovers it is no
longer possible to PSYNC, slaves of B must be disconnected and PSYNC
not allowed, since the new B dataset may be completely different after
the synchronization with the master.
Note that there are varius semantical differences in the way this is
handled now compared to the past. In the past the semantics was:
1. When a slave lost connection with its master, disconnected the chained
slaves ASAP. Which is not needed since after a successful PSYNC with the
master, the slaves can continue and don't need to resync in turn.
2. However after a failed PSYNC the replication backlog was not reset, so a
slave was able to PSYNC successfully even if the instance did a full
sync with its master, containing now an entirely different data set.
Now instead chained slaves are not disconnected when the slave lose the
connection with its master, but only when it is forced to full SYNC with
its master. This means that if the slave having chained slaves does a
successful PSYNC all its slaves can continue without troubles.
See issue #2694 for more details.
We usually want to reach the master using the address of the interface
Redis is bound to (via the "bind" config option). That's useful since
the master will get (and publish) the slave address getting the peer
name of the incoming socket connection from the slave.
However, when this is not possible, for example because the slave is
bound to the loopback interface but repliaces from a master accessed via
an external interface, we want to still connect with the master even
from a different interface: in this case it is not really important that
the master will provide any other address, while it is vital to be able
to replicate correctly.
Related to issues #2609 and #2612.
When we fail to setup the write handler it does not make sense to take
the client around, it is missing writes: whatever is a client or a slave
anyway the connection should terminated ASAP.
Moreover what the function does exactly with its return value, and in
which case the write handler is installed on the socket, was not clear,
so the functions comment are improved to make the goals of the function
more obvious.
Also related to #2485.
master was closing the connection if the RDB transfer took long time.
and also sent PINGs to the slave before it got the initial ACK, in which case the slave wouldn't be able to find the EOF marker.
Bug as old as Redis and blocking operations. It's hard to trigger since
only happens on instance role switch, but the results are quite bad
since an inconsistency between master and slave is created.
How to trigger the bug is a good description of the bug itself.
1. Client does "BLPOP mylist 0" in master.
2. Master is turned into slave, that replicates from New-Master.
3. Client does "LPUSH mylist foo" in New-Master.
4. New-Master propagates write to slave.
5. Slave receives the LPUSH, the blocked client get served.
Now Master "mylist" key has "foo", Slave "mylist" key is empty.
Highlights:
* At step "2" above, the client remains attached, basically escaping any
check performed during command dispatch: read only slave, in that case.
* At step "5" the slave (that was the master), serves the blocked client
consuming a list element, which is not consumed on the master side.
This scenario is technically likely to happen during failovers, however
since Redis Sentinel already disconnects clients using the CLIENT
command when changing the role of the instance, the bug is avoided in
Sentinel deployments.
Closes#2473.
Track bandwidth used by clients and replication (but diskless
replication is not tracked since the actual transfer happens in the
child process).
This includes a refactoring that makes tracking new instantaneous
metrics simpler.
RDB EOF detection was relying on the final part of the RDB transfer to
be a magic 40 bytes EOF marker. However as the slave is put online
immediately, and because of sockets timeouts, the replication stream is
actually contiguous with the RDB file.
This means that to detect the EOF correctly we should either:
1) Scan all the stream searching for the mark. Sucks CPU-wise.
2) Start to send the replication stream only after an acknowledge.
3) Implement a proper chunked encoding.
For now solution "2" was picked, so the master does not start to send
ASAP the stream of commands in the case of diskless replication. We wait
for the first REPLCONF ACK command from the slave, that certifies us
that the slave correctly loaded the RDB file and is ready to get more
data.
Same as the original bind fixes (we just missed these the
first time around).
This helps Redis not automatically send
connections from the first IP on an interface if we are bound
to a specific IP address (e.g. with multiple IP aliases on one
interface, you want to send from _your_ IP, not from the first IP
on the interface).
This caused BGSAVE to be triggered a second time without any need when
we switch from socket to disk target via the command
CONFIG SET repl-diskless-sync no
and there is already a slave waiting for the BGSAVE to start.
Also comments clarified about what is happening.
