The corrupt dump fuzzer uncovered a valgrind warning saying:
```
==76370== Argument 'size' of function malloc has a fishy (possibly negative) value: -3744781444216323815
```
This allocation would have failed (returning NULL) and being handled properly by redis (even before this change), but we also want to silence the valgrind warnings (which are checking that casting to ssize_t produces a non-negative value).
The solution i opted for is to explicitly fail these allocations (returning NULL), before even reaching `malloc` (which would have failed and return NULL too).
The implication is that we will not be able to support a single allocation of more than 2GB on a 32bit system (which i don't think is a realistic scenario).
i.e. i do think we could be facing cases were redis consumes more than 2gb on a 32bit system, but not in a single allocation.
The byproduct of this, is that i dropped the overflow assertions, since these will now lead to the same OOM panic we have for failed allocations.
The new test added in #10891 can fail with a different error.
see comment in networking.c saying
```c
/* That's a best effort error message, don't check write errors.
* Note that for TLS connections, no handshake was done yet so nothing
* is written and the connection will just drop. */
```
my maxclients config:
```
redis-cli config get maxclients
1) "maxclients"
2) "4064"
```
Before this bug was fixed, creating 4065 clients appeared to be successful, but only 4064 were actually created```
```
./redis-benchmark -c 4065 -I
Creating 4065 idle connections and waiting forever (Ctrl+C when done)
cients: 4065
```
now :
```
./redis-benchmark -c 4065 -I
Creating 4065 idle connections and waiting forever (Ctrl+C when done)
Error from server: ERR max number of clients reached
./redis-benchmark -c 4064 -I
Creating 4064 idle connections and waiting forever (Ctrl+C when done)
clients: 4064
```
The test calls `ldd` on `redis-server` in order to find out whether the binary
was linked against `libmusl`; However, `ldd` returns a value different from `0`
when statically linking the binaries agains libc-musl, because `redis-server` is
not a dynamic executable (as given by the exception thrown by the failing test),
and `make test` terminates with an error::
$ ldd src/redis-server
not a dynamic executable
$ echo $?
1
This commit fixes the test by ignoring such failures.
Co-authored-by: Yossi Gottlieb <yossigo@gmail.com>
This change fixes failing `integration/logging.tcl` test in Gentoo with
musl libc, where `ldd` returns
```
libc.so => /lib/ld-musl-x86_64.so.1 (0x7f9d5f171000)
```
unlike Alpine's
```
libc.musl-x86_64.so.1 => /lib/ld-musl-x86_64.so.1 (0x7f82cfa16000)
```
The solution is to extend matching pattern introduced in #8532.
* Fix broken protocol when redis can't persist to RDB (general commands, not
modules), excessive newline. regression of #10372 (7.0 RC3)
* Fix broken protocol when Redis can't persist to AOF (modules and
scripts), missing newline.
* Fix bug in OOM check of EVAL scripts called from RM_Call.
set the cached OOM state for scripts before executing module commands too,
so that it can serve scripts that are executed by modules.
i.e. in the past EVAL executed by RM_Call could have either falsely
fail or falsely succeeded because of a wrong cached OOM state flag.
* Fix bugs with RM_Yield:
1. SHUTDOWN should only accept the NOSAVE mode
2. Avoid eviction during yield command processing.
3. Avoid processing master client commands while yielding from another client
* Add new two more checks to RM_Call script mode.
1. READONLY You can't write against a read only replica
2. MASTERDOWN Link with MASTER is down and `replica-serve-stale-data` is set to `no`
* Add new RM_Call flag to let redis automatically refuse `deny-oom` commands
while over the memory limit.
* Add tests to cover various errors from Scripts, Modules, Modules
calling scripts, and Modules calling commands in script mode.
Add tests:
* Looks like the MISCONF error was completely uncovered by the tests,
add tests for it, including from scripts, and modules
* Add tests for NOREPLICAS from scripts
* Add tests for the various errors in module RM_Call, including RM_Call that
calls EVAL, and RM_call in "eval mode". that includes:
NOREPLICAS, READONLY, MASTERDOWN, MISCONF
## FLUSHALL
We used to restore the dirty counter after `rdbSave` zeroed it if we enable save.
Otherwise FLUSHALL will not be replicated nor put into the AOF.
And then we do increment it again below.
Without that extra dirty++, when db was already empty, FLUSHALL
will not be replicated nor put into the AOF.
We now gonna replace all that dirty counter magic with a call
to forceCommandPropagation (REPL and AOF), instead of all the
messing around with the dirty counter.
Added tests to cover three part (dirty counter, REPL, AOF).
One benefit other than cleaner code is that the `rdb_changes_since_last_save` is correct in this case.
## FLUSHDB
FLUSHDB was not replicated nor put into the AOF when db was already empty.
Unlike DEL on a non-existing key, FLUSHDB always does something, and that's to call the module hook.
So basically FLUSHDB is never a NOP, and thus it should always be propagated.
Not doing that, could mean that if a module does something in that hook, and wants to
avoid issues of that hook being missing on the replica if the db is empty, it'll need to do complicated things.
So now FLUSHDB add call forceCommandPropagation, we will always propagate FLUSHDB.
Always propagating FLUSHDB seems like a safe approach that shouldn't have any drawbacks (other than looking odd)
This was mentioned in #8972
## Test section:
We actually found it while solving a race condition in the BGSAVE test (other.tcl).
It was found in extra_ci Daily Arm64 (test-libc-malloc).
```
[exception]: Executing test client: ERR Background save already in progress.
ERR Background save already in progress
```
It look like `r flushdb` trigger (schedule) a bgsave right after `waitForBgsave r` and before `r save`.
Changing flushdb to flushall, FLUSHALL will do a foreground save and then set the dirty counter to 0.
Changes:
- When AOF is enabled **after** startup, the data accumulated during `AOF_WAIT_REWRITE`
will only be stored in a temp INCR AOF file. Only after the first AOFRW is successful, we will
add it to manifest file.
Before this fix, the manifest referred to the temp file which could cause a restart during that
time to load it without it's base.
- Add `aof_rewrites_consecutive_failures` info field for aofrw limiting implementation.
Now we can guarantee that these behaviors of MP-AOF are the same as before (past redis releases):
- When AOF is enabled after startup, the data accumulated during `AOF_WAIT_REWRITE` will only
be stored in a visible place. Only after the first AOFRW is successful, we will add it to manifest file.
- When disable AOF, we did not delete the AOF file in the past so there's no need to change that
behavior now (yet).
- When toggling AOF off and then on (could be as part of a full-sync), a crash or restart before the
first rewrite is completed, would result with the previous version being loaded (might not be right thing,
but that's what we always had).
* Till now, replicas that were unable to persist, would still execute the commands
they got from the master, now they'll panic by default, and we add a new
`replica-ignore-disk-errors` config to change that.
* Till now, when a command failed on a replica or AOF-loading, it only logged a
warning and a stat, we add a new `propagation-error-behavior` config to allow
panicking in that state (may become the default one day)
Note that commands that fail on the replica can either indicate a bug that could
cause data inconsistency between the replica and the master, or they could be
in some cases (specifically in previous versions), a result of a command (e.g. EVAL)
that failed on the master, but still had to be propagated to fail on the replica as well.
## Move library meta data to be part of the library payload.
Following the discussion on https://github.com/redis/redis/issues/10429 and the intention to add (in the future) library versioning support, we believe that the entire library metadata (like name and engine) should be part of the library payload and not provided by the `FUNCTION LOAD` command. The reasoning behind this is that the programmer who developed the library should be the one who set those values (name, engine, and in the future also version). **It is not the responsibility of the admin who load the library into the database.**
The PR moves all the library metadata (engine and function name) to be part of the library payload. The metadata needs to be provided on the first line of the payload using the shebang format (`#!<engine> name=<name>`), example:
```lua
#!lua name=test
redis.register_function('foo', function() return 1 end)
```
The above script will run on the Lua engine and will create a library called `test`.
## API Changes (compare to 7.0 rc2)
* `FUNCTION LOAD` command was change and now it simply gets the library payload and extract the engine and name from the payload. In addition, the command will now return the function name which can later be used on `FUNCTION DELETE` and `FUNCTION LIST`.
* The description field was completely removed from`FUNCTION LOAD`, and `FUNCTION LIST`
## Breaking Changes (compare to 7.0 rc2)
* Library description was removed (we can re-add it in the future either as part of the shebang line or an additional line).
* Loading an AOF file that was generated by either 7.0 rc1 or 7.0 rc2 will fail because the old command syntax is invalid.
## Notes
* Loading an RDB file that was generated by rc1 / rc2 **is** supported, Redis will automatically add the shebang to the libraries payloads (we can probably delete that code after 7.0.3 or so since there's no need to keep supporting upgrades from an RC build).
Normally, `redis-cli` escapes non-printable data received from Redis, using a custom scheme (which is also used to handle quoted input). When using `--json` this is not desired as it is not compatible with RFC 7159, which specifies JSON strings are assumed to be Unicode and how they should be escaped.
This commit changes `--json` to follow RFC 7159, which means that properly encoded Unicode strings in Redis will result with a valid Unicode JSON.
However, this introduces a new problem with `--json` and data that is not valid Unicode (e.g., random binary data, text that follows other encoding, etc.). To address this, we add `--quoted-json` which produces JSON strings that follow the original redis-cli quoting scheme.
For example, a value that consists of only null (0x00) bytes will show up as:
* `"\u0000\u0000\u0000"` when using `--json`
* `"\\x00\\x00\\x00"` when using `--quoted-json`
Adds the ability to track the lag of a consumer group (CG), that is, the number
of entries yet-to-be-delivered from the stream.
The proposed constant-time solution is in the spirit of "best-effort."
Partially addresses #8737.
## Description of approach
We add a new "entries_added" property to the stream. This starts at 0 for a new
stream and is incremented by 1 with every `XADD`. It is essentially an all-time
counter of the entries added to the stream.
Given the stream's length and this counter value, we can trivially find the logical
"entries_added" counter of the first ID if and only if the stream is contiguous.
A fragmented stream contains one or more tombstones generated by `XDEL`s.
The new "xdel_max_id" stream property tracks the latest tombstone.
The CG also tracks its last delivered ID's as an "entries_read" counter and
increments it independently when delivering new messages, unless the this
read counter is invalid (-1 means invalid offset). When the CG's counter is
available, the reported lag is the difference between added and read counters.
Lastly, this also adds a "first_id" field to the stream structure in order to make
looking it up cheaper in most cases.
## Limitations
There are two cases in which the mechanism isn't able to track the lag.
In these cases, `XINFO` replies with `null` in the "lag" field.
The first case is when a CG is created with an arbitrary last delivered ID,
that isn't "0-0", nor the first or the last entries of the stream. In this case,
it is impossible to obtain a valid read counter (short of an O(N) operation).
The second case is when there are one or more tombstones fragmenting
the stream's entries range.
In both cases, given enough time and assuming that the consumers are
active (reading and lacking) and advancing, the CG should be able to
catch up with the tip of the stream and report zero lag.
Once that's achieved, lag tracking would resume as normal (until the
next tombstone is set).
## API changes
* `XGROUP CREATE` added with the optional named argument `[ENTRIESREAD entries-read]`
for explicitly specifying the new CG's counter.
* `XGROUP SETID` added with an optional positional argument `[ENTRIESREAD entries-read]`
for specifying the CG's counter.
* `XINFO` reports the maximal tombstone ID, the recorded first entry ID, and total
number of entries added to the stream.
* `XINFO` reports the current lag and logical read counter of CGs.
* `XSETID` is an internal command that's used in replication/aof. It has been added with
the optional positional arguments `[ENTRIESADDED entries-added] [MAXDELETEDID max-deleted-entry-id]`
for propagating the CG's offset and maximal tombstone ID of the stream.
## The generic unsolved problem
The current stream implementation doesn't provide an efficient way to obtain the
approximate/exact size of a range of entries. While it could've been nice to have
that ability (#5813) in general, let alone specifically in the context of CGs, the risk
and complexities involved in such implementation are in all likelihood prohibitive.
## A refactoring note
The `streamGetEdgeID` has been refactored to accommodate both the existing seek
of any entry as well as seeking non-deleted entries (the addition of the `skip_tombstones`
argument). Furthermore, this refactoring also migrated the seek logic to use the
`streamIterator` (rather than `raxIterator`) that was, in turn, extended with the
`skip_tombstones` Boolean struct field to control the emission of these.
Co-authored-by: Guy Benoish <guy.benoish@redislabs.com>
Co-authored-by: Oran Agra <oran@redislabs.com>
Make sure the status return from loading multiple AOF files reflects the overall
result, not just the one of the last file.
When one of the AOF files succeeded to load, but the last AOF file
was empty, the loadAppendOnlyFiles will return AOF_EMPTY.
This commit changes this behavior, and return AOF_OK in that case.
This can happen for example, when loading old AOF file, and no more commands processed,
the manifest file will include base AOF file with data, and empty incr AOF file.
Co-authored-by: chenyang8094 <chenyang8094@users.noreply.github.com>
Co-authored-by: Oran Agra <oran@redislabs.com>
Modifications of this PR:
1. Support the verification of `Multi Part AOF`, while still maintaining support for the
old-style `AOF/RDB-preamble`. `redis-check-aof` will automatically choose which
mode to use according to the incoming file format.
`Usage: redis-check-aof [--fix|--truncate-to-timestamp $timestamp] <AOF/manifest>`
2. Refactor part of the code to make it easier to understand
3. Currently only supports truncate (`--fix` or `--truncate-to-timestamp`) the last AOF
file (may be `BASE` or `INCR`)
The reasons for 3 above:
- for `--fix`: Only the last AOF may be truncated, this is guaranteed by redis
- for `--truncate-to-timestamp`: Normally, we only have `BASE` + `INCR` files
at most, and `BASE` cannot be truncated(It only contains a timestamp annotation
at the beginning of the file), so only `INCR` can be truncated. If we have a
`BASE+INCR1+INCR2` file (meaning we have an interrupted AOFRW), Only `INCR2`
files can be truncated at this time. If we still insist on truncate `INCR1`, we need to
manually delete `INCR2` and update the manifest file, then re-run `redis-check-aof`
- If we want to support truncate any file, we need to add very complicated code to support
the atomic modification of multiple file deletion and update manifest, I think this is unnecessary
In order to make sure no more commands processed, we wait that
the 'load handlers' will disconncet.
The test by mistake waited on the (last) slave instead of the master.
Added regression tests for #10020 / #10081 / #10243.
The above PRs fixed some crashes due to an asserting,
see function `clientHasPendingReplies` (introduced in #9166).
This commit added some tests to cover the above scenario.
These tests will all fail in #9166, althought fixed not,
there is value in adding these tests to cover and verify
the changes. And it also can cover #8868 (verify the logs).
Other changes:
1. Reduces the wait time in `waitForBgsave` and `waitForBgrewriteaof`
from 1s to 50ms, which should reduce the time for some tests.
2. Improve the test infra to print context when `assert_match` fails.
3. Improve the test infra to print `$error` when `assert_error` fails.
```
Expected an error matching 'ERR*' but got 'OK' (context: type eval line 4 cmd {assert_error "ERR*" {r set a b}} proc ::test)
```
Add check enough good slaves for write command when evaluating scripts.
This check is made before the script is executed, if we have function flags, and per redis command if we don't.
Co-authored-by: Phuc. Vo Trong <phucvt@vng.com.vn>
Co-authored-by: Oran Agra <oran@redislabs.com>
Co-authored-by: Meir Shpilraien (Spielrein) <meir@redis.com>
This PR attempts to solve two problems that happen sometime in valgrind:
`ERR Background save already in progress`
and
`not bgsave not aborted`
the test used to populate the database with DEBUG, which didn't
increment the dirty counter, so couldn't trigger an automatic bgsave.
then it used a manual bgsave, and aborted it (when it got aborted it
populated the dirty counter), and then it tried to do another bgsave.
that other bgsave could have failed if the automatic one already
started.
Failed on a non-valgrind run. on this line:
```
assert_equal 0 [$slave exists k]
```
the condition in `keyIsExpired` is `now > when`.
so if the test is really fast, maybe it can get to EXISTS exactly 1000 milliseconds after the
expiration was set, and the key isn't yet gone)
* Refactor EVAL timeout test
* since the test used r config set appendonly yes which generates a rewrite, it missed it's purpose
* Fix the bug that start_server returns before redis starts ready, which affects when multiple tests share the same dir.
* Elapsed time tracking no loner needed
Co-authored-by: Oran Agra <oran@redislabs.com>
This extends the previous fix (#10049) to address any form of
non-printable or whitespace character (including newlines, quotes,
non-printables, etc.)
Also, removes the limitation on appenddirname, to align with the way
filenames are handled elsewhere in Redis.
1. enable diskless replication by default
2. add a new config named repl-diskless-sync-max-replicas that enables
replication to start before the full repl-diskless-sync-delay was
reached.
3. put replica online sooner on the master (see below)
4. test suite uses repl-diskless-sync-delay of 0 to be faster
5. a few tests that use multiple replica on a pre-populated master, are
now using the new repl-diskless-sync-max-replicas
6. fix possible timing issues in a few cluster tests (see below)
put replica online sooner on the master
----------------------------------------------------
there were two tests that failed because they needed for the master to
realize that the replica is online, but the test code was actually only
waiting for the replica to realize it's online, and in diskless it could
have been before the master realized it.
changes include two things:
1. the tests wait on the right thing
2. issues in the master, putting the replica online in two steps.
the master used to put the replica as online in 2 steps. the first
step was to mark it as online, and the second step was to enable the
write event (only after getting ACK), but in fact the first step didn't
contains some of the tasks to put it online (like updating good slave
count, and sending the module event). this meant that if a test was
waiting to see that the replica is online form the point of view of the
master, and then confirm that the module got an event, or that the
master has enough good replicas, it could fail due to timing issues.
so now the full effect of putting the replica online, happens at once,
and only the part about enabling the writes is delayed till the ACK.
fix cluster tests
--------------------
I added some code to wait for the replica to sync and avoid race
conditions.
later realized the sentinel and cluster tests where using the original 5
seconds delay, so changed it to 0.
this means the other changes are probably not needed, but i suppose
they're still better (avoid race conditions)
# Redis Functions Flags
Following the discussion on #10025 Added Functions Flags support.
The PR is divided to 2 sections:
* Add named argument support to `redis.register_function` API.
* Add support for function flags
## `redis.register_function` named argument support
The first part of the PR adds support for named argument on `redis.register_function`, example:
```
redis.register_function{
function_name='f1',
callback=function()
return 'hello'
end,
description='some desc'
}
```
The positional arguments is also kept, which means that it still possible to write:
```
redis.register_function('f1', function() return 'hello' end)
```
But notice that it is no longer possible to pass the optional description argument on the positional
argument version. Positional argument was change to allow passing only the mandatory arguments
(function name and callback). To pass more arguments the user must use the named argument version.
As with positional arguments, the `function_name` and `callback` is mandatory and an error will be
raise if those are missing. Also, an error will be raise if an unknown argument name is given or the
arguments type is wrong.
Tests was added to verify the new syntax.
## Functions Flags
The second part of the PR is adding functions flags support.
Flags are given to Redis when the engine calls `functionLibCreateFunction`, supported flags are:
* `no-writes` - indicating the function perform no writes which means that it is OK to run it on:
* read-only replica
* Using FCALL_RO
* If disk error detected
It will not be possible to run a function in those situations unless the function turns on the `no-writes` flag
* `allow-oom` - indicate that its OK to run the function even if Redis is in OOM state, if the function will
not turn on this flag it will not be possible to run it if OOM reached (even if the function declares `no-writes`
and even if `fcall_ro` is used). If this flag is set, any command will be allow on OOM (even those that is
marked with CMD_DENYOOM). The assumption is that this flag is for advance users that knows its
meaning and understand what they are doing, and Redis trust them to not increase the memory usage.
(e.g. it could be an INCR or a modification on an existing key, or a DEL command)
* `allow-state` - indicate that its OK to run the function on stale replica, in this case we will also make
sure the function is only perform `stale` commands and raise an error if not.
* `no-cluster` - indicate to disallow running the function if cluster is enabled.
Default behaviure of functions (if no flags is given):
1. Allow functions to read and write
2. Do not run functions on OOM
3. Do not run functions on stale replica
4. Allow functions on cluster
### Lua API for functions flags
On Lua engine, it is possible to give functions flags as `flags` named argument:
```
redis.register_function{function_name='f1', callback=function() return 1 end, flags={'no-writes', 'allow-oom'}, description='description'}
```
The function flags argument must be a Lua table that contains all the requested flags, The following
will result in an error:
* Unknown flag
* Wrong flag type
Default behaviour is the same as if no flags are used.
Tests were added to verify all flags functionality
## Additional changes
* mark FCALL and FCALL_RO with CMD_STALE flag (unlike EVAL), so that they can run if the function was
registered with the `allow-stale` flag.
* Verify `CMD_STALE` on `scriptCall` (`redis.call`), so it will not be possible to call commands from script while
stale unless the command is marked with the `CMD_STALE` flags. so that even if the function is allowed while
stale we do not allow it to bypass the `CMD_STALE` flag of commands.
* Flags section was added to `FUNCTION LIST` command to provide the set of flags for each function:
```
> FUNCTION list withcode
1) 1) "library_name"
2) "test"
3) "engine"
4) "LUA"
5) "description"
6) (nil)
7) "functions"
8) 1) 1) "name"
2) "f1"
3) "description"
4) (nil)
5) "flags"
6) (empty array)
9) "library_code"
10) "redis.register_function{function_name='f1', callback=function() return 1 end}"
```
* Added API to get Redis version from within a script, The redis version can be provided using:
1. `redis.REDIS_VERSION` - string representation of the redis version in the format of MAJOR.MINOR.PATH
2. `redis.REDIS_VERSION_NUM` - number representation of the redis version in the format of `0x00MMmmpp`
(`MM` - major, `mm` - minor, `pp` - patch). The number version can be used to check if version is greater or less
another version. The string version can be used to return to the user or print as logs.
This new API is provided to eval scripts and functions, it also possible to use this API during functions loading phase.
Force create a BASE file (use a foreground `rewriteAppendOnlyFile`) when redis starts from an
empty data set and `appendonly` is yes.
The reasoning is that normally, after redis is running for some time, and the AOF has gone though
a few rewrites, there's always a base rdb file. and the scenario where the base file is missing, is
kinda rare (happens only at empty startup), so this change normalizes it.
But more importantly, there are or could be some complex modules that are started with some
configuration, when they create persistence they write that configuration to RDB AUX fields, so
that can can always know with which configuration the persistence file they're loading was
created (could be critical). there is (was) one scenario in which they could load their persisted data,
and that configuration was missing, and this change fixes it.
Add a new module event: REDISMODULE_SUBEVENT_PERSISTENCE_SYNC_AOF_START, similar to
REDISMODULE_SUBEVENT_PERSISTENCE_AOF_START which is async.
Co-authored-by: Oran Agra <oran@redislabs.com>
# Redis Function Libraries
This PR implements Redis Functions Libraries as describe on: https://github.com/redis/redis/issues/9906.
Libraries purpose is to provide a better code sharing between functions by allowing to create multiple
functions in a single command. Functions that were created together can safely share code between
each other without worrying about compatibility issues and versioning.
Creating a new library is done using 'FUNCTION LOAD' command (full API is described below)
This PR introduces a new struct called libraryInfo, libraryInfo holds information about a library:
* name - name of the library
* engine - engine used to create the library
* code - library code
* description - library description
* functions - the functions exposed by the library
When Redis gets the `FUNCTION LOAD` command it creates a new empty libraryInfo.
Redis passes the `CODE` to the relevant engine alongside the empty libraryInfo.
As a result, the engine will create one or more functions by calling 'libraryCreateFunction'.
The new funcion will be added to the newly created libraryInfo. So far Everything is happening
locally on the libraryInfo so it is easy to abort the operation (in case of an error) by simply
freeing the libraryInfo. After the library info is fully constructed we start the joining phase by
which we will join the new library to the other libraries currently exist on Redis.
The joining phase make sure there is no function collision and add the library to the
librariesCtx (renamed from functionCtx). LibrariesCtx is used all around the code in the exact
same way as functionCtx was used (with respect to RDB loading, replicatio, ...).
The only difference is that apart from function dictionary (maps function name to functionInfo
object), the librariesCtx contains also a libraries dictionary that maps library name to libraryInfo object.
## New API
### FUNCTION LOAD
`FUNCTION LOAD <ENGINE> <LIBRARY NAME> [REPLACE] [DESCRIPTION <DESCRIPTION>] <CODE>`
Create a new library with the given parameters:
* ENGINE - REPLACE Engine name to use to create the library.
* LIBRARY NAME - The new library name.
* REPLACE - If the library already exists, replace it.
* DESCRIPTION - Library description.
* CODE - Library code.
Return "OK" on success, or error on the following cases:
* Library name already taken and REPLACE was not used
* Name collision with another existing library (even if replace was uses)
* Library registration failed by the engine (usually compilation error)
## Changed API
### FUNCTION LIST
`FUNCTION LIST [LIBRARYNAME <LIBRARY NAME PATTERN>] [WITHCODE]`
Command was modified to also allow getting libraries code (so `FUNCTION INFO` command is no longer
needed and removed). In addition the command gets an option argument, `LIBRARYNAME` allows you to
only get libraries that match the given `LIBRARYNAME` pattern. By default, it returns all libraries.
### INFO MEMORY
Added number of libraries to `INFO MEMORY`
### Commands flags
`DENYOOM` flag was set on `FUNCTION LOAD` and `FUNCTION RESTORE`. We consider those commands
as commands that add new data to the dateset (functions are data) and so we want to disallows
to run those commands on OOM.
## Removed API
* FUNCTION CREATE - Decided on https://github.com/redis/redis/issues/9906
* FUNCTION INFO - Decided on https://github.com/redis/redis/issues/9899
## Lua engine changes
When the Lua engine gets the code given on `FUNCTION LOAD` command, it immediately runs it, we call
this run the loading run. Loading run is not a usual script run, it is not possible to invoke any
Redis command from within the load run.
Instead there is a new API provided by `library` object. The new API's:
* `redis.log` - behave the same as `redis.log`
* `redis.register_function` - register a new function to the library
The loading run purpose is to register functions using the new `redis.register_function` API.
Any attempt to use any other API will result in an error. In addition, the load run is has a time
limit of 500ms, error is raise on timeout and the entire operation is aborted.
### `redis.register_function`
`redis.register_function(<function_name>, <callback>, [<description>])`
This new API allows users to register a new function that will be linked to the newly created library.
This API can only be called during the load run (see definition above). Any attempt to use it outside
of the load run will result in an error.
The parameters pass to the API are:
* function_name - Function name (must be a Lua string)
* callback - Lua function object that will be called when the function is invokes using fcall/fcall_ro
* description - Function description, optional (must be a Lua string).
### Example
The following example creates a library called `lib` with 2 functions, `f1` and `f1`, returns 1 and 2 respectively:
```
local function f1(keys, args)
return 1
end
local function f2(keys, args)
return 2
end
redis.register_function('f1', f1)
redis.register_function('f2', f2)
```
Notice: Unlike `eval`, functions inside a library get the KEYS and ARGV as arguments to the
functions and not as global.
### Technical Details
On the load run we only want the user to be able to call a white list on API's. This way, in
the future, if new API's will be added, the new API's will not be available to the load run
unless specifically added to this white list. We put the while list on the `library` object and
make sure the `library` object is only available to the load run by using [lua_setfenv](https://www.lua.org/manual/5.1/manual.html#lua_setfenv) API. This API allows us to set
the `globals` of a function (and all the function it creates). Before starting the load run we
create a new fresh Lua table (call it `g`) that only contains the `library` API (we make sure
to set global protection on this table just like the general global protection already exists
today), then we use [lua_setfenv](https://www.lua.org/manual/5.1/manual.html#lua_setfenv)
to set `g` as the global table of the load run. After the load run finished we update `g`
metatable and set `__index` and `__newindex` functions to be `_G` (Lua default globals),
we also pop out the `library` object as we do not need it anymore.
This way, any function that was created on the load run (and will be invoke using `fcall`) will
see the default globals as it expected to see them and will not have the `library` API anymore.
An important outcome of this new approach is that now we can achieve a distinct global table
for each library (it is not yet like that but it is very easy to achieve it now). In the future we can
decide to remove global protection because global on different libraries will not collide or we
can chose to give different API to different libraries base on some configuration or input.
Notice that this technique was meant to prevent errors and was not meant to prevent malicious
user from exploit it. For example, the load run can still save the `library` object on some local
variable and then using in `fcall` context. To prevent such a malicious use, the C code also make
sure it is running in the right context and if not raise an error.
Following #10038.
This PR introduces two changes.
1. Show the elapsed time of a single test in the test output, in order to have a more
detailed understanding of the changes in test run time.
2. Speedup two tests related to `key-load-delay` configuration.
other tests do not seem to be affected by #10003.
Implement Multi-Part AOF mechanism to avoid overheads during AOFRW.
Introducing a folder with multiple AOF files tracked by a manifest file.
The main issues with the the original AOFRW mechanism are:
* buffering of commands that are processed during rewrite (consuming a lot of RAM)
* freezes of the main process when the AOFRW completes to drain the remaining part of the buffer and fsync it.
* double disk IO for the data that arrives during AOFRW (had to be written to both the old and new AOF files)
The main modifications of this PR:
1. Remove the AOF rewrite buffer and related code.
2. Divide the AOF into multiple files, they are classified as two types, one is the the `BASE` type,
it represents the full amount of data (Maybe AOF or RDB format) after each AOFRW, there is only
one `BASE` file at most. The second is `INCR` type, may have more than one. They represent the
incremental commands since the last AOFRW.
3. Use a AOF manifest file to record and manage these AOF files mentioned above.
4. The original configuration of `appendfilename` will be the base part of the new file name, for example:
`appendonly.aof.1.base.rdb` and `appendonly.aof.2.incr.aof`
5. Add manifest-related TCL tests, and modified some existing tests that depend on the `appendfilename`
6. Remove the `aof_rewrite_buffer_length` field in info.
7. Add `aof-disable-auto-gc` configuration. By default we're automatically deleting HISTORY type AOFs.
It also gives users the opportunity to preserve the history AOFs. just for testing use now.
8. Add AOFRW limiting measure. When the AOFRW failures reaches the threshold (3 times now),
we will delay the execution of the next AOFRW by 1 minute. If the next AOFRW also fails, it will be
delayed by 2 minutes. The next is 4, 8, 16, the maximum delay is 60 minutes (1 hour). During the limit
period, we can still use the 'bgrewriteaof' command to execute AOFRW immediately.
9. Support upgrade (load) data from old version redis.
10. Add `appenddirname` configuration, as the directory name of the append only files. All AOF files and
manifest file will be placed in this directory.
11. Only the last AOF file (BASE or INCR) can be truncated. Otherwise redis will exit even if
`aof-load-truncated` is enabled.
Co-authored-by: Oran Agra <oran@redislabs.com>
This commit adds DUMP RESTORES tests for the -x and -X options.
I wanted to add it in #9980 which introduce the -X option, but
back then i failed due to some errors (related to redis-cli call).
To avoid data loss, this commit adds a grace period for lagging replicas to
catch up the replication offset.
Done:
* Wait for replicas when shutdown is triggered by SIGTERM and SIGINT.
* Wait for replicas when shutdown is triggered by the SHUTDOWN command. A new
blocked client type BLOCKED_SHUTDOWN is introduced, allowing multiple clients
to call SHUTDOWN in parallel.
Note that they don't expect a response unless an error happens and shutdown is aborted.
* Log warning for each replica lagging behind when finishing shutdown.
* CLIENT_PAUSE_WRITE while waiting for replicas.
* Configurable grace period 'shutdown-timeout' in seconds (default 10).
* New flags for the SHUTDOWN command:
- NOW disables the grace period for lagging replicas.
- FORCE ignores errors writing the RDB or AOF files which would normally
prevent a shutdown.
- ABORT cancels ongoing shutdown. Can't be combined with other flags.
* New field in the output of the INFO command: 'shutdown_in_milliseconds'. The
value is the remaining maximum time to wait for lagging replicas before
finishing the shutdown. This field is present in the Server section **only**
during shutdown.
Not directly related:
* When shutting down, if there is an AOF saving child, it is killed **even** if AOF
is disabled. This can happen if BGREWRITEAOF is used when AOF is off.
* Client pause now has end time and type (WRITE or ALL) per purpose. The
different pause purposes are *CLIENT PAUSE command*, *failover* and
*shutdown*. If clients are unpaused for one purpose, it doesn't affect client
pause for other purposes. For example, the CLIENT UNPAUSE command doesn't
affect client pause initiated by the failover or shutdown procedures. A completed
failover or a failed shutdown doesn't unpause clients paused by the CLIENT
PAUSE command.
Notes:
* DEBUG RESTART doesn't wait for replicas.
* We already have a warning logged when a replica disconnects. This means that
if any replica connection is lost during the shutdown, it is either logged as
disconnected or as lagging at the time of exit.
Co-authored-by: Oran Agra <oran@redislabs.com>
This is needed in order to ease the deployment of functions for ephemeral cases, where user
needs to spin up a server with functions pre-loaded.
#### Details:
* Added `--functions-rdb` option to _redis-cli_.
* Functions only rdb via `REPLCONF rdb-filter-only functions`. This is a placeholder for a space
separated inclusion filter for the RDB. In the future can be `REPLCONF rdb-filter-only
"functions db:3 key-patten:user*"` and a complementing `rdb-filter-exclude` `REPLCONF`
can also be added.
* Handle "slave requirements" specification to RDB saving code so we can use the same RDB
when different slaves express the same requirements (like functions-only) and not share the
RDB when their requirements differ. This is currently just a flags `int`, but can be extended to
a more complex structure with various filter fields.
* make sure to support filters only in diskless replication mode (not to override the persistence file),
we do that by forcing diskless (even if disabled by config)
other changes:
* some refactoring in rdb.c (extract portion of a big function to a sub-function)
* rdb_key_save_delay used in AOFRW too
* sendChildInfo takes the number of updated keys (incremental, rather than absolute)
Co-authored-by: Oran Agra <oran@redislabs.com>
This pr is mainly to solve the problem that redis process cannot be exited normally, due to changes in #10003.
When a test uses the `key-load-delay` config to delay loading, but does not reset it at the end of the test, will lead to server wait for the loading to reach the event
loop (once in 2mb) before actually shutting down.
There are two changes in this commit:
1. Add -X option to redis-cli.
Currently `-x` can only be used to provide the last argument,
so you can do `redis-cli dump keyname > key.dump`,
and then do `redis-cli -x restore keyname 0 < key.dump`.
But what if you want to add the replace argument (which comes last?).
oran suggested adding such usage:
`redis-cli -X <tag> restore keyname <tag> replace < key.dump`
i.e. you're able to provide a string in the arguments that's gonna be
substituted with the content from stdin.
Note that the tag name should not conflict with others non-replaced args.
And the -x and -X options are conflicting.
Some usages:
```
[root]# echo mypasswd | src/redis-cli -X passwd_tag mset username myname password passwd_tag OK
[root]# echo username > username.txt
[root]# head -c -1 username.txt | src/redis-cli -X name_tag mget name_tag password
1) "myname"
2) "mypasswd\n"
```
2. Handle the combination of both `-x` and `--cluster` or `-X` and `--cluster`
Extend the broadcast option to receive the last arg or <tag> arg from the stdin.
Now we can use `redis-cli -x --cluster call <host>:<port> cmd`,
or `redis-cli -X <tag> --cluster call <host>:<port> cmd <tag>`.
(support part of #9899)
issue started failing after #9878 was merged (made an exiting test more sensitive)
looks like #9982 didn't help, tested this one and it seems to work better.
this commit does two things:
1. reduce the extra delay i added earlier and instead add more keys, the effect no duration
of replication is the same, but the intervals in which the server is responsive to the tcl client is higher.
2. improve the test infra to print context when assert_error fails.
## background
Till now CONFIG SET was blocked during loading.
(In the not so distant past, GET was disallowed too)
We recently (not released yet) added an async-loading mode, see #9323,
and during that time it'll serve CONFIG SET and any other command.
And now we realized (#9770) that some configs, and commands are dangerous
during async-loading.
## changes
* Allow most CONFIG SET during loading (both on async-loading and normal loading)
* Allow CONFIG REWRITE and CONFIG RESETSTAT during loading
* Block a few config during loading (`appendonly`, `repl-diskless-load`, and `dir`)
* Block a few commands during loading (list below)
## the blocked commands:
* SAVE - obviously we don't wanna start a foregreound save during loading 8-)
* BGSAVE - we don't mind to schedule one, but we don't wanna fork now
* BGREWRITEAOF - we don't mind to schedule one, but we don't wanna fork now
* MODULE - we obviously don't wanna unload a module during replication / rdb loading
(MODULE HELP and MODULE LIST are not blocked)
* SYNC / PSYNC - we're in the middle of RDB loading from master, must not allow sync
requests now.
* REPLICAOF / SLAVEOF - we're in the middle of replicating, maybe it makes sense to let
the user abort it, but he couldn't do that so far, i don't wanna take any risk of bugs due to odd state.
* CLUSTER - only allow [HELP, SLOTS, NODES, INFO, MYID, LINKS, KEYSLOT, COUNTKEYSINSLOT,
GETKEYSINSLOT, RESET, REPLICAS, COUNT_FAILURE_REPORTS], for others, preserve the status quo
## other fixes
* processEventsWhileBlocked had an issue when being nested, this could happen with a busy script
during async loading (new), but also in a busy script during AOF loading (old). this lead to a crash in
the scenario described in #6988
# Background
The main goal of this PR is to remove relevant logics on Lua script verbatim replication,
only keeping effects replication logic, which has been set as default since Redis 5.0.
As a result, Lua in Redis 7.0 would be acting the same as Redis 6.0 with default
configuration from users' point of view.
There are lots of reasons to remove verbatim replication.
Antirez has listed some of the benefits in Issue #5292:
>1. No longer need to explain to users side effects into scripts.
They can do whatever they want.
>2. No need for a cache about scripts that we sent or not to the slaves.
>3. No need to sort the output of certain commands inside scripts
(SMEMBERS and others): this both simplifies and gains speed.
>4. No need to store scripts inside the RDB file in order to startup correctly.
>5. No problems about evicting keys during the script execution.
When looking back at Redis 5.0, antirez and core team decided to set the config
`lua-replicate-commands yes` by default instead of removing verbatim replication
directly, in case some bad situations happened. 3 years later now before Redis 7.0,
it's time to remove it formally.
# Changes
- configuration for lua-replicate-commands removed
- created config file stub for backward compatibility
- Replication script cache removed
- this is useless under script effects replication
- relevant statistics also removed
- script persistence in RDB files is also removed
- Propagation of SCRIPT LOAD and SCRIPT FLUSH to replica / AOF removed
- Deterministic execution logic in scripts removed (i.e. don't run write commands
after random ones, and sorting output of commands with random order)
- the flags indicating which commands have non-deterministic results are kept as hints to clients.
- `redis.replicate_commands()` & `redis.set_repl()` changed
- now `redis.replicate_commands()` does nothing and return an 1
- ...and then `redis.set_repl()` can be issued before `redis.replicate_commands()` now
- Relevant TCL cases adjusted
- DEBUG lua-always-replicate-commands removed
# Other changes
- Fix a recent bug comparing CLIENT_ID_AOF to original_client->flags instead of id. (introduced in #9780)
Co-authored-by: Oran Agra <oran@redislabs.com>
- add needs:debug flag for some tests
- disable "save" in external tests (speedup?)
- use debug_digest proc instead of debug command directly so it can be skipped
- use OBJECT ENCODING instead of DEBUG OBJECT to get encoding
- add a proc for OBJECT REFCOUNT so it can be skipped
- move a bunch of tests in latency_monitor tests to happen later so that latency monitor has some values in it
- add missing close_replication_stream calls
- make sure to close the temp client if DEBUG LOG fails
When rdb creates a consumer without determining whether it exists in advance,
it may return NULL and crash if it encounters corrupt data with duplicate consumers.
A test failure was reported in Daily CI.
`Crash report generated on SIGABRT` with FreeBSD.
```
*** [err]: Crash report generated on SIGABRT in tests/integration/logging.tcl
Expected [string match *crashed by signal* ### Starting...(logs) in tests/integration/logging.tcl]
```
It look like `tail -1000` was executed too early, before it
printed out all the crash logs. We can give it a few more
chances by using `wait_for_log_messages`.
Other changes:
1. In `Server is able to generate a stack trace on selected systems`,
use `wait_for_log_messages`to reduce the lines of code. And if it
fails, there are more detailed logs that can be printed.
2. In `Crash report generated on DEBUG SEGFAULT`, we also use
`wait_for_log_messages` to avoid possible timing issues.
Redis function unit is located inside functions.c
and contains Redis Function implementation:
1. FUNCTION commands:
* FUNCTION CREATE
* FCALL
* FCALL_RO
* FUNCTION DELETE
* FUNCTION KILL
* FUNCTION INFO
2. Register engine
In addition, this commit introduce the first engine
that uses the Redis Function capabilities, the
Lua engine.
Writable replicas now no longer use the values of expired keys. Expired keys are
deleted when lookupKeyWrite() is used, even on a writable replica. Previously,
writable replicas could use the value of an expired key in write commands such
as INCR, SUNIONSTORE, etc..
This commit also sorts out the mess around the functions lookupKeyRead() and
lookupKeyWrite() so they now indicate what we intend to do with the key and
are not affected by the command calling them.
Multi-key commands like SUNIONSTORE, ZUNIONSTORE, COPY and SORT with the
store option now use lookupKeyRead() for the keys they're reading from (which will
not allow reading from logically expired keys).
This commit also fixes a bug where PFCOUNT could return a value of an
expired key.
Test modules commands have their readonly and write flags updated to correctly
reflect their lookups for reading or writing. Modules are not required to
correctly reflect this in their command flags, but this change is made for
consistency since the tests serve as usage examples.
Fixes#6842. Fixes#7475.
Part three of implementing #8702, following #8887 and #9366 .
## Description of the feature
1. Replace the ziplist container of quicklist with listpack.
2. Convert existing quicklist ziplists on RDB loading time. an O(n) operation.
## Interface changes
1. New `list-max-listpack-size` config is an alias for `list-max-ziplist-size`.
2. Replace `debug ziplist` command with `debug listpack`.
## Internal changes
1. Add `lpMerge` to merge two listpacks . (same as `ziplistMerge`)
2. Add `lpRepr` to print info of listpack which is used in debugCommand and `quicklistRepr`. (same as `ziplistRepr`)
3. Replace `QUICKLIST_NODE_CONTAINER_ZIPLIST` with `QUICKLIST_NODE_CONTAINER_PACKED`(following #9357 ).
It represent that a quicklistNode is a packed node, as opposed to a plain node.
4. Remove `createZiplistObject` method, which is never used.
5. Calculate listpack entry size using overhead overestimation in `quicklistAllowInsert`.
We prefer an overestimation, which would at worse lead to a few bytes below the lowest limit of 4k.
## Improvements
1. Calling `lpShrinkToFit` after converting Ziplist to listpack, which was missed at #9366.
2. Optimize `quicklistAppendPlainNode` to avoid memcpy data.
## Bugfix
1. Fix crash in `quicklistRepr` when ziplist is compressed, introduced from #9366.
## Test
1. Add unittest for `lpMerge`.
2. Modify the old quicklist ziplist corrupt dump test.
Co-authored-by: Oran Agra <oran@redislabs.com>
In #9323, when `repl-diskless-load` is enabled and set to `swapdb`,
if the master replication ID hasn't changed, we can load data-set
asynchronously, and serving read commands during the full resync.
In `diskless loading short read` test, after a loading successfully,
we will wait for the loading to stop and continue the for loop.
After the introduction of `async_loading`, we also need to check it.
Otherwise the next loop will start too soon, may trigger a timing issue.
