Redis loading data from disk, and a Redis slave disconnected from its
master with serve-stale-data disabled, are two conditions where
commands are normally refused by Redis, returning an error.
However there is no reason to disable Pub/Sub commands as well, given
that this layer does not interact with the dataset. To allow Pub/Sub in
as many contexts as possible is especially interesting now that Redis
Sentinel uses Pub/Sub of a Redis master as a communication channel
between Sentinels.
This commit allows Pub/Sub to be used in the above two contexts where
it was previously denied.
The REPLCONF command is an internal command (not designed to be directly
used by normal clients) that allows a slave to set some replication
related state in the master before issuing SYNC to start the
replication.
The initial motivation for this command, and the only reason currently
it is used by the implementation, is to let the slave instance
communicate its listening port to the slave, so that the master can
show all the slaves with their listening ports in the "replication"
section of the INFO output.
This allows clients to auto discover and query all the slaves attached
into a master.
Currently only a single option of the REPLCONF command is supported, and
it is called "listening-port", so the slave now starts the replication
process with something like the following chat:
REPLCONF listening-prot 6380
SYNC
Note that this works even if the master is an older version of Redis and
does not understand REPLCONF, because the slave ignores the REPLCONF
error.
In the future REPLCONF can be used for partial replication and other
replication related features where there is the need to exchange
information between master and slave.
NOTE: This commit also fixes a bug: the INFO outout already carried
information about slaves, but the port was broken, and was obtained
with getpeername(2), so it was actually just the ephemeral port used
by the slave to connect to the master as a client.
The way we compared the authentication password using strcmp() allowed
an attacker to gain information about the password using a well known
class of attacks called "timing attacks".
The bug appears to be practically not exploitable in most modern systems
running Redis since even using multiple bytes of differences in the
input at a time instead of one the difference in running time in in the
order of 10 nanoseconds, making it hard to exploit even on LAN. However
attacks always get better so we are providing a fix ASAP.
The new implementation uses two fixed length buffers and a constant time
comparison function, with the goal of:
1) Completely avoid leaking information about the content of the
password, since the comparison is always performed between 512
characters and without conditionals.
2) Partially avoid leaking information about the length of the
password.
About "2" we still have a stage in the code where the real password and
the user provided password are copied in the static buffers, we also run
two strlen() operations against the two inputs, so the running time
of the comparison is a fixed amount plus a time proportional to
LENGTH(A)+LENGTH(B). This means that the absolute time of the operation
performed is still related to the length of the password in some way,
but there is no way to change the input in order to get a difference in
the execution time in the comparison that is not just proportional to
the string provided by the user (because the password length is fixed).
Thus in practical terms the user should try to discover LENGTH(PASSWORD)
looking at the whole execution time of the AUTH command and trying to
guess a proportionality between the whole execution time and the
password length: this appears to be mostly unfeasible in the real world.
Also protecting from this attack is not very useful in the case of Redis
as a brute force attack is anyway feasible if the password is too short,
while with a long password makes it not an issue that the attacker knows
the length.
The 'persistence' section of INFO output now contains additional four
fields related to RDB and AOF persistence:
rdb_last_bgsave_time_sec Duration of latest BGSAVE in sec.
rdb_current_bgsave_time_sec Duration of current BGSAVE in sec.
aof_last_rewrite_time_sec Duration of latest AOF rewrite in sec.
aof_current_rewrite_time_sec Duration of current AOF rewrite in sec.
The 'current' fields are set to -1 if a BGSAVE / AOF rewrite is not in
progress. The 'last' fileds are set to -1 if no previous BGSAVE / AOF
rewrites were performed.
Additionally a few fields in the persistence section were renamed for
consistency:
changes_since_last_save -> rdb_changes_since_last_save
bgsave_in_progress -> rdb_bgsave_in_progress
last_save_time -> rdb_last_save_time
last_bgsave_status -> rdb_last_bgsave_status
bgrewriteaof_in_progress -> aof_rewrite_in_progress
bgrewriteaof_scheduled -> aof_rewrite_scheduled
After the renaming, fields in the persistence section start with rdb_ or
aof_ prefix depending on the persistence method they describe.
The field 'loading' and related fields are not prefixed because they are
unique for both the persistence methods.
The motivation for this new commands is to be search in the usage of
Redis for real time statistics. See the article "Fast real time metrics
using Redis".
http://blog.getspool.com/2011/11/29/fast-easy-realtime-metrics-using-redis-bitmaps/
In general Redis strings when used as bitmaps using the SETBIT/GETBIT
command provide a very space-efficient and fast way to store statistics.
For instance in a web application with users, every user can be
associated with a key that shows every day in which the user visited the
web service. This information can be really valuable to extract user
behaviour information.
With Redis bitmaps doing this is very simple just saying that a given
day is 0 (the data the service was put online) and all the next days are
1, 2, 3, and so forth. So with SETBIT it is possible to set the bit
corresponding to the current day every time the user visits the site.
It is possible to take the count of the bit sets on the run, this is
extremely easy using a Lua script. However a fast bit count native
operation can be useful, especially if it can operate on ranges, or when
the string is small like in the case of days (even if you consider many
years it is still extremely little data).
For this reason BITOP was introduced. The command counts the number of
bits set to 1 in a string, with optional range:
BITCOUNT key [start end]
The start/end parameters are similar to GETRANGE. If omitted the whole
string is tested.
Population counting is more useful when bit-level operations like AND,
OR and XOR are avaialble. For instance I can test multiple users to see
the number of days three users visited the site at the same time. To do
this we can take the AND of all the bitmaps, and then count the set bits.
For this reason the BITOP command was introduced:
BITOP [AND|OR|XOR|NOT] dest_key src_key1 src_key2 src_key3 ... src_keyN
In the special case of NOT (that inverts the bits) only one source key
can be passed.
The judicious use of BITCOUNT and BITOP combined can lead to interesting
use cases with very space efficient representation of data.
The implementation provided is still not tested and optimized for speed,
next commits will introduce unit tests. Later the implementation will be
profiled to see if it is possible to gain an important amount of speed
without making the code much more complex.
The INFO output, persistence section, already contained the field
describing the size of the current AOF buffer to flush on disk. However
the other AOF buffer, used to accumulate changes during an AOF rewrite,
was not mentioned in the INFO output.
This commit introduces a new field called aof_rewrite_buffer_length with
the length of the rewrite buffer.
During the AOF rewrite process, the parent process needs to accumulate
the new writes in an in-memory buffer: when the child will terminate the
AOF rewriting process this buffer (that ist the difference between the
dataset when the rewrite was started, and the current dataset) is
flushed to the new AOF file.
We used to implement this buffer using an sds.c string, but sds.c has a
2GB limit. Sometimes the dataset can be big enough, the amount of writes
so high, and the rewrite process slow enough that we overflow the 2GB
limit, causing a crash, documented on github by issue #504.
In order to prevent this from happening, this commit introduces a new
system to accumulate writes, implemented by a linked list of blocks of
10 MB each, so that we also avoid paying the reallocation cost.
Note that theoretically modern operating systems may implement realloc()
simply as a remaping of the old pages, thus with very good performances,
see for instance the mremap() syscall on Linux. However this is not
always true, and jemalloc by default avoids doing this because there are
issues with the current implementation of mremap().
For this reason we are using a linked list of blocks instead of a single
block that gets reallocated again and again.
The changes in this commit lacks testing, that will be performed before
merging into the unstable branch. This fix will not enter 2.4 because it
is too invasive. However 2.4 will log a warning when the AOF rewrite
buffer is near to the 2GB limit.
activeExpireCycle() can consume no more than a few milliseconds per
iteration. This commit improves the precision of the check for the time
elapsed in two ways:
1) We check every 16 iterations instead of the main loop instead of 256.
2) We reset iterations at the start of the function and not every time
we switch to the next database, so the check is correctly performed
every 16 iterations.
A previous commit introduced REDIS_HZ define that changes the frequency
of calls to the serverCron() Redis function. This commit improves
different related things:
1) Software watchdog: now the minimal period can be set according to
REDIS_HZ. The minimal period is two times the timer period, that is:
(1000/REDIS_HZ)*2 milliseconds
2) The incremental rehashing is now performed in the expires dictionary
as well.
3) The activeExpireCycle() function was improved in different ways:
- Now it checks if it already used too much time using microseconds
instead of milliseconds for better precision.
- The time limit is now calculated correctly, in the previous version
the division was performed before of the multiplication resulting in
a timelimit of 0 if HZ was big enough.
- Databases with less than 1% of buckets fill in the hash table are
skipped, because getting random keys is too expensive in this
condition.
4) tryResizeHashTables() is now called at every timer call, we need to
match the number of calls we do to the expired keys colleciton cycle.
5) REDIS_HZ was raised to 100.
Redis uses a function called serverCron() that is very similar to the
timer interrupt of an operating system. This function is used to handle
a number of asynchronous things, like active expired keys collection,
clients timeouts, update of statistics, things related to the cluster
and replication, triggering of BGSAVE and AOF rewrite process, and so
forth.
In the past the timer was called 1 time per second. At some point it was
raised to 10 times per second, but it still was fixed and could not be
changed even at compile time, because different functions called from
serverCron() assumed a given fixed frequency.
This commmit makes the frequency configurable, so that it is simpler to
pick a good tradeoff between overhead of this function (that is usually
very small) and the responsiveness of Redis during a few critical
circumstances where a lot of work is done inside the timer.
An example of such a critical condition is mass-expire of a lot of keys
in the same second. Up to a given percentage of CPU time is used to
perform expired keys collection per expire cylce. Now changing the
REDIS_HZ macro it is possible to do less work but more times per second
in order to block the server for less time.
If this patch will work well in our tests it will enter Redis 2.6-final.
If a large amonut of keys are all expiring about at the same time, the
"active" expired keys collection cycle used to block as far as the
percentage of already expired keys was >= 25% of the total population of
keys with an expire set.
This could block the server even for many seconds in order to reclaim
memory ASAP. The new algorithm uses at max a small amount of
milliseconds per cycle, even if this means reclaiming the memory less
promptly it also means a more responsive server.
We used to reply -ERR ... message ..., now the reply is
instead -MASTERDOWN ... message ... so that it can be distinguished
easily by the other error conditions.
This commit reverts most of c575766202, in
order to use back main stack for signal handling.
The main reason is that otherwise it is completely pointless that we do
a lot of efforts to print the stack trace on crash, and the content of
the stack and registers as well. Using an alternate stack broken this
feature completely.
This new field counts all the times Redis is configured with AOF enabled and
fsync policy 'everysec', but the previous fsync performed by the
background thread was not able to complete within two seconds, forcing
Redis to perform a write against the AOF file while the fsync is still
in progress (likely a blocking operation).
This commit introduces support for read only slaves via redis.conf and CONFIG GET/SET commands. Also various semantical fixes are implemented here:
1) MULTI/EXEC with only read commands now work where the server is into a state where writes (or commands increasing memory usage) are not allowed. Before this patch everything inside a transaction would fail in this conditions.
2) Scripts just calling read-only commands will work against read only
slaves, when the server is out of memory, or when persistence is into an
error condition. Before the patch EVAL always failed in this condition.
Use a simple protocol between clientsCron() and helper functions to
understand if the client is still valind and clientsCron() should
continue processing or if the client was freed and we should continue
with the next one.
