Minor test case addition.
Currently GETRANGE command does not have the test case coverage for the scenarios:
An error is returned when key exists but of different type
Added missing test cases for getrange command.
this pr fix two wrongs：
1. When client’s querybuf is pre-allocated for a fat argv, we need to update the
querybuf_peak of the client immediately to completely avoid the unexpected
shrinking of querybuf in the next clientCron (before data arrives to set the peak).
2. the protocol's bulklen does not include `\r\n`, but the allocation and the data we
read does. so in `clientsCronResizeQueryBuffer`, the `resize` or `querybuf_peak`
should add these 2 bytes.
the first bug is likely to hit us on large payloads over slow connections, in which case
transferring the payload can take longer and a cron event will be triggered (specifically
if there are not a lot of clients)
There is are some missing test cases for SUBSTR command.
These might already be covered by GETRANGE, but no harm in adding them since they're simple.
Added 3 test case.
* start > stop
* start and stop both greater than string length
* when no key is present.
Currently LINSERT command does not have the test case coverage for following scenarios.
1. When key does not exist, it is considered an empty list and no operation is performed.
2. An error is returned when key exists but does not hold a list value.
Added above two missing test cases for linsert command.
* Add RM_ReplyWithErrorFormat that can support format
Reply with the error create from a printf format and arguments.
If the error code is already passed in the string 'fmt', the error
code provided is used, otherwise the string "-ERR " for the generic
error code is automatically added.
The usage is, for example:
RedisModule_ReplyWithErrorFormat(ctx, "An error: %s", "foo");
RedisModule_ReplyWithErrorFormat(ctx, "-WRONGTYPE Wrong Type: %s", "foo");
The function always returns REDISMODULE_OK.
The MacOS CI in github actions often hangs without any logs. GH argues that
it's due to resource utilization, either running out of disk space, memory, or CPU
starvation, and thus the runner is terminated.
This PR contains multiple attempts to resolve this:
1. introducing pause_process instead of SIGSTOP, which waits for the process
to stop before resuming the test, possibly resolving race conditions in some tests,
this was a suspect since there was one test that could result in an infinite loop in that
case, in practice this didn't help, but still a good idea to keep.
2. disable the `save` config in many tests that don't need it, specifically ones that use
heavy writes and could create large files.
3. change the `populate` proc to use short pipeline rather than an infinite one.
4. use `--clients 1` in the macos CI so that we don't risk running multiple resource
demanding tests in parallel.
5. enable `--verbose` to be repeated to elevate verbosity and print more info to stdout
when a test or a server starts.
We do have ZREMRANGEBYLEX tests, but it is a stress test
marked with slow tag and then skipped in reply-schemas daily.
In the past, we were able to succeed on a daily, i guess
it was because there were some random command executions,
such as corrupt-dump-fuzzy, which might call it.
These test examples are taken from ZRANGEBYLEX basics test.
Add `RM_RdbLoad()` and `RM_RdbSave()` to load/save RDB files from the module API.
In our use case, we have our clustering implementation as a module. As part of this
implementation, the module needs to trigger RDB save operation at specific points.
Also, this module delivers RDB files to other nodes (not using Redis' replication).
When a node receives an RDB file, it should be able to load the RDB. Currently,
there is no module API to save/load RDB files.
This PR adds four new APIs:
```c
RedisModuleRdbStream *RM_RdbStreamCreateFromFile(const char *filename);
void RM_RdbStreamFree(RedisModuleRdbStream *stream);
int RM_RdbLoad(RedisModuleCtx *ctx, RedisModuleRdbStream *stream, int flags);
int RM_RdbSave(RedisModuleCtx *ctx, RedisModuleRdbStream *stream, int flags);
```
The first step is to create a `RedisModuleRdbStream` object. This PR provides a function to
create RedisModuleRdbStream from the filename. (You can load/save RDB with the filename).
In the future, this API can be extended if needed:
e.g., `RM_RdbStreamCreateFromFd()`, `RM_RdbStreamCreateFromSocket()` to save/load
RDB from an `fd` or a `socket`.
Usage:
```c
/* Save RDB */
RedisModuleRdbStream *stream = RedisModule_RdbStreamCreateFromFile("example.rdb");
RedisModule_RdbSave(ctx, stream, 0);
RedisModule_RdbStreamFree(stream);
/* Load RDB */
RedisModuleRdbStream *stream = RedisModule_RdbStreamCreateFromFile("example.rdb");
RedisModule_RdbLoad(ctx, stream, 0);
RedisModule_RdbStreamFree(stream);
```
The existing logic for killing pub-sub clients did not handle the `allchannels`
permission correctly. For example, if you:
ACL SETUSER foo allchannels
Have a client authenticate as the user `foo` and subscribe to a channel, and then:
ACL SETUSER foo resetchannels
The subscribed client would not be disconnected, though new clients under that user
would be blocked from subscribing to any channels.
This was caused by an incomplete optimization in `ACLKillPubsubClientsIfNeeded`
checking whether the new channel permissions were a strict superset of the old ones.
This PR fix several unrelated bugs that were discovered by the same set of tests
(WAITAOF tests in #11713), could make the `WAITAOF` test hang.
The change in `backgroundRewriteDoneHandler` is about MP-AOF.
That leftover / old code assumes that we started a new AOF file just now
(when we have a new base into which we're gonna incrementally write), but
the fact is that with MP-AOF, the fork done handler doesn't really affect the
incremental file being maintained by the parent process, there's no reason to
re-issue `SELECT`, and no reason to update any of the fsync variables in that flow.
This should have been deleted with MP-AOF (introduced in #9788, 7.0).
The damage is that the update to `aof_fsync_offset` will cause us to miss an fsync
in `flushAppendOnlyFile`, that happens if we stop write commands in `AOF_FSYNC_EVERYSEC`
while an AOFRW is in progress. This caused a new `WAITAOF` test to sometime hang forever.
Also because of MP-AOF, we needed to change `aof_fsync_offset` to `aof_last_incr_fsync_offset`
and match it to `aof_last_incr_size` in `flushAppendOnlyFile`. This is because in the past we compared
`aof_fsync_offset` and `aof_current_size`, but with MP-AOF it could be the total AOF file will be
smaller after AOFRW, and the (already existing) incr file still has data that needs to be fsynced.
The change in `flushAppendOnlyFile`, about the `AOF_FSYNC_ALWAYS`, it is follow #6053
(the details is in #5985), we also check `AOF_FSYNC_ALWAYS` to handle a case where
appendfsync is changed from everysec to always while there is data that's written but not yet fsynced.
Since we remove the COMMAND COUNT call in sentinel test in #11950,
reply-schemas-validator started reporting this error:
```
WARNING! The following commands were not hit at all:
command|count
ERROR! at least one command was not hit by the tests
```
This PR add a COMMAND COUNT test to cover it and also fix some
typos in req-res-log-validator.py
This PR allows clients to send information about the client library to redis
to be displayed in CLIENT LIST and CLIENT INFO.
Currently supports:
`CLIENT [lib-name | lib-ver] <value>`
Client libraries are expected to pipeline these right after AUTH, and ignore
the failure in case they're talking to an older version of redis.
These will be shown in CLIENT LIST and CLIENT INFO as:
* `lib-name` - meant to hold the client library name.
* `lib-ver` - meant to hold the client library version.
The values cannot contain spaces, newlines and any wild ASCII characters,
but all other normal chars are accepted, e.g `.`, `=` etc (same as CLIENT NAME).
The RESET command does NOT clear these, but they can be cleared to the
default by sending a command with a blank string.
Co-authored-by: Oran Agra <oran@redislabs.com>
This allows modules to register commands to existing ACL categories and blocks the creation of [sub]commands, datatypes and registering the configs outside of the OnLoad function.
For allowing modules to register commands to existing ACL categories,
This PR implements a new API int RM_SetCommandACLCategories() which takes a pointer to a RedisModuleCommand and a C string aclflags containing the set of space separated ACL categories.
Example, 'write slow' marks the command as part of the write and slow ACL categories.
The C string aclflags is tokenized by implementing a helper function categoryFlagsFromString(). Theses tokens are matched and the corresponding ACL categories flags are set by a helper function matchAclCategoriesFlags. The helper function categoryFlagsFromString() returns the corresponding categories_flags or returns -1 if some token not processed correctly.
If the module contains commands which are registered to existing ACL categories, the number of [sub]commands are tracked by num_commands_with_acl_categories in struct RedisModule. Further, the allowed command bit-map of the existing users are recomputed from the command_rules list, by implementing a function called ACLRecomputeCommandBitsFromCommandRulesAllUsers() for the existing users to have access to the module commands on runtime.
## Breaking change
This change requires that registering commands and subcommands only occur during a modules "OnLoad" function, in order to allow efficient recompilation of ACL bits. We also chose to block registering configs and types, since we believe it's only valid for those to be created during onLoad. We check for this onload flag in struct RedisModule to check if the call is made from the OnLoad function.
Co-authored-by: Madelyn Olson <madelyneolson@gmail.com>
I saw this error once, in the FreeBSD Daily CI:
```
*** [err]: Temp rdb will be deleted if we use bg_unlink when shutdown in tests/unit/shutdown.tcl
Expected [file exists /xxx/temp-10336.rdb] (context: type eval line 15 cmd {assert {[file exists $temp_rdb]}} proc ::test)
```
The log shows that bgsave was executed, and it was successfully executed in the end:
```
Starting test Temp rdb will be deleted if we use bg_unlink when shutdown in tests/unit/shutdown.tcl
10251:M 22 Feb 2023 11:37:25.441 * Background saving started by pid 10336
10336:C 22 Feb 2023 11:37:27.949 * DB saved on disk
10336:C 22 Feb 2023 11:37:27.949 * Fork CoW for RDB: current 0 MB, peak 0 MB, average 0 MB
10251:M 22 Feb 2023 11:37:28.060 * Background saving terminated with success
```
There may be two reasons:
1. The child process has been created, but it has not created
the temp rdb file yet, so [file exists $temp_rdb] check failed.
2. The child process bgsave has been executed successfully and the
temp file has been deleted, so [file exists $temp_rdb] check failed.
From the logs pint, it should be the case 2, case 1 is too extreme,
set rdb-key-save-delay to a higher value to ensure bgsave does not
succeed early to avoid this case.
Previously we would run the module command filters even upon blocked
command reprocessing. This could modify the command, and it's args.
This is irrelevant in the context of a command being reprocessed (it already
went through the filters), as well as breaks the crashed command lookup
that exists in the case of a reprocessed command.
fixes#11894.
Co-authored-by: Oran Agra <oran@redislabs.com>
Allow running blocking commands from within a module using `RM_Call`.
Today, when `RM_Call` is used, the fake client that is used to run command
is marked with `CLIENT_DENY_BLOCKING` flag. This flag tells the command
that it is not allowed to block the client and in case it needs to block, it must
fallback to some alternative (either return error or perform some default behavior).
For example, `BLPOP` fallback to simple `LPOP` if it is not allowed to block.
All the commands must respect the `CLIENT_DENY_BLOCKING` flag (including
module commands). When the command invocation finished, Redis asserts that
the client was not blocked.
This PR introduces the ability to call blocking command using `RM_Call` by
passing a callback that will be called when the client will get unblocked.
In order to do that, the user must explicitly say that he allow to perform blocking
command by passing a new format specifier argument, `K`, to the `RM_Call`
function. This new flag will tell Redis that it is allow to run blocking command
and block the client. In case the command got blocked, Redis will return a new
type of call reply (`REDISMODULE_REPLY_PROMISE`). This call reply indicates
that the command got blocked and the user can set the on_unblocked handler using
`RM_CallReplyPromiseSetUnblockHandler`.
When clients gets unblocked, it eventually reaches `processUnblockedClients` function.
This is where we check if the client is a fake module client and if it is, we call the unblock
callback instead of performing the usual unblock operations.
**Notice**: `RM_CallReplyPromiseSetUnblockHandler` must be called atomically
along side the command invocation (without releasing the Redis lock in between).
In addition, unlike other CallReply types, the promise call reply must be released
by the module when the Redis GIL is acquired.
The module can abort the execution on the blocking command (if it was not yet
executed) using `RM_CallReplyPromiseAbort`. the API will return `REDISMODULE_OK`
on success and `REDISMODULE_ERR` if the operation is already executed.
**Notice** that in case of misbehave module, Abort might finished successfully but the
operation will not really be aborted. This can only happened if the module do not respect
the disconnect callback of the blocked client.
For pure Redis commands this can not happened.
### Atomicity Guarantees
The API promise that the unblock handler will run atomically as an execution unit.
This means that all the operation performed on the unblock handler will be wrapped
with a multi exec transaction when replicated to the replica and AOF.
The API **do not** grantee any other atomicity properties such as when the unblock
handler will be called. This gives us the flexibility to strengthen the grantees (or not)
in the future if we will decide that we need a better guarantees.
That said, the implementation **does** provide a better guarantees when performing
pure Redis blocking command like `BLPOP`. In this case the unblock handler will run
atomically with the operation that got unblocked (for example, in case of `BLPOP`, the
unblock handler will run atomically with the `LPOP` operation that run when the command
got unblocked). This is an implementation detail that might be change in the future and the
module writer should not count on that.
### Calling blocking commands while running on script mode (`S`)
`RM_Call` script mode (`S`) was introduced on #0372. It is used for usecases where the
command that was invoked on `RM_Call` comes from a user input and we want to make
sure the user will not run dangerous commands like `shutdown`. Some command, such
as `BLPOP`, are marked with `NO_SCRIPT` flag, which means they will not be allowed on
script mode. Those commands are marked with `NO_SCRIPT` just because they are
blocking commands and not because they are dangerous. Now that we can run blocking
commands on RM_Call, there is no real reason not to allow such commands on script mode.
The underline problem is that the `NO_SCRIPT` flag is abused to also mark some of the
blocking commands (notice that those commands know not to block the client if it is not
allowed to do so, and have a fallback logic to such cases. So even if those commands
were not marked with `NO_SCRIPT` flag, it would not harm Redis, and today we can
already run those commands within multi exec).
In addition, not all blocking commands are marked with `NO_SCRIPT` flag, for example
`blmpop` are not marked and can run from within a script.
Those facts shows that there are some ambiguity about the meaning of the `NO_SCRIPT`
flag, and its not fully clear where it should be use.
The PR suggest that blocking commands should not be marked with `NO_SCRIPT` flag,
those commands should handle `CLIENT_DENY_BLOCKING` flag and only block when
it's safe (like they already does today). To achieve that, the PR removes the `NO_SCRIPT`
flag from the following commands:
* `blmove`
* `blpop`
* `brpop`
* `brpoplpush`
* `bzpopmax`
* `bzpopmin`
* `wait`
This might be considered a breaking change as now, on scripts, instead of getting
`command is not allowed from script` error, the user will get some fallback behavior
base on the command implementation. That said, the change matches the behavior
of scripts and multi exec with respect to those commands and allow running them on
`RM_Call` even when script mode is used.
### Additional RedisModule API and changes
* `RM_BlockClientSetPrivateData` - Set private data on the blocked client without the
need to unblock the client. This allows up to set the promise CallReply as the private
data of the blocked client and abort it if the client gets disconnected.
* `RM_BlockClientGetPrivateData` - Return the current private data set on a blocked client.
We need it so we will have access to this private data on the disconnect callback.
* On RM_Call, the returned reply will be added to the auto memory context only if auto
memory is enabled, this allows us to keep the call reply for longer time then the context
lifetime and does not force an unneeded borrow relationship between the CallReply and
the RedisModuleContext.
This change adds new module callbacks that can override the default password based authentication associated with ACLs. With this, Modules can register auth callbacks through which they can implement their own Authentication logic. When `AUTH` and `HELLO AUTH ...` commands are used, Module based authentication is attempted and then normal password based authentication is attempted if needed.
The new Module APIs added in this PR are - `RM_RegisterCustomAuthCallback` and `RM_BlockClientOnAuth` and `RedisModule_ACLAddLogEntryByUserName `.
Module based authentication will be attempted for all Redis users (created through the ACL SETUSER cmd or through Module APIs) even if the Redis user does not exist at the time of the command. This gives a chance for the Module to create the RedisModule user and then authenticate via the RedisModule API - from the custom auth callback.
For the AUTH command, we will support both variations - `AUTH <username> <password>` and `AUTH <password>`. In case of the `AUTH <password>` variation, the custom auth callbacks are triggered with “default” as the username and password as what is provided.
### RedisModule_RegisterCustomAuthCallback
```
void RM_RegisterCustomAuthCallback(RedisModuleCtx *ctx, RedisModuleCustomAuthCallback cb) {
```
This API registers a callback to execute to prior to normal password based authentication. Multiple callbacks can be registered across different modules. These callbacks are responsible for either handling the authentication, each authenticating the user or explicitly denying, or deferring it to other authentication mechanisms. Callbacks are triggered in the order they were registered. When a Module is unloaded, all the auth callbacks registered by it are unregistered. The callbacks are attempted, in the order of most recently registered callbacks, when the AUTH/HELLO (with AUTH field is provided) commands are called. The callbacks will be called with a module context along with a username and a password, and are expected to take one of the following actions:
(1) Authenticate - Use the RM_Authenticate* API successfully and return `REDISMODULE_AUTH_HANDLED`. This will immediately end the auth chain as successful and add the OK reply.
(2) Block a client on authentication - Use the `RM_BlockClientOnAuth` API and return `REDISMODULE_AUTH_HANDLED`. Here, the client will be blocked until the `RM_UnblockClient `API is used which will trigger the auth reply callback (provided earlier through the `RM_BlockClientOnAuth`). In this reply callback, the Module should authenticate, deny or skip handling authentication.
(3) Deny Authentication - Return `REDISMODULE_AUTH_HANDLED` without authenticating or blocking the client. Optionally, `err` can be set to a custom error message. This will immediately end the auth chain as unsuccessful and add the ERR reply.
(4) Skip handling Authentication - Return `REDISMODULE_AUTH_NOT_HANDLED` without blocking the client. This will allow the engine to attempt the next custom auth callback.
If none of the callbacks authenticate or deny auth, then password based auth is attempted and will authenticate or add failure logs and reply to the clients accordingly.
### RedisModule_BlockClientOnAuth
```
RedisModuleBlockedClient *RM_BlockClientOnAuth(RedisModuleCtx *ctx, RedisModuleCustomAuthCallback reply_callback,
void (*free_privdata)(RedisModuleCtx*,void*))
```
This API can only be used from a Module from the custom auth callback. If a client is not in the middle of custom module based authentication, ERROR is returned. Otherwise, the client is blocked and the `RedisModule_BlockedClient` is returned similar to the `RedisModule_BlockClient` API.
### RedisModule_ACLAddLogEntryByUserName
```
int RM_ACLAddLogEntryByUserName(RedisModuleCtx *ctx, RedisModuleString *username, RedisModuleString *object, RedisModuleACLLogEntryReason reason)
```
Adds a new entry in the ACL log with the `username` RedisModuleString provided. This simplifies the Module usage because now, developers do not need to create a Module User just to add an error ACL Log entry. Aside from accepting username (RedisModuleString) instead of a RedisModuleUser, it is the same as the existing `RedisModule_ACLAddLogEntry` API.
### Breaking changes
- HELLO command - Clients can now only set the client name and RESP protocol from the `HELLO` command if they are authenticated. Also, we now finish command arg validation first and return early with a ERR reply if any arg is invalid. This is to avoid mutating the client name / RESP from a command that would have failed on invalid arguments.
### Notable behaviors
- Module unblocking - Now, we will not allow Modules to block the client from inside the context of a reply callback (triggered from the Module unblock flow `moduleHandleBlockedClients`).
---------
Co-authored-by: Madelyn Olson <34459052+madolson@users.noreply.github.com>
There be a situation that satisfies WAIT, and then wrongly unblock
WAITAOF because we mix-use last_offset and last_numreplicas.
We update last_offset and last_numreplicas only when the condition
matches. i.e. output of either replicationCountAOFAcksByOffset or
replicationCountAcksByOffset is right.
In this case, we need to have separate last_ variables for each of
them. Added a last_aof_offset and last_aof_numreplicas for WAITAOF.
WAITAOF was added in #11713. Found while coding #11917.
A Test was added to validate that case.
WAITAOF wad added in #11713, its return is an array.
But forget to handle WAITAOF in last_offset and last_numreplicas,
causing WAITAOF to return a WAIT like reply.
Tests was added to validate that case (both WAIT and WAITAOF).
This PR also refactored processClientsWaitingReplicas a bit for better
maintainability and readability.
Implementing the WAITAOF functionality which would allow the user to
block until a specified number of Redises have fsynced all previous write
commands to the AOF.
Syntax: `WAITAOF <num_local> <num_replicas> <timeout>`
Response: Array containing two elements: num_local, num_replicas
num_local is always either 0 or 1 representing the local AOF on the master.
num_replicas is the number of replicas that acknowledged the a replication
offset of the last write being fsynced to the AOF.
Returns an error when called on replicas, or when called with non-zero
num_local on a master with AOF disabled, in all other cases the response
just contains number of fsync copies.
Main changes:
* Added code to keep track of replication offsets that are confirmed to have
been fsynced to disk.
* Keep advancing master_repl_offset even when replication is disabled (and
there's no replication backlog, only if there's an AOF enabled).
This way we can use this command and it's mechanisms even when replication
is disabled.
* Extend REPLCONF ACK to `REPLCONF ACK <ofs> FACK <ofs>`, the FACK
will be appended only if there's an AOF on the replica, and already ignored on
old masters (thus backwards compatible)
* WAIT now no longer wait for the replication offset after your last command, but
rather the replication offset after your last write (or read command that caused
propagation, e.g. lazy expiry).
Unrelated changes:
* WAIT command respects CLIENT_DENY_BLOCKING (not just CLIENT_MULTI)
Implementation details:
* Add an atomic var named `fsynced_reploff_pending` that's updated
(usually by the bio thread) and later copied to the main `fsynced_reploff`
variable (only if the AOF base file exists).
I.e. during the initial AOF rewrite it will not be used as the fsynced offset
since the AOF base is still missing.
* Replace close+fsync bio job with new BIO_CLOSE_AOF (AOF specific)
job that will also update fsync offset the field.
* Handle all AOF jobs (BIO_CLOSE_AOF, BIO_AOF_FSYNC) in the same bio
worker thread, to impose ordering on their execution. This solves a
race condition where a job could set `fsynced_reploff_pending` to a higher
value than another pending fsync job, resulting in indicating an offset
for which parts of the data have not yet actually been fsynced.
Imposing an ordering on the jobs guarantees that fsync jobs are executed
in increasing order of replication offset.
* Drain bio jobs when switching `appendfsync` to "always"
This should prevent a write race between updates to `fsynced_reploff_pending`
in the main thread (`flushAppendOnlyFile` when set to ALWAYS fsync), and
those done in the bio thread.
* Drain the pending fsync when starting over a new AOF to avoid race conditions
with the previous AOF offsets overriding the new one (e.g. after switching to
replicate from a new master).
* Make sure to update the fsynced offset at the end of the initial AOF rewrite.
a must in case there are no additional writes that trigger a periodic fsync,
specifically for a replica that does a full sync.
Limitations:
It is possible to write a module and a Lua script that propagate to the AOF and doesn't
propagate to the replication stream. see REDISMODULE_ARGV_NO_REPLICAS and luaRedisSetReplCommand.
These features are incompatible with the WAITAOF command, and can result
in two bad cases. The scenario is that the user executes command that only
propagates to AOF, and then immediately
issues a WAITAOF, and there's no further writes on the replication stream after that.
1. if the the last thing that happened on the replication stream is a PING
(which increased the replication offset but won't trigger an fsync on the replica),
then the client would hang forever (will wait for an fack that the replica will never
send sine it doesn't trigger any fsyncs).
2. if the last thing that happened is a write command that got propagated properly,
then WAITAOF will be released immediately, without waiting for an fsync (since
the offset didn't change)
Refactoring:
* Plumbing to allow bio worker to handle multiple job types
This introduces infrastructure necessary to allow BIO workers to
not have a 1-1 mapping of worker to job-type. This allows in the
future to assign multiple job types to a single worker, either as
a performance/resource optimization, or as a way of enforcing
ordering between specific classes of jobs.
Co-authored-by: Oran Agra <oran@redislabs.com>
This bug seems to be there forever, CLIENT REPLY OFF|SKIP will
mark the client with CLIENT_REPLY_OFF or CLIENT_REPLY_SKIP flags.
With these flags, prepareClientToWrite called by addReply* will
return C_ERR directly. So the client can't receive the Pub/Sub
messages and any other push notifications, e.g client side tracking.
In this PR, we adding a CLIENT_PUSHING flag, disables the reply
silencing flags. When adding push replies, set the flag, after the reply,
clear the flag. Then add the flag check in prepareClientToWrite.
Fixes#11874
Note, the SUBSCRIBE command response is a bit awkward,
see https://github.com/redis/redis-doc/pull/2327
Co-authored-by: Oran Agra <oran@redislabs.com>
Work in progress towards implementing a reply schema as part of COMMAND DOCS, see #9845
Since ironing the details of the reply schema of each and every command can take a long time, we
would like to merge this PR when the infrastructure is ready, and let this mature in the unstable branch.
Meanwhile the changes of this PR are internal, they are part of the repo, but do not affect the produced build.
### Background
In #9656 we add a lot of information about Redis commands, but we are missing information about the replies
### Motivation
1. Documentation. This is the primary goal.
2. It should be possible, based on the output of COMMAND, to be able to generate client code in typed
languages. In order to do that, we need Redis to tell us, in detail, what each reply looks like.
3. We would like to build a fuzzer that verifies the reply structure (for now we use the existing
testsuite, see the "Testing" section)
### Schema
The idea is to supply some sort of schema for the various replies of each command.
The schema will describe the conceptual structure of the reply (for generated clients), as defined in RESP3.
Note that the reply structure itself may change, depending on the arguments (e.g. `XINFO STREAM`, with
and without the `FULL` modifier)
We decided to use the standard json-schema (see https://json-schema.org/) as the reply-schema.
Example for `BZPOPMIN`:
```
"reply_schema": {
"oneOf": [
{
"description": "Timeout reached and no elements were popped.",
"type": "null"
},
{
"description": "The keyname, popped member, and its score.",
"type": "array",
"minItems": 3,
"maxItems": 3,
"items": [
{
"description": "Keyname",
"type": "string"
},
{
"description": "Member",
"type": "string"
},
{
"description": "Score",
"type": "number"
}
]
}
]
}
```
#### Notes
1. It is ok that some commands' reply structure depends on the arguments and it's the caller's responsibility
to know which is the relevant one. this comes after looking at other request-reply systems like OpenAPI,
where the reply schema can also be oneOf and the caller is responsible to know which schema is the relevant one.
2. The reply schemas will describe RESP3 replies only. even though RESP3 is structured, we want to use reply
schema for documentation (and possibly to create a fuzzer that validates the replies)
3. For documentation, the description field will include an explanation of the scenario in which the reply is sent,
including any relation to arguments. for example, for `ZRANGE`'s two schemas we will need to state that one
is with `WITHSCORES` and the other is without.
4. For documentation, there will be another optional field "notes" in which we will add a short description of
the representation in RESP2, in case it's not trivial (RESP3's `ZRANGE`'s nested array vs. RESP2's flat
array, for example)
Given the above:
1. We can generate the "return" section of all commands in [redis-doc](https://redis.io/commands/)
(given that "description" and "notes" are comprehensive enough)
2. We can generate a client in a strongly typed language (but the return type could be a conceptual
`union` and the caller needs to know which schema is relevant). see the section below for RESP2 support.
3. We can create a fuzzer for RESP3.
### Limitations (because we are using the standard json-schema)
The problem is that Redis' replies are more diverse than what the json format allows. This means that,
when we convert the reply to a json (in order to validate the schema against it), we lose information (see
the "Testing" section below).
The other option would have been to extend the standard json-schema (and json format) to include stuff
like sets, bulk-strings, error-string, etc. but that would mean also extending the schema-validator - and that
seemed like too much work, so we decided to compromise.
Examples:
1. We cannot tell the difference between an "array" and a "set"
2. We cannot tell the difference between simple-string and bulk-string
3. we cannot verify true uniqueness of items in commands like ZRANGE: json-schema doesn't cover the
case of two identical members with different scores (e.g. `[["m1",6],["m1",7]]`) because `uniqueItems`
compares (member,score) tuples and not just the member name.
### Testing
This commit includes some changes inside Redis in order to verify the schemas (existing and future ones)
are indeed correct (i.e. describe the actual response of Redis).
To do that, we added a debugging feature to Redis that causes it to produce a log of all the commands
it executed and their replies.
For that, Redis needs to be compiled with `-DLOG_REQ_RES` and run with
`--reg-res-logfile <file> --client-default-resp 3` (the testsuite already does that if you run it with
`--log-req-res --force-resp3`)
You should run the testsuite with the above args (and `--dont-clean`) in order to make Redis generate
`.reqres` files (same dir as the `stdout` files) which contain request-response pairs.
These files are later on processed by `./utils/req-res-log-validator.py` which does:
1. Goes over req-res files, generated by redis-servers, spawned by the testsuite (see logreqres.c)
2. For each request-response pair, it validates the response against the request's reply_schema
(obtained from the extended COMMAND DOCS)
5. In order to get good coverage of the Redis commands, and all their different replies, we chose to use
the existing redis test suite, rather than attempt to write a fuzzer.
#### Notes about RESP2
1. We will not be able to use the testing tool to verify RESP2 replies (we are ok with that, it's time to
accept RESP3 as the future RESP)
2. Since the majority of the test suite is using RESP2, and we want the server to reply with RESP3
so that we can validate it, we will need to know how to convert the actual reply to the one expected.
- number and boolean are always strings in RESP2 so the conversion is easy
- objects (maps) are always a flat array in RESP2
- others (nested array in RESP3's `ZRANGE` and others) will need some special per-command
handling (so the client will not be totally auto-generated)
Example for ZRANGE:
```
"reply_schema": {
"anyOf": [
{
"description": "A list of member elements",
"type": "array",
"uniqueItems": true,
"items": {
"type": "string"
}
},
{
"description": "Members and their scores. Returned in case `WITHSCORES` was used.",
"notes": "In RESP2 this is returned as a flat array",
"type": "array",
"uniqueItems": true,
"items": {
"type": "array",
"minItems": 2,
"maxItems": 2,
"items": [
{
"description": "Member",
"type": "string"
},
{
"description": "Score",
"type": "number"
}
]
}
}
]
}
```
### Other changes
1. Some tests that behave differently depending on the RESP are now being tested for both RESP,
regardless of the special log-req-res mode ("Pub/Sub PING" for example)
2. Update the history field of CLIENT LIST
3. Added basic tests for commands that were not covered at all by the testsuite
### TODO
- [x] (maybe a different PR) add a "condition" field to anyOf/oneOf schemas that refers to args. e.g.
when `SET` return NULL, the condition is `arguments.get||arguments.condition`, for `OK` the condition
is `!arguments.get`, and for `string` the condition is `arguments.get` - https://github.com/redis/redis/issues/11896
- [x] (maybe a different PR) also run `runtest-cluster` in the req-res logging mode
- [x] add the new tests to GH actions (i.e. compile with `-DLOG_REQ_RES`, run the tests, and run the validator)
- [x] (maybe a different PR) figure out a way to warn about (sub)schemas that are uncovered by the output
of the tests - https://github.com/redis/redis/issues/11897
- [x] (probably a separate PR) add all missing schemas
- [x] check why "SDOWN is triggered by misconfigured instance replying with errors" fails with --log-req-res
- [x] move the response transformers to their own file (run both regular, cluster, and sentinel tests - need to
fight with the tcl including mechanism a bit)
- [x] issue: module API - https://github.com/redis/redis/issues/11898
- [x] (probably a separate PR): improve schemas: add `required` to `object`s - https://github.com/redis/redis/issues/11899
Co-authored-by: Ozan Tezcan <ozantezcan@gmail.com>
Co-authored-by: Hanna Fadida <hanna.fadida@redislabs.com>
Co-authored-by: Oran Agra <oran@redislabs.com>
Co-authored-by: Shaya Potter <shaya@redislabs.com>
This PR has two parts:
1. Fix flaky test case, the previous tests set a lot of volatile keys,
it injects an unexpected DEL command into the replication stream during
the later test, causing it to fail. Add a flushall to avoid it.
2. Improve assert_replication_stream, now it can print the whole stream
rather than just the failing line.
Currently (starting at #11012) When a module is blocked on keys it sets the
CLIENT_PENDING_COMMAND flag.
However in case the module decides to unblock the client not via the regular flow
(eg timeout, key signal or CLIENT UNBLOCK command) it will attempt to reprocess the
module command and potentially blocked again.
This fix remove the CLIENT_PENDING_COMMAND flag in case blockedForKeys is
issued from module context.
I've seen it fail here (test-centos7-tls-module-no-tls and test-freebsd):
```
*** [err]: Operations in no-touch mode do not alter the last access time of a key in tests/unit/introspection-2.tcl
Expected '244296' to be more than '244296' (context: type eval line 12 cmd {assert_morethan $newlru $oldlru} proc ::test)
```
Our LRU_CLOCK_RESOLUTION value is 1000ms, and default hz is 10, so if the
test is really fast, or the timing is just right, newlru will be the same
as oldlru. We fixed this by changing `after 1000` to `after 1100`.
Test `trim on SET with big value` (introduced from #11817) fails under mac m1 with libc mem_allocator.
The reason is that malloc(33000) will allocate 65536 bytes(>42000).
This test still passes under ubuntu with libc mem_allocator.
```
*** [err]: trim on SET with big value in tests/unit/type/string.tcl
Expected [r memory usage key] < 42000 (context: type source line 471 file /Users/iospack/data/redis_fork/tests/unit/type/string.tcl cmd {assert {[r memory usage key] < 42000}} proc ::test)
```
simple test under mac m1 with libc mem_allocator:
```c
void *p = zmalloc(33000);
printf("malloc size: %zu\n", zmalloc_size(p));
# output
malloc size: 65536
```
This test is very sensitive and fragile. It often fails in Daily,
in most cases, it failed in test-ubuntu-32bit (the AOF loading one),
with the range in (31, 40):
```
[err]: Active defrag in tests/unit/memefficiency.tcl
Expected 38 <= 30 (context: type eval line 113 cmd {assert {$max_latency <= 30}} proc ::test)
```
The AOF loading part isn't tightly fixed to the cron hz. It calls
processEventsWhileBlocked once in every 1024 command calls.
```
/* Serve the clients from time to time */
if (!(loops++ % 1024)) {
off_t progress_delta = ftello(fp) - last_progress_report_size;
loadingIncrProgress(progress_delta);
last_progress_report_size += progress_delta;
processEventsWhileBlocked();
processModuleLoadingProgressEvent(1);
}
```
In this case, we can either decrease the 1024 or increase the
threshold of just the AOF part of that test. Considering the test
machines are sometimes slow, and all sort of quirks could happen
(which do not indicate a bug), and we've already set to 30, we suppose
we can set it a little bit higher, set it to 40. We can have this instead of
adding another testing config (we can add it when we really need it).
Fixes#11868
As `sdsRemoveFreeSpace` have an impact on performance even if it is a no-op (see details at #11508).
Only call the function when there is a possibility that the string contains free space.
* For strings coming from the network, it's only if they're bigger than PROTO_MBULK_BIG_ARG
* For strings coming from scripts, it's only if they're smaller than LUA_CMD_OBJCACHE_MAX_LEN
* For strings coming from modules, it could be anything.
Co-authored-by: Oran Agra <oran@redislabs.com>
Co-authored-by: sundb <sundbcn@gmail.com>
Authenticated users can use string matching commands with a
specially crafted pattern to trigger a denial-of-service attack on Redis,
causing it to hang and consume 100% CPU time.
Co-authored-by: Tom Levy <tomlevy93@gmail.com>
Avoid calling unwatchAllKeys when running touchAllWatchedKeysInDb (which was unnecessary)
This can potentially lead to use-after-free and memory corruption when the next entry
pointer held by the watched keys iterator is freed when unwatching all keys of a specific client.
found with address sanitizer, added a test which will not always fail (depending on the random
dict hashing seed)
problem introduced in #9829 (Reids 7.0)
Co-authored-by: Oran Agra <oran@redislabs.com>
The test sporadically failed with valgrind trying to match
`no client named obuf-client1 found*`
in the log it looks like `obuf-client1` was indeed dropped,
so i'm guessing it's because CLIENT LIST was processed first.
When no-touch mode is enabled, the client will not touch LRU/LFU of the
keys it accesses, except when executing command `TOUCH`.
This allows inspecting or modifying the key-space without affecting their eviction.
Changes:
- A command `CLIENT NO-TOUCH ON|OFF` to switch on and off this mode.
- A client flag `#define CLIENT_NOTOUCH (1ULL<<45)`, which can be shown
with `CLIENT INFO`, by the letter "T" in the "flags" field.
- Clear `NO-TOUCH` flag in `clearClientConnectionState`, which is used by `RESET`
command and resetting temp clients used by modules.
- Also clear `NO-EVICT` flag in `clearClientConnectionState`, this might have been an
oversight, spotted by @madolson.
- A test using `DEBUG OBJECT` command to verify that LRU stat is not touched when
no-touch mode is on.
Co-authored-by: chentianjie <chentianjie@alibaba-inc.com>
Co-authored-by: Madelyn Olson <34459052+madolson@users.noreply.github.com>
Co-authored-by: sundb <sundbcn@gmail.com>
We noticed that `client evicted due to client tracking prefixes`
takes over 200 seconds with valgrind.
We combine three prefixes in each command, this will probably
save us half the testing time.
Before: normal: 3508ms, valgrind: 289503ms -> 290s
With three prefixes, normal: 1500ms, valgrind: 135742ms -> 136s
Since we did not actually count the memory usage of all prefixes, see
getClientMemoryUsage, so we can not use larger prefixes to speed up the
test here. Also this PR cleaned up some spaces (IDE jobs) and typos.
There is a built in limit to client side tracking keys, which when exceeded will invalidate keys. This occurs in two places, one in the server cron and other before executing a command. If it happens in the second scenario, the invalidations will be queued for later since current client is set. This queue is never drained if a command is not executed (through call) such as a multi-exec command getting queued. This results in a later server assert crashing.
This test case is to cover a edge scenario: when a writable replica enabled AOF
at the same time, active expiry keys which was created in writable replicas should
propagate to the AOF file, and some versions might crash (fixed by #11615).
For details, please refer to #11778
* Make it clear that current_client is the root client that was called by
external connection
* add executing_client which is the client that runs the current command
(can be a module or a script)
* Remove script_caller that was used for commands that have CLIENT_SCRIPT
to get the client that called the script. in most cases, that's the current_client,
and in others (when being called from a module), it could be an intermediate
client when we actually want the original one used by the external connection.
bugfixes:
* RM_Call with C flag should log ACL errors with the requested user rather than
the one used by the original client, this also solves a crash when RM_Call is used
with C flag from a detached thread safe context.
* addACLLogEntry would have logged info about the script_caller, but in case the
script was issued by a module command we actually want the current_client. the
exception is when RM_Call is called from a timer event, in which case we don't
have a current_client.
behavior changes:
* client side tracking for scripts now tracks the keys that are read by the script
instead of the keys that are declared by the caller for EVAL
other changes:
* Log both current_client and executing_client in the crash log.
* remove prepareLuaClient and resetLuaClient, being dead code that was forgotten.
* remove scriptTimeSnapshot and snapshot_time and instead add cmd_time_snapshot
that serves all commands and is reset only when execution nesting starts.
* remove code to propagate CLIENT_FORCE_REPL from the executed command
to the script caller since scripts aren't propagated anyway these days and anyway
this flag wouldn't have had an effect since CLIENT_PREVENT_PROP is added by scriptResetRun.
* fix a module GIL violation issue in afterSleep that was introduced in #10300 (unreleased)
In #9373, actually need to replace `$rd $pop blist1{t} blist2{t} 1`
with `bpop_command_two_key $rd $pop blist1{t} blist2{t} 1` but forgot
to delete the latter.
This doesn't affect the test, because the later assert_error "WRONGTYPE"
is expected (and right). And if we read $rd again, it will get the
wrong result, like 'ERR unknown command 'BLMPOP_LEFT' | 'BLMPOP_RIGHT'
All of the POP commands must not decr length below 0.
So, get_fsl will delete the key if the length is 0 (unless
the caller wished to create if doesn't exist)
Other:
1. Use REDISMODULE_WRITE where needed (POP commands)
2. Use wait_for_blokced_clients in test
Unrelated:
Use quotes instead of curly braces in zset.tcl, for variable expansion
Starting from Redis 7.0 (#9890) we started wrapping everything a command
propagates with MULTI/EXEC. The problem is that both SCAN and RANDOMKEY can
lazy-expire arbitrary keys (similar behavior to active-expire), and put DELs in a transaction.
Fix: When these commands are called without a parent exec-unit (e.g. not in EVAL or
MULTI) we avoid wrapping their DELs in a transaction (for the same reasons active-expire
and eviction avoids a transaction)
This PR adds a per-command flag that indicates that the command may touch arbitrary
keys (not the ones in the arguments), and uses that flag to avoid the MULTI-EXEC.
For now, this flag is internal, since we're considering other solutions for the future.
Note for cluster mode: if SCAN/RANDOMKEY is inside EVAL/MULTI it can still cause the
same situation (as it always did), but it won't cause a CROSSSLOT because replicas and AOF
do not perform slot checks.
The problem with the above is mainly for 3rd party ecosystem tools that propagate commands
from master to master, or feed an AOF file with redis-cli into a master.
This PR aims to fix the regression in redis 7.0, and we opened #11792 to try to handle the
bigger problem with lazy expire better for another release.
The PR adds support for the following flags on RedisModule_OpenKey:
* REDISMODULE_OPEN_KEY_NONOTIFY - Don't trigger keyspace event on key misses.
* REDISMODULE_OPEN_KEY_NOSTATS - Don't update keyspace hits/misses counters.
* REDISMODULE_OPEN_KEY_NOEXPIRE - Avoid deleting lazy expired keys.
* REDISMODULE_OPEN_KEY_NOEFFECTS - Avoid any effects from fetching the key
In addition, added `RM_GetOpenKeyModesAll`, which returns the mask of all
supported OpenKey modes. This allows the module to check, in runtime, which
OpenKey modes are supported by the current Redis instance.
Return an error when loadAppendOnlyFiles fails instead of
exiting. DEBUF LOADAOF command is only meant to be used by
the test suite, and only by tests that generated an AOF file
first. So this change is ok (considering that the caller is
likely to catch this error and die).
This actually revert part of the code in #9012, and now
DEBUG LOADAOF behaves the same as DEBUG RELOAD (returns an
error when the load fails).
Plus remove a `after 2000` in a test, which can save times (looks like copy paste error).
There is a timing issue in the new ACL log test:
```
*** [err]: ACL LOG aggregates similar errors together and assigns unique entry-id to new errors in tests/unit/acl.tcl
Expected 1675382873989 < 1675382873989 (context: type eval line 15 cmd {assert {$timestamp_last_update_original < $timestamp_last_updated_after_update}} proc ::test)
```
Looking at the test code, we will check the `timestamp-last-updated` before
and after a new ACL error occurs. Actually `WRONGPASS` errors can be executed
very quickly on fast machines. For example, in the this case, the execution is
completed within one millisecond.
The error is easy to reproduce, if we reduce the number of the for loops, for
example set to 2, and using --loop and --stop. Avoid this timing issue by adding
an `after 1` before the new errors.
The test was introduced in #11477.
Added 3 fields to the ACL LOG - adds entry_id, timestamp_created and timestamp_last_updated, which updates similar existing log error entries. The pair - entry_id, timestamp_created is a unique identifier of this entry, in case the node dies and is restarted, it can detect that if it's a new series.
The primary use case of Unique id is to uniquely identify the error messages and not to detect if the server has restarted.
entry-id is the sequence number of the entry (starting at 0) since the server process started. Can also be used to check if items were "lost" if they fell between periods.
timestamp-created is the unix-time in ms at the time the entry was first created.
timestamp-last-updated is the unix-time in ms at the time the entry was last updated
Time_created gives the absolute time which better accounts for network time as compared to time since. It can also be older than 60 secs and presently there is no field that can display the original time of creation once the error entry is updated.
The reason of timestamp_last_updated field is that it provides a more precise value for the “last time” an error was seen where as, presently it is only in the 60 second period.
Co-authored-by: Madelyn Olson <madelyneolson@gmail.com>
Currently while a sharded pubsub message publish tries to propagate the message across the cluster, a NULL check is missing for clusterLink. clusterLink could be NULL if the link is causing memory beyond the set threshold cluster-link-sendbuf-limit and server terminates the link.
This change introduces two things:
Avoids the engine crashes on the publishing node if a message is tried to be sent to a node and the link is NULL.
Adds a debugging tool CLUSTERLINK KILL to terminate the clusterLink between two nodes.
In #7875 (Redis 6.2), we changed the sds alloc to be the usable allocation
size in order to:
> reduce the need for realloc calls by making the sds implicitly take over
the internal fragmentation
This change was done most sds functions, excluding `sdsRemoveFreeSpace` and
`sdsResize`, the reason is that in some places (e.g. clientsCronResizeQueryBuffer)
we call sdsRemoveFreeSpace when we see excessive free space and want to trim it.
so if we don't trim it exactly to size, the caller may still see excessive free space and
call it again and again.
However, this resulted in some excessive calls to realloc, even when there's no need
and it's gonna be a no-op (e.g. when reducing 15 bytes allocation to 13).
It turns out that a call for realloc with jemalloc can be expensive even if it ends up
doing nothing, so this PR adds a check using `je_nallocx`, which is cheap to avoid
the call for realloc.
in addition to that this PR unifies sdsResize and sdsRemoveFreeSpace into common
code. the difference between them was that sdsResize would avoid using SDS_TYPE_5,
since it want to keep the string ready to be resized again, while sdsRemoveFreeSpace
would permit using SDS_TYPE_5 and get an optimal memory consumption.
now both methods take a `would_regrow` argument that makes it more explicit.
the only actual impact of that is that in clientsCronResizeQueryBuffer we call both sdsResize
and sdsRemoveFreeSpace for in different cases, and we now prevent the use of SDS_TYPE_5 in both.
The new test that was added to cover this concern used to pass before this PR as well,
this PR is just a performance optimization and cleanup.
Benchmark:
`redis-benchmark -c 100 -t set -d 512 -P 10 -n 100000000`
on i7-9850H with jemalloc, shows improvement from 1021k ops/sec to 1067k (average of 3 runs).
some 4.5% improvement.
Co-authored-by: Oran Agra <oran@redislabs.com>
Related to the hang reported in #11671
Currently, redis can disconnect a client due to reaching output buffer limit,
it'll also avoid feeding that output buffer with more data, but it will keep
running the loop in the command (despite the client already being marked for
disconnection)
This PR is an attempt to mitigate the problem, specifically for commands that
are easy to abuse, specifically: KEYS, HRANDFIELD, SRANDMEMBER, ZRANDMEMBER.
The RAND family of commands can take a negative COUNT argument (which is not
bound to the number of elements in the key), so it's enough to create a key
with one field, and then these commands can be used to hang redis.
For KEYS the caller can use the existing keyspace in redis (if big enough).
Authenticated users issuing specially crafted SETRANGE and SORT(_RO)
commands can trigger an integer overflow, resulting with Redis attempting
to allocate impossible amounts of memory and abort with an OOM panic.
Any value in the range of [0-1) turns to 0 when being cast from double to long long. This change rounds up instead of down for values that can't be stored precisely as long doubles.
TLDR: solve a problem introduced in Redis 7.0.6 (#11541) with
RM_CommandFilterArgInsert being called from scripts, which can
lead to memory corruption.
Libc realloc can return the same pointer even if the size was changed. The code in
freeLuaRedisArgv had an assumption that if the pointer didn't change, then the
allocation didn't change, and the cache can still be reused.
However, if rewriteClientCommandArgument or RM_CommandFilterArgInsert were
used, it could be that we realloced the argv array, and the pointer didn't change, then
a consecutive command being executed from Lua can use that argv cache reaching
beyond its size.
This was actually only possible with modules, since the decision to realloc was based
on argc, rather than argv_len.
*TL;DR*
---------------------------------------
Following the discussion over the issue [#7551](https://github.com/redis/redis/issues/7551)
We decided to refactor the client blocking code to eliminate some of the code duplications
and to rebuild the infrastructure better for future key blocking cases.
*In this PR*
---------------------------------------
1. reprocess the command once a client becomes unblocked on key (instead of running
custom code for the unblocked path that's different than the one that would have run if
blocking wasn't needed)
2. eliminate some (now) irrelevant code for handling unblocking lists/zsets/streams etc...
3. modify some tests to intercept the error in cases of error on reprocess after unblock (see
details in the notes section below)
4. replace '$' on the client argv with current stream id. Since once we reprocess the stream
XREAD we need to read from the last msg and not wait for new msg in order to prevent
endless block loop.
5. Added statistics to the info "Clients" section to report the:
* `total_blocking_keys` - number of blocking keys
* `total_blocking_keys_on_nokey` - number of blocking keys which have at least 1 client
which would like
to be unblocked on when the key is deleted.
6. Avoid expiring unblocked key during unblock. Previously we used to lookup the unblocked key
which might have been expired during the lookup. Now we lookup the key using NOTOUCH and
NOEXPIRE to avoid deleting it at this point, so propagating commands in blocked.c is no longer needed.
7. deprecated command flags. We decided to remove the CMD_CALL_STATS and CMD_CALL_SLOWLOG
and make an explicit verification in the call() function in order to decide if stats update should take place.
This should simplify the logic and also mitigate existing issues: for example module calls which are
triggered as part of AOF loading might still report stats even though they are called during AOF loading.
*Behavior changes*
---------------------------------------------------
1. As this implementation prevents writing dedicated code handling unblocked streams/lists/zsets,
since we now re-process the command once the client is unblocked some errors will be reported differently.
The old implementation used to issue
``UNBLOCKED the stream key no longer exists``
in the following cases:
- The stream key has been deleted (ie. calling DEL)
- The stream and group existed but the key type was changed by overriding it (ie. with set command)
- The key not longer exists after we swapdb with a db which does not contains this key
- After swapdb when the new db has this key but with different type.
In the new implementation the reported errors will be the same as if the command was processed after effect:
**NOGROUP** - in case key no longer exists, or **WRONGTYPE** in case the key was overridden with a different type.
2. Reprocessing the command means that some checks will be reevaluated once the
client is unblocked.
For example, ACL rules might change since the command originally was executed and
will fail once the client is unblocked.
Another example is OOM condition checks which might enable the command to run and
block but fail the command reprocess once the client is unblocked.
3. One of the changes in this PR is that no command stats are being updated once the
command is blocked (all stats will be updated once the client is unblocked). This implies
that when we have many clients blocked, users will no longer be able to get that information
from the command stats. However the information can still be gathered from the client list.
**Client blocking**
---------------------------------------------------
the blocking on key will still be triggered the same way as it is done today.
in order to block the current client on list of keys, the call to
blockForKeys will still need to be made which will perform the same as it is today:
* add the client to the list of blocked clients on each key
* keep the key with a matching list node (position in the global blocking clients list for that key)
in the client private blocking key dict.
* flag the client with CLIENT_BLOCKED
* update blocking statistics
* register the client on the timeout table
**Key Unblock**
---------------------------------------------------
Unblocking a specific key will be triggered (same as today) by calling signalKeyAsReady.
the implementation in that part will stay the same as today - adding the key to the global readyList.
The reason to maintain the readyList (as apposed to iterating over all clients blocked on the specific key)
is in order to keep the signal operation as short as possible, since it is called during the command processing.
The main change is that instead of going through a dedicated code path that operates the blocked command
we will just call processPendingCommandsAndResetClient.
**ClientUnblock (keys)**
---------------------------------------------------
1. Unblocking clients on keys will be triggered after command is
processed and during the beforeSleep
8. the general schema is:
9. For each key *k* in the readyList:
```
For each client *c* which is blocked on *k*:
in case either:
1. *k* exists AND the *k* type matches the current client blocking type
OR
2. *k* exists and *c* is blocked on module command
OR
3. *k* does not exists and *c* was blocked with the flag
unblock_on_deleted_key
do:
1. remove the client from the list of clients blocked on this key
2. remove the blocking list node from the client blocking key dict
3. remove the client from the timeout list
10. queue the client on the unblocked_clients list
11. *NEW*: call processCommandAndResetClient(c);
```
*NOTE:* for module blocked clients we will still call the moduleUnblockClientByHandle
which will queue the client for processing in moduleUnblockedClients list.
**Process Unblocked clients**
---------------------------------------------------
The process of all unblocked clients is done in the beforeSleep and no change is planned
in that part.
The general schema will be:
For each client *c* in server.unblocked_clients:
* remove client from the server.unblocked_clients
* set back the client readHandler
* continue processing the pending command and input buffer.
*Some notes regarding the new implementation*
---------------------------------------------------
1. Although it was proposed, it is currently difficult to remove the
read handler from the client while it is blocked.
The reason is that a blocked client should be unblocked when it is
disconnected, or we might consume data into void.
2. While this PR mainly keep the current blocking logic as-is, there
might be some future additions to the infrastructure that we would
like to have:
- allow non-preemptive blocking of client - sometimes we can think
that a new kind of blocking can be expected to not be preempt. for
example lets imagine we hold some keys on disk and when a command
needs to process them it will block until the keys are uploaded.
in this case we will want the client to not disconnect or be
unblocked until the process is completed (remove the client read
handler, prevent client timeout, disable unblock via debug command etc...).
- allow generic blocking based on command declared keys - we might
want to add a hook before command processing to check if any of the
declared keys require the command to block. this way it would be
easier to add new kinds of key-based blocking mechanisms.
Co-authored-by: Oran Agra <oran@redislabs.com>
Signed-off-by: Ran Shidlansik <ranshid@amazon.com>
This test failed in FreeBSD:
```
*** [err]: PTTL returns time to live in milliseconds in tests/unit/expire.tcl
Expected 836 > 900 && 836 <= 1000 (context: type eval line 5 cmd {assert {$ttl > 900 && $ttl <= 1000}} proc ::test)
```
On some slow machines, sometimes the test take close to 200ms
to finish. We only set aside 100ms, so that caused the failure.
Since the failure was around 800, change the condition to be >500.
1. Get rid of server.core_propagates - we can just rely on module/call nesting levels
2. Rename in_nested_call to execution_nesting and update the comment
3. Remove module_ctx_nesting (redundant, we can use execution_nesting)
4. Modify postExecutionUnitOperations according to the comment (The main purpose of this PR)
5. trackingHandlePendingKeyInvalidations: Check the nesting level inside this function
I've seen the `BRPOPLPUSH with multiple blocked clients` test hang.
this probably happened because rd2 blocked before rd1 and then it was
also released first, and rd1 remained blocked.
```
r del blist{t} target1{t} target2{t}
r set target1{t} nolist
$rd1 brpoplpush blist{t} target1{t} 0
$rd2 brpoplpush blist{t} target2{t} 0
r lpush blist{t} foo
assert_error "WRONGTYPE*" {$rd1 read}
assert_equal {foo} [$rd2 read]
assert_equal {foo} [r lrange target2{t} 0 -1]
```
changes:
* added all missing calls for wait_for_blocked_client after issuing blocking commands)
* removed some excessive `after 100`
* fix undetected crossslot error in BRPOPLPUSH test
* rollback changes to proto-max-bulk-len so external tests can be rerun
Fix a flaky test that probably fails on overload timing issues.
This unit starts with
```
# Set a threshold high enough to avoid spurious latency events.
r config set latency-monitor-threshold 200
```
but later the test measuring expire event changes the threshold.
this fix is to revert it to 200 after that test.
Got this error (ARM+TLS)
```
*** [err]: LATENCY RESET is able to reset events in tests/unit/latency-monitor.tcl
Expected [r latency latest] eq {} (context: type eval line 3 cmd {assert {[r latency latest] eq {}}} proc ::test)
```
Fixes a regression introduced by #11552 in 7.0.6.
it causes replies in the GEO commands to contain garbage when the
result is a very small distance (less than 1)
Includes test to confirm indeed with junk in buffer now we properly reply
In #11290, we added listpack encoding for SET object.
But forgot to support it in zuiFind, causes ZINTER, ZINTERSTORE,
ZINTERCARD, ZIDFF, ZDIFFSTORE to crash.
And forgot to support it in RM_ScanKey, causes it hang.
This PR add support SET listpack in zuiFind, and in RM_ScanKey.
And add tests for related commands to cover this case.
Other changes:
- There is no reason for zuiFind to go into the internals of the SET.
It can simply use setTypeIsMember and don't care about encoding.
- Remove the `#include "intset.h"` from server.h reduce the chance of
accidental intset API use.
- Move setTypeAddAux, setTypeRemoveAux and setTypeIsMemberAux
interfaces to the header.
- In scanGenericCommand, use setTypeInitIterator and setTypeNext
to handle OBJ_SET scan.
- In RM_ScanKey, improve hash scan mode, use lpGetValue like zset,
they can share code and better performance.
The zuiFind part fixes#11578
Co-authored-by: Oran Agra <oran@redislabs.com>
Co-authored-by: Viktor Söderqvist <viktor.soderqvist@est.tech>
We do defrag during AOF loading, but aim to detect fragmentation only
once a second, so this test aims to slow down the AOF loading and mimic
loading of a large file.
On fast machines the sleep, plus the actual work we did was insufficient
making it sleep longer so the test won't fail.
The error we used to get is this one:
Expected 0 > 100000 (context: type eval line 106 cmd {assert {$hits > 100000}} proc ::test)
From https://en.wikipedia.org/wiki/NaN#Display, it says
that apart from nan and -nan, we can also get NAN and even
nan(char-sequence) from libc.
In #11482, our conclusion was that we wanna normalize it in
Redis to a single nan type, like we already normalized inf.
For this, we also reverted the assert_match part of the test
added in #11506, using assert_equal to validate the changes.
## Issue
During the client input/output buffer processing, the memory usage is
incrementally updated to keep track of clients going beyond a certain
threshold `maxmemory-clients` to be evicted. However, this additional
tracking activity leads to unnecessary CPU cycles wasted when no
client-eviction is required. It is applicable in two cases.
* `maxmemory-clients` is set to `0` which equates to no client eviction
(applicable to all clients)
* `CLIENT NO-EVICT` flag is set to `ON` which equates to a particular
client not applicable for eviction.
## Solution
* Disable client memory usage tracking during the read/write flow when
`maxmemory-clients` is set to `0` or `client no-evict` is `on`.
The memory usage is tracked only during the `clientCron` i.e. it gets
periodically updated.
* Cleanup the clients from the memory usage bucket when client eviction
is disabled.
* When the maxmemory-clients config is enabled or disabled at runtime,
we immediately update the memory usage buckets for all clients (tested
scanning 80000 took some 20ms)
Benchmark shown that this can improve performance by about 5% in
certain situations.
Co-authored-by: Oran Agra <oran@redislabs.com>
This mechanism aims to reduce calls to malloc and free when
preparing the arguments the script sends to redis commands.
This is a mechanism was originally implemented in 48c49c4
and 4f68655, and was removed in #10220 (thinking it's not needed
and that it has no impact), but it now turns out it was wrong, and it
indeed provides some 5% performance improvement.
The implementation is a little bit too simplistic, it assumes consecutive
calls use the same size in the same arg index, but that's arguably
sufficient since it's only aimed at caching very small things.
We could even consider always pre-allocating args to the full
LUA_CMD_OBJCACHE_MAX_LEN (64 bytes) rather than the right size for the argument,
that would increase the chance they'll be able to be re-used.
But in some way this is already happening since we're using
sdsalloc, which in turn uses s_malloc_usable and takes ownership
of the full side of the allocation, so we are padded to the allocator
bucket size.
Co-authored-by: Oran Agra <oran@redislabs.com>
Co-authored-by: sundb <sundbcn@gmail.com>
GEODIST used snprintf("%.4f") for the reply using addReplyDoubleDistance,
which was slow. This PR optimizes it without breaking compatibility by following
the approach of ll2string with some changes to match the use case of distance
and precision. I.e. we multiply it by 10000 format it as an integer, and then add
a decimal point. This can achieve about 35% increase in the achievable ops/sec.
Co-authored-by: Oran Agra <oran@redislabs.com>
The test failed with ERR DUMP payload version or checksum are wrong.
And it only fails on CentOS, this is due to the fact that tcl8.5 does not correctly
parse the hexadecimal abbreviation. And in Ubuntu we are using tcl8.6.
1. "Fixed" the current code so that seen-time/idle actually refers to interaction
attempts (as documented; breaking change)
2. Added active-time/inactive to refer to successful interaction (what
seen-time/idle used to be)
At first, I tried to avoid changing the behavior of seen-time/idle but then realized
that, in this case, the odds are the people read the docs and implemented their
code based on the docs (which didn't match the behavior).
For the most part, that would work fine, except that issue #9996 was found.
I was working under the assumption that people relied on the docs, and for
the most part, it could have worked well enough. so instead of fixing the docs,
as I would usually do, I fixed the code to match the docs in this particular case.
Note that, in case the consumer has never read any entries, the values
for both "active-time" (XINFO FULL) and "inactive" (XINFO CONSUMERS) will
be -1, meaning here that the consumer was never active.
Note that seen/active time is only affected by XREADGROUP / X[AUTO]CLAIM, not
by XPENDING, XINFO, and other "read-only" stream CG commands (always has been,
even before this PR)
Other changes:
* Another behavioral change (arguably a bugfix) is that XREADGROUP and X[AUTO]CLAIM
create the consumer regardless of whether it was able to perform some reading/claiming
* RDB format change to save the `active_time`, and set it to the same value of `seen_time` in old rdb files.
Add a new module event `RedisModule_Event_Key`, this event is fired
when a key is removed from the keyspace.
The event includes an open key that can be used for reading the key before
it is removed. Modules can also extract the key-name, and use RM_Open
or RM_Call to access key from within that event, but shouldn't modify anything
from within this event.
The following sub events are available:
- `REDISMODULE_SUBEVENT_KEY_DELETED`
- `REDISMODULE_SUBEVENT_KEY_EXPIRED`
- `REDISMODULE_SUBEVENT_KEY_EVICTED`
- `REDISMODULE_SUBEVENT_KEY_OVERWRITE`
The data pointer can be casted to a RedisModuleKeyInfo structure
with the following fields:
```
RedisModuleKey *key; // Opened Key
```
### internals
* We also add two dict functions:
`dictTwoPhaseUnlinkFind` finds an element from the table, also get the plink of the entry.
The entry is returned if the element is found. The user should later call `dictTwoPhaseUnlinkFree`
with it in order to unlink and release it. Otherwise if the key is not found, NULL is returned.
These two functions should be used in pair. `dictTwoPhaseUnlinkFind` pauses rehash and
`dictTwoPhaseUnlinkFree` resumes rehash.
* We change `dbOverwrite` to `dbReplaceValue` which just replaces the value of the key and
doesn't fire any events. The "overwrite" part (which emits events) is just when called from `setKey`,
the other places that called dbOverwrite were ones that just update the value in-place (INCR*, SPOP,
and dbUnshareStringValue). This should not have any real impact since `moduleNotifyKeyUnlink` and
`signalDeletedKeyAsReady` wouldn't have mattered in these cases anyway (i.e. module keys and
stream keys didn't have direct calls to dbOverwrite)
* since we allow doing RM_OpenKey from withing these callbacks, we temporarily disable lazy expiry.
* We also temporarily disable lazy expiry when we are in unlink/unlink2 callback and keyspace
notification callback.
* Move special definitions to the top of redismodule.h
This is needed to resolve compilation errors with RedisModuleKeyInfoV1
that carries a RedisModuleKey member.
Co-authored-by: Oran Agra <oran@redislabs.com>
Before this PR, we use sdsMakeRoomFor() to expand the size of hyperloglog
string (sparse representation). And because sdsMakeRoomFor() uses a greedy
strategy (allocate about twice what we need), the memory we allocated for the
hyperloglog may be more than `server.hll_sparse_max_bytes` bytes.
The memory more than` server.hll_sparse_max_bytes` will be wasted.
In this pull request, tone down the greediness of the allocation growth, and also
make sure it'll never request more than `server.hll_sparse_max_bytes`.
This could in theory mean the size of the hyperloglog string is insufficient for the
increment we need, should be ok since in this case we promote the hyperloglog
to dense representation, an assertion was added to make sure.
This PR also add some tests and fixes some typo and indentation issues.
Add an option "withscores" to ZRANK and ZREVRANK.
Add `[withscore]` option to both `zrank` and `zrevrank`, like this:
```
z[rev]rank key member [withscore]
```
The cluster-announce-port/cluster-announce-bus-port/cluster-announce-tls-port should take effect at runtime
Co-authored-by: Madelyn Olson <madelyneolson@gmail.com>
### Summary of API additions
* `RedisModule_AddPostNotificationJob` - new API to call inside a key space
notification (and on more locations in the future) and allow to add a post job as describe above.
* New module option, `REDISMODULE_OPTIONS_ALLOW_NESTED_KEYSPACE_NOTIFICATIONS`,
allows to disable Redis protection of nested key-space notifications.
* `RedisModule_GetModuleOptionsAll` - gets the mask of all supported module options so a module
will be able to check if a given option is supported by the current running Redis instance.
### Background
The following PR is a proposal of handling write operations inside module key space notifications.
After a lot of discussions we came to a conclusion that module should not perform any write
operations on key space notification.
Some examples of issues that such write operation can cause are describe on the following links:
* Bad replication oreder - https://github.com/redis/redis/pull/10969
* Used after free - https://github.com/redis/redis/pull/10969#issuecomment-1223771006
* Used after free - https://github.com/redis/redis/pull/9406#issuecomment-1221684054
There are probably more issues that are yet to be discovered. The underline problem with writing
inside key space notification is that the notification runs synchronously, this means that the notification
code will be executed in the middle on Redis logic (commands logic, eviction, expire).
Redis **do not assume** that the data might change while running the logic and such changes
can crash Redis or cause unexpected behaviour.
The solution is to state that modules **should not** perform any write command inside key space
notification (we can chose whether or not we want to force it). To still cover the use-case where
module wants to perform a write operation as a reaction to key space notifications, we introduce
a new API , `RedisModule_AddPostNotificationJob`, that allows to register a callback that will be
called by Redis when the following conditions hold:
* It is safe to perform any write operation.
* The job will be called atomically along side the operation that triggers it (in our case, key
space notification).
Module can use this new API to safely perform any write operation and still achieve atomicity
between the notification and the write.
Although currently the API is supported on key space notifications, the API is written in a generic
way so that in the future we will be able to use it on other places (server events for example).
### Technical Details
Whenever a module uses `RedisModule_AddPostNotificationJob` the callback is added to a list
of callbacks (called `modulePostExecUnitJobs`) that need to be invoke after the current execution
unit ends (whether its a command, eviction, or active expire). In order to trigger those callback
atomically with the notification effect, we call those callbacks on `postExecutionUnitOperations`
(which was `propagatePendingCommands` before this PR). The new function fires the post jobs
and then calls `propagatePendingCommands`.
If the callback perform more operations that triggers more key space notifications. Those keys
space notifications might register more callbacks. Those callbacks will be added to the end
of `modulePostExecUnitJobs` list and will be invoke atomically after the current callback ends.
This raises a concerns of entering an infinite loops, we consider infinite loops as a logical bug
that need to be fixed in the module, an attempt to protect against infinite loops by halting the
execution could result in violation of the feature correctness and so **Redis will make no attempt
to protect the module from infinite loops**
In addition, currently key space notifications are not nested. Some modules might want to allow
nesting key-space notifications. To allow that and keep backward compatibility, we introduce a
new module option called `REDISMODULE_OPTIONS_ALLOW_NESTED_KEYSPACE_NOTIFICATIONS`.
Setting this option will disable the Redis key-space notifications nesting protection and will
pass this responsibility to the module.
### Redis infrastructure
This PR promotes the existing `propagatePendingCommands` to an "Execution Unit" concept,
which is called after each atomic unit of execution,
Co-authored-by: Oran Agra <oran@redislabs.com>
Co-authored-by: Yossi Gottlieb <yossigo@gmail.com>
Co-authored-by: Madelyn Olson <34459052+madolson@users.noreply.github.com>
This PR add `assert_refcount_morethan`, and modify `assert_refcount` to skip
the `OBJECT REFCOUNT` check with `needs:debug` flag. Use them to modify all
`OBJECT REFCOUNT` calls and also update the tests/README to be more specific.
The reasoning is that some of these tests could be testing something important,
and along the way also add a check for the refcount, and it could be a shame to skip
the whole test just because the refcount functionality is missing or blocked.
but much like the fact that some redis variants may not support DEBUG,
and still we want to run the majority of the test for coverage, and just skip the digest match.
Improve memory efficiency of list keys
## Description of the feature
The new listpack encoding uses the old `list-max-listpack-size` config
to perform the conversion, which we can think it of as a node inside a
quicklist, but without 80 bytes overhead (internal fragmentation included)
of quicklist and quicklistNode structs.
For example, a list key with 5 items of 10 chars each, now takes 128 bytes
instead of 208 it used to take.
## Conversion rules
* Convert listpack to quicklist
When the listpack length or size reaches the `list-max-listpack-size` limit,
it will be converted to a quicklist.
* Convert quicklist to listpack
When a quicklist has only one node, and its length or size is reduced to half
of the `list-max-listpack-size` limit, it will be converted to a listpack.
This is done to avoid frequent conversions when we add or remove at the bounding size or length.
## Interface changes
1. add list entry param to listTypeSetIteratorDirection
When list encoding is listpack, `listTypeIterator->lpi` points to the next entry of current entry,
so when changing the direction, we need to use the current node (listTypeEntry->p) to
update `listTypeIterator->lpi` to the next node in the reverse direction.
## Benchmark
### Listpack VS Quicklist with one node
* LPUSH - roughly 0.3% improvement
* LRANGE - roughly 13% improvement
### Both are quicklist
* LRANGE - roughly 3% improvement
* LRANGE without pipeline - roughly 3% improvement
From the benchmark, as we can see from the results
1. When list is quicklist encoding, LRANGE improves performance by <5%.
2. When list is listpack encoding, LRANGE improves performance by ~13%,
the main enhancement is brought by `addListListpackRangeReply()`.
## Memory usage
1M lists(key:0~key:1000000) with 5 items of 10 chars ("hellohello") each.
shows memory usage down by 35.49%, from 214MB to 138MB.
## Note
1. Add conversion callback to support doing some work before conversion
Since the quicklist iterator decompresses the current node when it is released, we can
no longer decompress the quicklist after we convert the list.
Both functions and eval are marked as "no-monitor", since we want to explicitly feed in the script command before the commands generated by the script. Note that we want this behavior generally, so that commands can redact arguments before being added to the monitor.
The test introduced in #11482 fail on ARM (extra CI):
```
*** [err]: RESP2: RM_ReplyWithDouble: NaN in tests/unit/moduleapi/reply.tcl
Expected '-nan' to be equal to 'nan' (context: type eval line 3 cmd
{assert_equal "-nan" [r rw.double 0 0]} proc ::test)
*** [err]: RESP3: RM_ReplyWithDouble: NaN in tests/unit/moduleapi/reply.tcl
Expected ',-nan' to be equal to ',nan' (context: type eval line 8 cmd
{assert_equal ",-nan" [r rw.double 0 0]} proc ::test)
```
It looks like there is no negative nan on ARM.
In moduleFireServerEvent we change the real client DB to 0 on freeClient in case the event is REDISMODULE_EVENT_CLIENT_CHANGE.
It results in a crash if the client is blocked on a key on other than DB 0.
The DB change is not necessary even for module-client, as we set its DB to 0 on either createClient or moduleReleaseTempClient.
Co-authored-by: Madelyn Olson <34459052+madolson@users.noreply.github.com>
Co-authored-by: Binbin <binloveplay1314@qq.com>
The test introduced in #11482 fail on mac:
```
*** [err]: RESP3: RM_ReplyWithDouble: inf in tests/unit/moduleapi/reply.tcl
Expected 'Inf' to be equal to 'inf'
(context: type eval line 6 cmd {assert_equal Inf [r rw.double inf]} proc ::test)
```
Looks like the mac platform returns inf instead of Inf in this case, this PR
uses readraw to verify the protocol.
Adding a test to cover the already existing behavior of NAN replies,
to accompany the PR that adds them to the RESP3 spec:
https://github.com/redis/redis-specifications/pull/10
This PR also covers Inf replies that are already in the spec, as well as RESP2 coverage.
Small sets with not only integer elements are listpack encoded, by default
up to 128 elements, max 64 bytes per element, new config `set-max-listpack-entries`
and `set-max-listpack-value`. This saves memory for small sets compared to using a hashtable.
Sets with only integers, even very small sets, are still intset encoded (up to 1G
limit, etc.). Larger sets are hashtable encoded.
This PR increments the RDB version, and has an effect on OBJECT ENCODING
Possible conversions when elements are added:
intset -> listpack
listpack -> hashtable
intset -> hashtable
Note: No conversion happens when elements are deleted. If all elements are
deleted and then added again, the set is deleted and recreated, thus implicitly
converted to a smaller encoding.
Introduce socket `shutdown()` into connection type, and use it
on normal socket if a fork is active. This allows us to close
client connections when there are child processes sharing the
file descriptors.
Fixes#10077. The reason is that since the `fork()` child is holding
the file descriptors, the `close` in `unlinkClient -> connClose`
isn't sufficient. The client will not realize that the connection is
disconnected until the child process ends.
Let's try to be conservative and only use shutdown when the fork is active.
Resolve an edge case where the ID of a stream is updated retroactively
to an ID lower than the already set max_deleted_entry_id.
Currently, if we have command as below:
**xsetid mystream 1-1 MAXDELETEDID 1-2**
Then we will get the following error:
**(error) ERR The ID specified in XSETID is smaller than the provided max_deleted_entry_id**
Becuase the provided MAXDELETEDID 1-2 is greated than input last-id: 1-1
Then we could assume there is a similar situation:
step 1: we add three items in the mystream
**127.0.0.1:6381> xadd mystream 1-1 a 1
"1-1"
127.0.0.1:6381> xadd mystream 1-2 b 2
"1-2"
127.0.0.1:6381> xadd mystream 1-3 c 3
"1-3"**
step 2: we could check the mystream infomation as below:
**127.0.0.1:6381> xinfo stream mystream
1) "length"
2) (integer) 3
7) "last-generated-id"
8) "1-3"
9) "max-deleted-entry-id"
10) "0-0"
step 3: we delete the item id 1-2 and 1-3 as below:
**127.0.0.1:6381> xdel mystream 1-2
(integer) 1
127.0.0.1:6381> xdel mystream 1-3
(integer) 1**
step 4: we check the mystream information:
127.0.0.1:6381> xinfo stream mystream
1) "length"
2) (integer) 1
7) "last-generated-id"
8) "1-3"
9) "max-deleted-entry-id"
10) "1-3"
we could notice that the **max-deleted-entry-id update to 1-3**, so right now, if we just run:
**xsetid mystream 1-2**
the above command has the same effect with **xsetid mystream 1-2 MAXDELETEDID 1-3**
So we should return an error to the client that **(error) ERR The ID specified in XSETID is smaller than current max_deleted_entry_id**
According to the source code, the commands can be executed with only key name,
and no GET/SET/INCR operation arguments.
change the docs to reflect that by marking these arguments as optional.
also add tests.
Renamed from "Pause Clients" to "Pause Actions" since the mechanism can pause
several actions in redis, not just clients (e.g. eviction, expiration).
Previously each pause purpose (which has a timeout that's tracked separately from others purposes),
also implicitly dictated what it pauses (reads, writes, eviction, etc). Now it is explicit, and
the actions that are paused (bit flags) are defined separately from the purpose.
- Previously, when using feature pause-client it also implicitly means to make the server static:
- Pause replica traffic
- Pauses eviction processing
- Pauses expire processing
Making the server static is used also for failover and shutdown. This PR internally rebrand
pause-client API to become pause-action API. It also Simplifies pauseClients structure
by replacing pointers array with static array.
The context of this PR is to add another trigger to pause-client which will activated in case
of OOM as throttling mechanism ([see here](https://github.com/redis/redis/issues/10907)).
In this case we want only to pause client, and eviction actions.
RM_Call is designed to let modules call redis commands disregarding the
OOM state (the module is responsible to declare its command flags to redis,
or perform the necessary checks).
The other (new) alternative is to pass the "M" flag to RM_Call so that redis can
OOM reject commands implicitly.
However, Currently, RM_Call enforces OOM on scripts (excluding scripts that
declared `allow-oom`) in all cases, regardless of the RM_Call "M" flag being present.
This PR fixes scripts to be consistent with other commands being executed by RM_Call.
It modifies the flow in effect treats scripts as if they if they have the ALLOW_OOM script
flag, if the "M" flag is not passed (i.e. no OOM checking is being performed by RM_Call,
so no OOM checking should be done on script).
Co-authored-by: Oran Agra <oran@redislabs.com>
This is a rare failure mode of a new feature of redis 7 introduced in #9217
(when the incremental part of the ID overflows).
Till now, the outcome of that error was undetermined (could easily result in
`Elements are too large to be stored` wrongly, due to unset `errno`).
The following two cases will create an empty destkey HLL:
1. called with no source keys, like `pfmerge destkey`
2. called with non-existing source keys, like `pfmerge destkey non-existing-source-key`
In the first case, in `PFMERGE`, the dest key is actually one of the source keys too.
So `PFMERGE k1 k2` is equivalent to `SUNIONSTORE k1 k1 k2`,
and `PFMERGE k1` is equivalent to `SUNIONSTORE k1 k1`.
So the first case is reasonable, the source key is actually optional.
And the second case, `PFMERGE` on missing keys should succeed and create an empty dest.
This is consistent with `PFCOUNT`, and also with `SUNIONSTORE`, no need to change.
In the module, we will reuse the list iterator entry for RM_ListDelete, but `listTypeDelete` will only update
`quicklistEntry->zi` but not `quicklistEntry->node`, which will result in `quicklistEntry->node` pointing to
a freed memory address if the quicklist node is deleted.
This PR sync `key->u.list.index` and `key->u.list.entry` to list iterator after `RM_ListDelete`.
This PR also optimizes the release code of the original list iterator.
Co-authored-by: Viktor Söderqvist <viktor@zuiderkwast.se>
The use case is a module that wants to implement a blocking command on a key that
necessarily exists and wants to unblock the client in case the key is deleted (much like
what we implemented for XREADGROUP in #10306)
New module API:
* RedisModule_BlockClientOnKeysWithFlags
Flags:
* REDISMODULE_BLOCK_UNBLOCK_NONE
* REDISMODULE_BLOCK_UNBLOCK_DELETED
### Detailed description of code changes
blocked.c:
1. Both module and stream functions are called whether the key exists or not, regardless of
its type. We do that in order to allow modules/stream to unblock the client in case the key
is no longer present or has changed type (the behavior for streams didn't change, just code
that moved into serveClientsBlockedOnStreamKey)
2. Make sure afterCommand is called in serveClientsBlockedOnKeyByModule, in order to propagate
actions from moduleTryServeClientBlockedOnKey.
3. handleClientsBlockedOnKeys: call propagatePendingCommands directly after lookupKeyReadWithFlags
to prevent a possible lazy-expire DEL from being mixed with any command propagated by the
preceding functions.
4. blockForKeys: Caller can specifiy that it wants to be awakened if key is deleted.
Minor optimizations (use dictAddRaw).
5. signalKeyAsReady became signalKeyAsReadyLogic which can take a boolean in case the key is deleted.
It will only signal if there's at least one client that awaits key deletion (to save calls to
handleClientsBlockedOnKeys).
Minor optimizations (use dictAddRaw)
db.c:
1. scanDatabaseForDeletedStreams is now scanDatabaseForDeletedKeys and will signalKeyAsReady
for any key that was removed from the database or changed type. It is the responsibility of the code
in blocked.c to ignore or act on deleted/type-changed keys.
2. Use the new signalDeletedKeyAsReady where needed
blockedonkey.c + tcl:
1. Added test of new capabilities (FSL.BPOPGT now requires the key to exist in order to work)
### Background
The issue is that when saving an RDB with module AUX data, the module AUX metadata
(moduleid, when, ...) is saved to the RDB even though the module did not saved any actual data.
This prevent loading the RDB in the absence of the module (although there is no actual data in
the RDB that requires the module to be loaded).
### Solution
The solution suggested in this PR is that module AUX will be saved on the RDB only if the module
actually saved something during `aux_save` function.
To support backward compatibility, we introduce `aux_save2` callback that acts the same as
`aux_save` with the tiny change of avoid saving the aux field if no data was actually saved by
the module. Modules can use the new API to make sure that if they have no data to save,
then it will be possible to load the created RDB even without the module.
### Concerns
A module may register for the aux load and save hooks just in order to be notified when
saving or loading starts or completed (there are better ways to do that, but it still possible
that someone used it).
However, if a module didn't save a single field in the save callback, it means it's not allowed
to read in the read callback, since it has no way to distinguish between empty and non-empty
payloads. furthermore, it means that if the module did that, it must never change it, since it'll
break compatibility with it's old RDB files, so this is really not a valid use case.
Since some modules (ones who currently save one field indicating an empty payload), need
to know if saving an empty payload is valid, and if Redis is gonna ignore an empty payload
or store it, we opted to add a new API (rather than change behavior of an existing API and
expect modules to check the redis version)
### Technical Details
To avoid saving AUX data on RDB, we change the code to first save the AUX metadata
(moduleid, when, ...) into a temporary buffer. The buffer is then flushed to the rio at the first
time the module makes a write operation inside the `aux_save` function. If the module saves
nothing (and `aux_save2` was used), the entire temporary buffer is simply dropped and no
data about this AUX field is saved to the RDB. This make it possible to load the RDB even in
the absence of the module.
Test was added to verify the fix.
Motivation: for applications that use RM ACL verification functions, they would
want to return errors back to the user, in ways that are consistent with Redis.
While investigating how we should return ACL errors to the user, we realized that
Redis isn't consistent, and currently returns ACL error strings in 3 primary ways.
[For the actual implications of this change, see the "Impact" section at the bottom]
1. how it returns an error when calling a command normally
ACL_DENIED_CMD -> "this user has no permissions to run the '%s' command"
ACL_DENIED_KEY -> "this user has no permissions to access one of the keys used as arguments"
ACL_DENIED_CHANNEL -> "this user has no permissions to access one of the channels used as arguments"
2. how it returns an error when calling via 'acl dryrun' command
ACL_DENIED_CMD -> "This user has no permissions to run the '%s' command"
ACL_DENIED_KEY -> "This user has no permissions to access the '%s' key"
ACL_DENIED_CHANNEL -> "This user has no permissions to access the '%s' channel"
3. how it returns an error via RM_Call (and scripting is similar).
ACL_DENIED_CMD -> "can't run this command or subcommand";
ACL_DENIED_KEY -> "can't access at least one of the keys mentioned in the command arguments";
ACL_DENIED_CHANNEL -> "can't publish to the channel mentioned in the command";
In addition, if one wants to use RM_Call's "dry run" capability instead of the RM ACL
functions directly, one also sees a different problem than it returns ACL errors with a -ERR,
not a -PERM, so it can't be returned directly to the caller.
This PR modifies the code to generate a base message in a common manner with the ability
to set verbose flag for acl dry run errors, and keep it unset for normal/rm_call/script cases
```c
sds getAclErrorMessage(int acl_res, user *user, struct redisCommand *cmd, sds errored_val, int verbose) {
switch (acl_res) {
case ACL_DENIED_CMD:
return sdscatfmt(sdsempty(), "User %S has no permissions to run "
"the '%S' command", user->name, cmd->fullname);
case ACL_DENIED_KEY:
if (verbose) {
return sdscatfmt(sdsempty(), "User %S has no permissions to access "
"the '%S' key", user->name, errored_val);
} else {
return sdsnew("No permissions to access a key");
}
case ACL_DENIED_CHANNEL:
if (verbose) {
return sdscatfmt(sdsempty(), "User %S has no permissions to access "
"the '%S' channel", user->name, errored_val);
} else {
return sdsnew("No permissions to access a channel");
}
}
```
The caller can append/prepend the message (adding NOPERM for normal/RM_Call or indicating it's within a script).
Impact:
- Plain commands, as well as scripts and RM_Call now include the user name.
- ACL DRYRUN remains the only one that's verbose (mentions the offending channel or key name)
- Changes RM_Call ACL errors from being a `-ERR` to being `-NOPERM` (besides for textual changes)
**This somewhat a breaking change, but it only affects the RM_Call with both `C` and `E`, or `D`**
- Changes ACL errors in scripts textually from being
`The user executing the script <old non unified text>`
to
`ACL failure in script: <new unified text>`
As discussed on #11084, `propagatePendingCommands` should happened after the del
notification is fired so that the notification effect and the `del` will be replicated inside MULTI EXEC.
Test was added to verify the fix.
All commands / use cases that heavily rely on double to a string representation conversion,
(e.g. meaning take a double-precision floating-point number like 1.5 and return a string like "1.5" ),
could benefit from a performance boost by swapping snprintf(buf,len,"%.17g",value) by the
equivalent [fpconv_dtoa](https://github.com/night-shift/fpconv) or any other algorithm that ensures
100% coverage of conversion.
This is a well-studied topic and Projects like MongoDB. RedPanda, PyTorch leverage libraries
( fmtlib ) that use the optimized double to string conversion underneath.
The positive impact can be substantial. This PR uses the grisu2 approach ( grisu explained on
https://www.cs.tufts.edu/~nr/cs257/archive/florian-loitsch/printf.pdf section 5 ).
test suite changes:
Despite being compatible, in some cases it produces a different result from printf, and some tests
had to be adjusted.
one case is that `%.17g` (which means %e or %f which ever is shorter), chose to use `5000000000`
instead of 5e+9, which sounds like a bug?
In other cases, we changed TCL to compare numbers instead of strings to ignore minor rounding
issues (`expr 0.8 == 0.79999999999999999`)
When using the MIGRATE, with a destination Redis that has the user name or password set to the string "keys",
Redis would have determine the wrong set of key names the command is gonna access.
This lead to ACL returning wrong authentication result.
Destination instance:
```
127.0.0.1:6380> acl setuser default >keys
OK
127.0.0.1:6380> acl setuser keys on nopass ~* &* +@all
OK
```
Source instance:
```
127.0.0.1:6379> set a 123
OK
127.0.0.1:6379> acl setuser cc on nopass ~a* +@all
OK
127.0.0.1:6379> auth cc 1
OK
127.0.0.1:6379> migrate 127.0.0.1 6380 "" 0 1000 auth keys keys a
(error) NOPERM this user has no permissions to access one of the keys used as arguments
127.0.0.1:6379> migrate 127.0.0.1 6380 "" 0 1000 auth2 keys pswd keys a
(error) NOPERM this user has no permissions to access one of the keys used as arguments
```
Using `acl dryrun` we know that the parameters of `auth` and `auth2` are mistaken for the `keys` option.
```
127.0.0.1:6379> acl dryrun cc migrate whatever whatever "" 0 1000 auth keys keys a
"This user has no permissions to access the 'keys' key"
127.0.0.1:6379> acl dryrun cc migrate whatever whatever "" 0 1000 auth2 keys pswd keys a
"This user has no permissions to access the 'pswd' key"
```
Fix the bug by editing db.c/migrateGetKeys function, which finds the `keys` option and all the keys following.
PR #9320 introduces initialization order changes. Now cluster is initialized after modules.
This changes causes a crash if the module uses RM_Call inside the load function
on cluster mode (the code will try to access `server.cluster` which at this point is NULL).
To solve it, separate cluster initialization into 2 phases:
1. Structure initialization that happened before the modules initialization
2. Listener initialization that happened after.
Test was added to verify the fix.
Freeze time during execution of scripts and all other commands.
This means that a key is either expired or not, and doesn't change
state during a script execution. resolves#10182
This PR try to add a new `commandTimeSnapshot` function.
The function logic is extracted from `keyIsExpired`, but the related
calls to `fixed_time_expire` and `mstime()` are removed, see below.
In commands, we will avoid calling `mstime()` multiple times
and just use the one that sampled in call. The background is,
e.g. using `PEXPIRE 1` with valgrind sometimes result in the key
being deleted rather than expired. The reason is that both `PEXPIRE`
command and `checkAlreadyExpired` call `mstime()` separately.
There are other more important changes in this PR:
1. Eliminate `fixed_time_expire`, it is no longer needed.
When we want to sample time we should always use a time snapshot.
We will use `in_nested_call` instead to update the cached time in `call`.
2. Move the call for `updateCachedTime` from `serverCron` to `afterSleep`.
Now `commandTimeSnapshot` will always return the sample time, the
`lookupKeyReadWithFlags` call in `getNodeByQuery` will get a outdated
cached time (because `processCommand` is out of the `call` context).
We put the call to `updateCachedTime` in `aftersleep`.
3. Cache the time each time the module lock Redis.
Call `updateCachedTime` in `moduleGILAfterLock`, affecting `RM_ThreadSafeContextLock`
and `RM_ThreadSafeContextTryLock`
Currently the commandTimeSnapshot change affects the following TTL commands:
- SET EX / SET PX
- EXPIRE / PEXPIRE
- SETEX / PSETEX
- GETEX EX / GETEX PX
- TTL / PTTL
- EXPIRETIME / PEXPIRETIME
- RESTORE key TTL
And other commands just use the cached mstime (including TIME).
This is considered to be a breaking change since it can break a script
that uses a loop to wait for a key to expire.
As mentioned on docs, `RM_ResetDataset` Performs similar operation to FLUSHALL.
As FLUSHALL do not clean the function, `RM_ResetDataset` should not clean the functions
as well.
Refine getTimeoutFromObjectOrReply() out-of-range check.
Timeout is parsed (and verifies out of range) as double and
multiplied by 1000, added mstime() and stored in long-long
which might lead to out-of-range value of long-long.
Co-authored-by: moticless <moticless@github.com>
Co-authored-by: Oran Agra <oran@redislabs.com>
Co-authored-by: Ozan Tezcan <ozantezcan@gmail.com>
This PR introduces a couple of changes to improve cluster test stability:
1. Increase the cluster node timeout to 3 seconds, which is similar to the
normal cluster tests, but introduce a new mechanism to increase the ping
period so that the tests are still fast. This new config is a debug config.
2. Set `cluster-replica-no-failover yes` on a wider array of tests which are
sensitive to failovers. This was occurring on the ARM CI.
There is a race condition in the test:
```
*** [err]: redis-cli --cluster add-node with cluster-port in tests/unit/cluster/cli.tcl
Expected '5' to be equal to '4' {assert_equal 5 [CI 0 cluster_known_nodes]} proc ::test)
```
When using cli to add node, there can potentially be a race condition
in which all nodes presenting cluster state o.k even though the added
node did not yet meet all cluster nodes.
This comment and the fix were taken from #11221. Also apply it in several
other similar places.
Mainly fix two minor bug
1. When handle BL*POP/BLMOVE commands with blocked clients, we should increment server.dirty.
2. `listPopRangeAndReplyWithKey()` in `serveClientBlockedOnList()` should not repeat calling
`signalModifiedKey()` which has been called when an element was pushed on the list.
(was skipped in all bpop commands, other than blmpop)
Other optimization
add `signal` param for `listElementsRemoved` to skip `signalModifiedKey()` to unify all pop operation.
Unifying all pop operations also prepares us for #11303, so that we can avoid having to deal with the
conversion from quicklist to listpack() in various places when the list shrinks.
The original idea behind auto-setting the default (first,last,step) spec was to use
the most "open" flags when the user didn't provide any key-spec flags information.
While the above idea is a good approach, it really makes no sense to set
CMD_KEY_VARIABLE_FLAGS if the user didn't provide the getkeys-api flag:
in this case there's not way to retrieve these variable flags, so what's the point?
Internally in redis there was code to ignore this already, so this fix doesn't change
redis's behavior, it only affects the output of COMMAND command.
If a command gets an OOM response and then if we set maxmemory to zero
to disable the limit, server.pre_command_oom_state never gets updated
and it stays true. As RM_Call() calls with "respect deny-oom" flag checks
server.pre_command_oom_state, all calls will fail with OOM.
Added server.maxmemory check in RM_Call() to process deny-oom flag
only if maxmemory is configured.
Adds a number of user management/ACL validaiton/command execution functions to improve a
Redis module's ability to enforce ACLs correctly and easily.
* RM_SetContextUser - sets a RedisModuleUser on the context, which RM_Call will use to both
validate ACLs (if requested and set) as well as assign to the client so that scripts executed via
RM_Call will have proper ACL validation.
* RM_SetModuleUserACLString - Enables one to pass an entire ACL string, not just a single OP
and have it applied to the user
* RM_GetModuleUserACLString - returns a stringified version of the user's ACL (same format as dump
and list). Contains an optimization to cache the stringified version until the underlying ACL is modified.
* Slightly re-purpose the "C" flag to RM_Call from just being about ACL check before calling the
command, to actually running the command with the right user, so that it also affects commands
inside EVAL scripts. see #11231
Executing an XAUTOCLAIM command on a stream key in a specific state, with a
specially crafted COUNT argument may cause an integer overflow, a subsequent
heap overflow, and potentially lead to remote code execution.
The problem affects Redis versions 7.0.0 or newer.
Starting from 6.2, after ACL SETUSER user reset, the user
will carry the sanitize-payload flag. It was added in #7807,
and then ACL SETUSER reset is inconsistent with default
newly created user which missing sanitize-payload flag.
Same as `off` and `on` these two bits are mutually exclusive,
the default created user needs to have sanitize-payload flag.
Adds USER_FLAG_SANITIZE_PAYLOAD flag to ACLCreateUser.
Note that the bug don't have any real implications,
since the code in rdb.c (rdbLoadObject) checks for
`USER_FLAG_SANITIZE_PAYLOAD_SKIP`, so the fact that
`USER_FLAG_SANITIZE_PAYLOAD` is missing doesn't really matters.
Added tests to make sure it won't be broken in the future,
and updated the comment in ACLSetUser and redis.conf
When using `INFO ALL <section>`, when `section` is a specific module section.
Redis will not print the additional section(s).
The fix in this case, will search the modules info sections if the user provided additional sections to `ALL`.
Co-authored-by: Oran Agra <oran@redislabs.com>
This PR mainly deals with 2 crashes introduced in #9357,
and fix the QUICKLIST-PACKED-THRESHOLD mess in external test mode.
1. Fix crash due to deleting an entry from a compress quicklistNode
When inserting a large element, we need to create a new quicklistNode first,
and then delete its previous element, if the node where the deleted element is
located is compressed, it will cause a crash.
Now add `dont_compress` to quicklistNode, if we want to use a quicklistNode
after some operation, we can use this flag like following:
```c
node->dont_compress = 1; /* Prevent to be compressed */
some_operation(node); /* This operation might try to compress this node */
some_other_operation(node); /* We can use this node without decompress it */
node->dont_compress = 0; /* Re-able compression */
quicklistCompressNode(node);
```
Perhaps in the future, we could just disable the current entry from being
compressed during the iterator loop, but that would require more work.
2. Fix crash due to wrongly split quicklist
before #9357, the offset param of _quicklistSplitNode() will not negative.
For now, when offset is negative, the split extent will be wrong.
following example:
```c
int orig_start = after ? offset + 1 : 0;
int orig_extent = after ? -1 : offset;
int new_start = after ? 0 : offset;
int new_extent = after ? offset + 1 : -1;
# offset: -2, after: 1, node->count: 2
# current wrong range: [-1,-1] [0,-1]
# correct range: [1,-1] [0, 1]
```
Because only `_quicklistInsert()` splits the quicklistNode and only
`quicklistInsertAfter()`, `quicklistInsertBefore()` call _quicklistInsert(),
so `quicklistReplaceEntry()` and `listTypeInsert()` might occur this crash.
But the iterator of `listTypeInsert()` is alway from head to tail(iter->offset is
always positive), so it is not affected.
The final conclusion is this crash only occur when we insert a large element
with negative index into a list, that affects `LSET` command and `RM_ListSet`
module api.
3. In external test mode, we need to restore quicklist packed threshold after
when the end of test.
4. Show `node->count` in quicklistRepr().
5. Add new tcl proc `config_get_set` to support restoring config in tests.
When using cli to add node, there can potentially be a race condition in
which all nodes presenting cluster state o.k even though the added node
did not yet meet all cluster nodes.
this adds another utility function to wait until all cluster nodes see the same cluster size
Add a new "D" flag to RM_Call which runs whatever verification the user requests,
but returns before the actual execution of the command.
It automatically enables returning error messages as CallReply objects to distinguish
success (NULL) from failure (CallReply returned).
When RM_Call was used with `M` (reject OOM), `W` (reject writes),
as well as `S` (rejecting stale or write commands in "Script mode"),
it would have only checked the command flags, but not the declared
script flag in case it's a command that runs a script.
Refactoring: extracts out similar code in server.c's processCommand
to be usable in RM_Call as well.
Bugfix:
with the scenario if we force assigned a slot to other master,
old master will lose the slot ownership, then old master will
call the function delKeysInSlot() to delete all keys which in
the slot. These delete operations should replicate to replicas,
avoid the data divergence issue in master and replicas.
Additionally, in this case, we now call:
* signalModifiedKey (to invalidate WATCH)
* moduleNotifyKeyspaceEvent (key space notification for modules)
* dirty++ (to signal that the persistence file may be outdated)
Co-authored-by: weimeng <weimeng@didiglobal.com>
Co-authored-by: Madelyn Olson <madelyneolson@gmail.com>
Check the validity of the value before performing the create operation,
prevents new data from being generated even if the request fails to execute.
Co-authored-by: Oran Agra <oran@redislabs.com>
Co-authored-by: chendianqiang <chendianqiang@meituan.com>
Co-authored-by: Binbin <binloveplay1314@qq.com>
Redis 7.0 has #9890 which added an assertion when the propagation queue
was not flushed and we got to beforeSleep.
But it turns out that when processCommands calls getNodeByQuery and
decides to reject the command, it can lead to a key that was lazy
expired and is deleted without later flushing the propagation queue.
This change prevents lazy expiry from deleting the key at this stage
(not as part of a command being processed in `call`)
The PR reverts the changes made on #10969.
The reason for revert was trigger because of occasional test failure
that started after the PR was merged.
The issue is that if there is a lazy expire during the command invocation,
the `del` command is added to the replication stream after the command
placeholder. So the logical order on the primary is:
* Delete the key (lazy expiration)
* Command invocation
But the replication stream gets it the other way around:
* Command invocation (because the command is written into the placeholder)
* Delete the key (lazy expiration)
So if the command write to the key that was just lazy expired we will get
inconsistency between primary and replica.
One solution we considered is to add another lazy expire replication stream
and write all the lazy expire there. Then when replicating, we will replicate the
lazy expire replication stream first. This will solve this specific test failure but
we realize that the issues does not ends here and the more we dig the more
problems we find.One of the example we thought about (that can actually
crashes Redis) is as follow:
* User perform SINTERSTORE
* When Redis tries to fetch the second input key it triggers lazy expire
* The lazy expire trigger a module logic that deletes the first input key
* Now Redis hold the robj of the first input key that was actually freed
We believe we took the wrong approach and we will come up with another
PR that solve the problem differently, for now we revert the changes so we
will not have the tests failure.
Notice that not the entire code was revert, some parts of the PR are changes
that we would like to keep. The changes that **was** reverted are:
* Saving a placeholder for replication at the beginning of the command (`call` function)
* Order of the replication stream on active expire and eviction (we will decide how
to handle it correctly on follow up PR)
* `Spop` changes are no longer needed (because we reverted the placeholder code)
Changes that **was not** reverted:
* On expire/eviction, wrap the `del` and the notification effect in a multi exec.
* `PropagateNow` function can still accept a special dbid, -1, indicating not to replicate select.
* Keep optimisation for reusing the `alsoPropagate` array instead of allocating it each time.
Tests:
* All tests was kept and only few tests was modify to work correctly with the changes
* Test was added to verify that the revert fixes the issues.
* Support BUILD_TLS=module to be loaded as a module via config file or
command line. e.g. redis-server --loadmodule redis-tls.so
* Updates to redismodule.h to allow it to be used side by side with
server.h by defining REDISMODULE_CORE_MODULE
* Changes to server.h, redismodule.h and module.c to avoid repeated
type declarations (gcc 4.8 doesn't like these)
* Add a mechanism for non-ABI neutral modules (ones who include
server.h) to refuse loading if they detect not being built together with
redis (release.c)
* Fix wrong signature of RedisModuleDefragFunc, this could break
compilation of a module, but not the ABI
* Move initialization of listeners in server.c to be after loading
the modules
* Config TLS after initialization of listeners
* Init cluster after initialization of listeners
* Add TLS module to CI
* Fix a test suite race conditions:
Now that the listeners are initialized later, it's not sufficient to
wait for the PID message in the log, we need to wait for the "Server
Initialized" message.
* Fix issues with moduleconfigs test as a result from start_server
waiting for "Server Initialized"
* Fix issues with modules/infra test as a result of an additional module
present
Notes about Sentinel:
Sentinel can't really rely on the tls module, since it uses hiredis to
initiate connections and depends on OpenSSL (won't be able to use any
other connection modules for that), so it was decided that when TLS is
built as a module, sentinel does not support TLS at all.
This means that it keeps using redis_tls_ctx and redis_tls_client_ctx directly.
Example code of config in redis-tls.so(may be use in the future):
RedisModuleString *tls_cfg = NULL;
void tlsInfo(RedisModuleInfoCtx *ctx, int for_crash_report) {
UNUSED(for_crash_report);
RedisModule_InfoAddSection(ctx, "");
RedisModule_InfoAddFieldLongLong(ctx, "var", 42);
}
int tlsCommand(RedisModuleCtx *ctx, RedisModuleString **argv, int argc)
{
if (argc != 2) return RedisModule_WrongArity(ctx);
return RedisModule_ReplyWithString(ctx, argv[1]);
}
RedisModuleString *getStringConfigCommand(const char *name, void *privdata) {
REDISMODULE_NOT_USED(name);
REDISMODULE_NOT_USED(privdata);
return tls_cfg;
}
int setStringConfigCommand(const char *name, RedisModuleString *new, void *privdata, RedisModuleString **err) {
REDISMODULE_NOT_USED(name);
REDISMODULE_NOT_USED(err);
REDISMODULE_NOT_USED(privdata);
if (tls_cfg) RedisModule_FreeString(NULL, tls_cfg);
RedisModule_RetainString(NULL, new);
tls_cfg = new;
return REDISMODULE_OK;
}
int RedisModule_OnLoad(void *ctx, RedisModuleString **argv, int argc)
{
....
if (RedisModule_CreateCommand(ctx,"tls",tlsCommand,"",0,0,0) == REDISMODULE_ERR)
return REDISMODULE_ERR;
if (RedisModule_RegisterStringConfig(ctx, "cfg", "", REDISMODULE_CONFIG_DEFAULT, getStringConfigCommand, setStringConfigCommand, NULL, NULL) == REDISMODULE_ERR)
return REDISMODULE_ERR;
if (RedisModule_LoadConfigs(ctx) == REDISMODULE_ERR) {
if (tls_cfg) {
RedisModule_FreeString(ctx, tls_cfg);
tls_cfg = NULL;
}
return REDISMODULE_ERR;
}
...
}
Co-authored-by: zhenwei pi <pizhenwei@bytedance.com>
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
This PR includes 2 missed test cases of XDEL and XGROUP CREATE command
1. one test case: XDEL delete multiply id once
2. 3 test cases: XGROUP CREATE has ENTRIESREAD parameter,
which equal 0 (special positive number), 3 and negative value.
Co-authored-by: Ubuntu <lucas.guang.yang1@huawei.com>
Co-authored-by: Oran Agra <oran@redislabs.com>
Co-authored-by: Binbin <binloveplay1314@qq.com>
Currently, we call zfree(cmd->args), but the argument array
needs to be freed recursively (there might be sub-args).
Also fixed memory leaks on cmd->tips and cmd->history.
Fixes#11145
Fix replication inconsistency on modules that uses key space notifications.
### The Problem
In general, key space notifications are invoked after the command logic was
executed (this is not always the case, we will discuss later about specific
command that do not follow this rules). For example, the `set x 1` will trigger
a `set` notification that will be invoked after the `set` logic was performed, so
if the notification logic will try to fetch `x`, it will see the new data that was written.
Consider the scenario on which the notification logic performs some write
commands. for example, the notification logic increase some counter,
`incr x{counter}`, indicating how many times `x` was changed.
The logical order by which the logic was executed is has follow:
```
set x 1
incr x{counter}
```
The issue is that the `set x 1` command is added to the replication buffer
at the end of the command invocation (specifically after the key space
notification logic was invoked and performed the `incr` command).
The replication/aof sees the commands in the wrong order:
```
incr x{counter}
set x 1
```
In this specific example the order is less important.
But if, for example, the notification would have deleted `x` then we would
end up with primary-replica inconsistency.
### The Solution
Put the command that cause the notification in its rightful place. In the
above example, the `set x 1` command logic was executed before the
notification logic, so it should be added to the replication buffer before
the commands that is invoked by the notification logic. To achieve this,
without a major code refactoring, we save a placeholder in the replication
buffer, when finishing invoking the command logic we check if the command
need to be replicated, and if it does, we use the placeholder to add it to the
replication buffer instead of appending it to the end.
To be efficient and not allocating memory on each command to save the
placeholder, the replication buffer array was modified to reuse memory
(instead of allocating it each time we want to replicate commands).
Also, to avoid saving a placeholder when not needed, we do it only for
WRITE or MAY_REPLICATE commands.
#### Additional Fixes
* Expire and Eviction notifications:
* Expire/Eviction logical order was to first perform the Expire/Eviction
and then the notification logic. The replication buffer got this in the
other way around (first notification effect and then the `del` command).
The PR fixes this issue.
* The notification effect and the `del` command was not wrap with
`multi-exec` (if needed). The PR also fix this issue.
* SPOP command:
* On spop, the `spop` notification was fired before the command logic
was executed. The change in this PR would have cause the replication
order to be change (first `spop` command and then notification `logic`)
although the logical order is first the notification logic and then the
`spop` logic. The right fix would have been to move the notification to
be fired after the command was executed (like all the other commands),
but this can be considered a breaking change. To overcome this, the PR
keeps the current behavior and changes the `spop` code to keep the right
logical order when pushing commands to the replication buffer. Another PR
will follow to fix the SPOP properly and match it to the other command (we
split it to 2 separate PR's so it will be easy to cherry-pick this PR to 7.0 if
we chose to).
#### Unhanded Known Limitations
* key miss event:
* On key miss event, if a module performed some write command on the
event (using `RM_Call`), the `dirty` counter would increase and the read
command that cause the key miss event would be replicated to the replication
and aof. This problem can also happened on a write command that open
some keys but eventually decides not to perform any action. We decided
not to handle this problem on this PR because the solution is complex
and will cause additional risks in case we will want to cherry-pick this PR.
We should decide if we want to handle it in future PR's. For now, modules
writers is advice not to perform any write commands on key miss event.
#### Testing
* We already have tests to cover cases where a notification is invoking write
commands that are also added to the replication buffer, the tests was modified
to verify that the replica gets the command in the correct logical order.
* Test was added to verify that `spop` behavior was kept unchanged.
* Test was added to verify key miss event behave as expected.
* Test was added to verify the changes do not break lazy expiration.
#### Additional Changes
* `propagateNow` function can accept a special dbid, -1, indicating not
to replicate `select`. We use this to replicate `multi/exec` on `propagatePendingCommands`
function. The side effect of this change is that now the `select` command
will appear inside the `multi/exec` block on the replication stream (instead of
outside of the `multi/exec` block). Tests was modified to match this new behavior.
Make sure the script calls in the tests declare the keys they intend to use.
Do that with minimal changes to existing lines (so many scripts still have a hard coded key names)
Co-authored-by: Valentino Geron <valentino@redis.com>
This pr mainly has the following four changes:
1. Add missing lua_pop in `luaGetFromRegistry`.
This bug affects `redis.register_function`, where `luaGetFromRegistry` in
`luaRegisterFunction` will return null when we call `redis.register_function` nested.
.e.g
```
FUNCTION LOAD "#!lua name=mylib \n local lib=redis \n lib.register_function('f2', function(keys, args) lib.register_function('f1', function () end) end)"
fcall f2 0
````
But since we exit when luaGetFromRegistry returns null, it does not cause the stack to grow indefinitely.
3. When getting `REGISTRY_RUN_CTX_NAME` from the registry, use `serverAssert`
instead of error return. Since none of these lua functions are registered at the time
of function load, scriptRunCtx will never be NULL.
4. Add `serverAssert` for `luaLdbLineHook`, `luaEngineLoadHook`.
5. Remove `luaGetFromRegistry` from `redis_math_random` and
`redis_math_randomseed`, it looks like they are redundant.
some skip tags were missing on some tests
avoid using HELLO if denytags has resp3 (target server may not support it)
Co-authored-by: Valentino Geron <valentino@redis.com>
`bitfield` with `get` may not be readonly.
```
127.0.0.1:6384> acl setuser hello on nopass %R~* +@all
OK
127.0.0.1:6384> auth hello 1
OK
127.0.0.1:6384> bitfield hello set i8 0 1
(error) NOPERM this user has no permissions to access one of the keys used as arguments
127.0.0.1:6384> bitfield hello set i8 0 1 get i8 0
1) (integer) 0
2) (integer) 1
```
Co-authored-by: Oran Agra <oran@redislabs.com>
* some of the tests don't clean the key the use
* marked tests with `{singledb:skip}` if they use SELECT
Co-authored-by: Valentino Geron <valentino@redis.com>
Fix#11030, use lua_rawget to avoid triggering metatables.
#11030 shows how return `_G` from the Lua script (either function or eval), cause the
Lua interpreter to Panic and the Redis processes to exit with error code 1.
Though return `_G` only panic on Redis 7 and 6.2.7, the underline issue exists on older
versions as well (6.0 and 6.2). The underline issue is returning a table with a metatable
such that the metatable raises an error.
The following example demonstrate the issue:
```
127.0.0.1:6379> eval "local a = {}; setmetatable(a,{__index=function() foo() end}) return a" 0
Error: Server closed the connection
```
```
PANIC: unprotected error in call to Lua API (user_script:1: Script attempted to access nonexistent global variable 'foo')
```
The Lua panic happened because when returning the result to the client, Redis needs to
introspect the returning table and transform the table into a resp. In order to scan the table,
Redis uses `lua_gettable` api which might trigger the metatable (if exists) and might raise an error.
This code is not running inside `pcall` (Lua protected call), so raising an error causes the
Lua to panic and exit. Notice that this is not a crash, its a Lua panic that exit with error code 1.
Returning `_G` panics on Redis 7 and 6.2.7 because on those versions `_G` has a metatable
that raises error when trying to fetch a none existing key.
### Solution
Instead of using `lua_gettable` that might raise error and cause the issue, use `lua_rawget`
that simply return the value from the table without triggering any metatable logic.
This is promised not to raise and error.
The downside of this solution is that it might be considered as breaking change, if someone
rely on metatable in the returned value. An alternative solution is to wrap this entire logic
with `pcall` (Lua protected call), this alternative require a much bigger refactoring.
### Back Porting
The same fix will work on older versions as well (6.2, 6.0). Notice that on those version,
the issue can cause Redis to crash if inside the metatable logic there is an attempt to accesses
Redis (`redis.call`). On 7.0, there is not crash and the `redis.call` is executed as if it was done
from inside the script itself.
### Tests
Tests was added the verify the fix
Gossip the cluster node blacklist in ping and pong messages.
This means that CLUSTER FORGET doesn't need to be sent to all nodes in a cluster.
It can be sent to one or more nodes and then be propagated to the rest of them.
For each blacklisted node, its node id and its remaining blacklist TTL is gossiped in a
cluster bus ping extension (introduced in #9530).
A timing issue like this was reported in freebsd daily CI:
```
*** [err]: Sanity test push cmd after resharding in tests/unit/cluster/cli.tcl
Expected 'CLUSTERDOWN The cluster is down' to match '*MOVED*'
```
We additionally wait for each node to reach a consensus on the cluster
state in wait_for_condition to avoid the cluster down error.
The fix just like #10495, quoting madolson's comment:
Cluster check just verifies the the config state is self-consistent,
waiting for cluster_state to be okay is an independent check that all
the nodes actually believe each other are healthy.
At the same time i noticed that unit/moduleapi/cluster.tcl has an exact
same test, may have the same problem, also modified it.
The temporary array for deleted entries reply of XAUTOCLAIM was
insufficient, but also in fact the COUNT argument should be used to
control the size of the reply, so instead of terminating the loop by
only counting the claimed entries, we'll count deleted entries as well.
Fix#10968
Addresses CVE-2022-31144
In the newly added cluster hostnames test, the primary is failing over during the reboot
for valgrind so we are validating the wrong node. This change just sets the replica to
prevent taking over, which seems to fix the test.
We could have also set the timeout higher, but it slows down the test.
In #9389, we add a new `cluster-port` config and make cluster bus port configurable,
and currently redis-cli --cluster create/add-node doesn't support with a configurable `cluster-port` instance.
Because redis-cli uses the old way (port + 10000) to send the `CLUSTER MEET` command.
Now we add this support on redis-cli `--cluster`, note we don't need to explicitly pass in the
`cluster-port` parameter, we can get the real `cluster-port` of the node in `clusterManagerNodeLoadInfo`,
so the `--cluster create` and `--cluster add-node` interfaces have not changed.
We will use the `cluster-port` when we are doing `CLUSTER MEET`, also note that `CLUSTER MEET` bus-port
parameter was added in 4.0, so if the bus_port (the one in redis-cli) is 0, or equal (port + 10000),
we just call `CLUSTER MEET` with 2 arguments, using the old form.
Co-authored-by: Madelyn Olson <34459052+madolson@users.noreply.github.com>
Account sharded pubsub channels memory consumption in client memory usage
computation to accurately evict client based on the set threshold for `maxmemory-clients`.
When calling CLIENT INFO/LIST, and in various debug prints, Redis is printing
the number of pubsub channels / patterns the client is subscribed to.
With the addition of sharded pubsub, it would be useful to print the number of
keychannels the client is subscribed to as well.
Since the ranges of `unsigned long long` and `long long` are different, we cannot read an
`unsigned long long` integer from a `RedisModuleString` by `RedisModule_StringToLongLong` .
So I added two new Redis Module APIs to support the conversion between these two types:
* `RedisModule_StringToULongLong`
* `RedisModule_CreateStringFromULongLong`
Signed-off-by: RinChanNOWWW <hzy427@gmail.com>
This commit has two topics.
## Passing config name and value in the same arg
In #10660 (Redis 7.0.1), when we supported the config values that can start with `--` prefix (one of the two topics of that PR),
we broke another pattern: `redis-server redis.config "name value"`, passing both config name
and it's value in the same arg, see #10865
This wasn't a intended change (i.e we didn't realize this pattern used to work).
Although this is a wrong usage, we still like to fix it.
Now we support something like:
```
src/redis-server redis.conf "--maxmemory '700mb'" "--maxmemory-policy volatile-lru" --proc-title-template --my--title--template --loglevel verbose
```
## Changes around --save
Also in this PR, we undo the breaking change we made in #10660 on purpose.
1. `redis-server redis.conf --save --loglevel verbose` (missing `save` argument before anotehr argument).
In 7.0.1, it was throwing an wrong arg error.
Now it will work and reset the save, similar to how it used to be in 7.0.0 and 6.2.x.
3. `redis-server redis.conf --loglevel verbose --save` (missing `save` argument as last argument).
In 6.2, it did not reset the save, which was a bug (inconsistent with the previous bullet).
Now we will make it work and reset the save as well (a bug fix).
The PR fixes 2 issues:
### RM_Call crash on script mode
`RM_Call` can potentially be called from a background thread where `server.current_client`
are not set. In such case we get a crash on `NULL` dereference.
The fix is to check first if `server.current_client` is `NULL`, if it does we should
verify disc errors and readonly replica as we do to any normal clients (no masters nor AOF).
### RM_Call block OOM commands when not needed
Again `RM_Call` can be executed on a background thread using a `ThreadSafeCtx`.
In such case `server.pre_command_oom_state` can be irrelevant and should not be
considered when check OOM state. This cause OOM commands to be blocked when
not necessarily needed.
In such case, check the actual used memory (and not the cached value). Notice that in
order to know if the cached value can be used, we check that the ctx that was used on
the `RM_Call` is a ThreadSafeCtx. Module writer can potentially abuse the API and use
ThreadSafeCtx on the main thread. We consider this as a API miss used.
when we know the size of the zset we're gonna store in advance,
we can check if it's greater than the listpack encoding threshold,
in which case we can create a skiplist from the get go, and avoid
converting the listpack to skiplist later after it was already populated.
If a script made a modification and then was interrupted for taking too long.
there's a chance redis will detect that a replica dropped and would like to reject
write commands with NOREPLICAS due to insufficient good replicas.
returning an error on a command in this case breaks the script atomicity.
The same could in theory happen with READONLY, MISCONF, but i don't think
these state changes can happen during script execution.
I noticed that scripting.tcl uses INFO from within a script and thought it's an
overkill and concluded it's nicer to use another CMD_STALE command,
decided to use ECHO, and then noticed it's not at all allowed in stale mode.
probably overlooked at #6843
The SET and BITFIELD command were added `get_keys_function` in #10148, causing
them to be wrongly marked movablekeys in `populateCommandMovableKeys`.
This was an unintended side effect introduced in #10148 (7.0 RC1)
which could cause some clients an extra round trip for these commands in cluster mode.
Since we define movablekeys as a way to determine if the legacy range [first, last, step]
doesn't find all keys, then we need a completely different approach.
The right approach should be to check if the legacy range covers all key-specs,
and if none of the key-specs have the INCOMPLETE flag.
This way, we don't need to look at getkeys_proc of VARIABLE_FLAG at all.
Probably with the exception of modules, who may still not be using key-specs.
In this PR, we removed `populateCommandMovableKeys` and put its logic in
`populateCommandLegacyRangeSpec`.
In order to properly serve both old and new modules, we must probably keep relying
CMD_MODULE_GETKEYS, but do that only for modules that don't declare key-specs.
For ones that do, we need to take the same approach we take with native redis commands.
This approach was proposed by Oran. Fixes#10833
Co-authored-by: Oran Agra <oran@redislabs.com>
Redis 7 adds some new alias config like `hash-max-listpack-entries` alias `hash-max-ziplist-entries`.
If a config file contains both real name and alias like this:
```
hash-max-listpack-entries 20
hash-max-ziplist-entries 20
```
after set `hash-max-listpack-entries` to 100 and `config rewrite`, the config file becomes to:
```
hash-max-listpack-entries 100
hash-max-ziplist-entries 20
```
we can see that the alias config is not modified, and users will get wrong config after restart.
6.0 and 6.2 doesn't have this bug, since they only have the `slave` word alias.
Co-authored-by: Oran Agra <oran@redislabs.com>
A regression from #10285 (redis 7.0).
CONFIG REWRITE would put lines with: `include`, `rename-command`,
`user`, `loadmodule`, and any module specific config in a comment.
For ACL `user`, `loadmodule` and module specific configs would be
re-inserted at the end (instead of updating existing lines), so the only
implication is a messy config file full of comments.
But for `rename-command` and `include`, the implication would be that
they're now missing, so a server restart would lose them.
Co-authored-by: Oran Agra <oran@redislabs.com>
The important part is that read-only scripts (not just EVAL_RO
and FCALL_RO, but also ones with `no-writes` executed by normal EVAL or
FCALL), will now be permitted to run during CLIENT PAUSE WRITE (unlike
before where only the _RO commands would be processed).
Other than that, some errors like OOM, READONLY, MASTERDOWN are now
handled by processCommand, rather than the command itself affects the
error string (and even error code in some cases), and command stats.
Besides that, now the `may-replicate` commands, PFCOUNT and PUBLISH, will
be considered `write` commands in scripts and will be blocked in all
read-only scripts just like other write commands.
They'll also be blocked in EVAL_RO (i.e. even for scripts without the
`no-writes` shebang flag.
This commit also hides the `may_replicate` flag from the COMMAND command
output. this is a **breaking change**.
background about may_replicate:
We don't want to expose a no-may-replicate flag or alike to scripts, since we
consider the may-replicate thing an internal concern of redis, that we may
some day get rid of.
In fact, the may-replicate flag was initially introduced to flag EVAL: since
we didn't know what it's gonna do ahead of execution, before function-flags
existed). PUBLISH and PFCOUNT, both of which because they have side effects
which may some day be fixed differently.
code changes:
The changes in eval.c are mostly code re-ordering:
- evalCalcFunctionName is extracted out of evalGenericCommand
- evalExtractShebangFlags is extracted luaCreateFunction
- evalGetCommandFlags is new code
* Fix broken protocol when redis can't persist to RDB (general commands, not
modules), excessive newline. regression of #10372 (7.0 RC3)
* Fix broken protocol when Redis can't persist to AOF (modules and
scripts), missing newline.
* Fix bug in OOM check of EVAL scripts called from RM_Call.
set the cached OOM state for scripts before executing module commands too,
so that it can serve scripts that are executed by modules.
i.e. in the past EVAL executed by RM_Call could have either falsely
fail or falsely succeeded because of a wrong cached OOM state flag.
* Fix bugs with RM_Yield:
1. SHUTDOWN should only accept the NOSAVE mode
2. Avoid eviction during yield command processing.
3. Avoid processing master client commands while yielding from another client
* Add new two more checks to RM_Call script mode.
1. READONLY You can't write against a read only replica
2. MASTERDOWN Link with MASTER is down and `replica-serve-stale-data` is set to `no`
* Add new RM_Call flag to let redis automatically refuse `deny-oom` commands
while over the memory limit.
* Add tests to cover various errors from Scripts, Modules, Modules
calling scripts, and Modules calling commands in script mode.
Add tests:
* Looks like the MISCONF error was completely uncovered by the tests,
add tests for it, including from scripts, and modules
* Add tests for NOREPLICAS from scripts
* Add tests for the various errors in module RM_Call, including RM_Call that
calls EVAL, and RM_call in "eval mode". that includes:
NOREPLICAS, READONLY, MASTERDOWN, MISCONF
To easily distinguish between sharded channel message and a global
channel message, introducing `smessage` (instead of `message`) as
message bulk for sharded channel publish message.
This is gonna be a breaking change in 7.0.1!
Background:
Sharded pubsub introduced in redis 7.0, but after the release we quickly
realized that the fact that it's problematic that the client can't distinguish
between normal (global) pubsub messages and sharded ones.
This is important because the same connection can subscribe to both,
but messages sent to one pubsub system are not propagated to the
other (they're completely separate), so if one connection is used to
subscribe to both, we need to assist the client library to know which
message it got so it can forward it to the correct callback.
When `zrangestore` is called container destination object is created.
Before this PR we used to create a listpack based object even if `zset-max-ziplist-entries`
or equivalent`zset-max-listpack-entries` was set to 0.
This triggered immediate conversion of the listpack into a skiplist in `zrangestore`, which hits
an assertion resulting in an engine crash.
Added a TCL test that reproduces this issue.
This bug was introduced in #9484 (7.0.0).
It result that BZMPOP blocked on non-key arguments.
Like `bzmpop 0 1 myzset min count 10`, this command will additionally
block in these keys (except for the first and the last argument) and can return their values:
- 0: timeout value
- 1: numkeys value
- min: min/max token
- count: count token
Scripts that have the `no-writes` flag, cannot execute write commands,
and since all `deny-oom` commands are write commands, we now act
as if the `allow-oom` flag is implicitly set for scripts that set the `no-writes` flag.
this also implicitly means that the EVAL*_RO and FCALL_RO commands can
never fails with OOM error.
Note about a bug that's no longer relevant:
There was an issue with EVAL*_RO using shebang not being blocked correctly
in OOM state:
When an EVAL script declares a shebang, it was by default not allowed to run in
OOM state.
but this depends on a flag that is updated before the command is executed, which
was not updated in case of the `_RO` variants.
the result is that if the previous cached state was outdated (either true or false),
the script will either unjustly fail with OOM, or unjustly allowed to run despite
the OOM state.
It doesn't affect scripts without a shebang since these depend on the actual
commands they run, and since these are only read commands, they don't care
for that cached oom state flag.
it did affect scripts with shebang and no allow-oom flag, bug after the change in
this PR, scripts that are run with eval_ro would implicitly have that flag so again
the cached state doesn't matter.
p.s. this isn't a breaking change since all it does is allow scripts to run when they
should / could rather than blocking them.
Updated the comments for:
info command
lmpopCommand and blmpopCommand
sinterGenericCommand
Fix the missing "key" words in the srandmemberCommand function
For LPOS command, when rank is 0, prompt user that rank could be
positive number or negative number, and add a test for it
The purpose of the test is to kill the child while it is running.
From the last two lines we can see the child exits before being killed.
```
- Module fork started pid: 56998
* <fork> fork child started
- Killing running module fork child: 56998
* <fork> fork child exiting
signal-handler (1652267501) Received SIGUSR1 in child, exiting now.
```
In this commit, we pass an argument to `fork.create` indicating how
long it should sleep. For the fork kill test, we use a longer time to
avoid the child exiting before being killed.
Other changes:
use wait_for_condition instead of hardcoded `after 250`.
Unify the test for failing fork with the one for killing it (save time)
## Take one bulk string with spaces for MULTI_ARG configs parsing
Currently redis-server looks for arguments that start with `--`,
and anything in between them is considered arguments for the config.
like: `src/redis-server --shutdown-on-sigint nosave force now --port 6380`
MULTI_ARG configs behave differently for CONFIG command, vs the command
line argument for redis-server.
i.e. CONFIG command takes one bulk string with spaces in it, while the
command line takes an argv array with multiple values.
In this PR, in config.c, if `argc > 1` we can take them as is,
and if the config is a `MULTI_ARG` and `argc == 1`, we will split it by spaces.
So both of these will be the same:
```
redis-server --shutdown-on-sigint nosave force now --shutdown-on-sigterm nosave force
redis-server --shutdown-on-sigint nosave "force now" --shutdown-on-sigterm nosave force
redis-server --shutdown-on-sigint nosave "force now" --shutdown-on-sigterm "nosave force"
```
## Allow options value to use the `--` prefix
Currently it decides to switch to the next config, as soon as it sees `--`,
even if there was not a single value provided yet to the last config,
this makes it impossible to define a config value that has `--` prefix in it.
For instance, if we want to set the logfile to `--my--log--file`,
like `redis-server --logfile --my--log--file --loglevel verbose`,
current code will handle that incorrectly.
In this PR, now we allow a config value that has `--` prefix in it.
**But note that** something like `redis-server --some-config --config-value1 --config-value2 --loglevel debug`
would not work, because if you want to pass a value to a config starting with `--`, it can only be a single value.
like: `redis-server --some-config "--config-value1 --config-value2" --loglevel debug`
An example (using `--` prefix config value):
```
redis-server --logfile --my--log--file --loglevel verbose
redis-cli config get logfile loglevel
1) "loglevel"
2) "verbose"
3) "logfile"
4) "--my--log--file"
```
### Potentially breaking change
`redis-server --save --loglevel verbose` used to work the same as `redis-server --save "" --loglevel verbose`
now, it'll error!
## FLUSHALL
We used to restore the dirty counter after `rdbSave` zeroed it if we enable save.
Otherwise FLUSHALL will not be replicated nor put into the AOF.
And then we do increment it again below.
Without that extra dirty++, when db was already empty, FLUSHALL
will not be replicated nor put into the AOF.
We now gonna replace all that dirty counter magic with a call
to forceCommandPropagation (REPL and AOF), instead of all the
messing around with the dirty counter.
Added tests to cover three part (dirty counter, REPL, AOF).
One benefit other than cleaner code is that the `rdb_changes_since_last_save` is correct in this case.
## FLUSHDB
FLUSHDB was not replicated nor put into the AOF when db was already empty.
Unlike DEL on a non-existing key, FLUSHDB always does something, and that's to call the module hook.
So basically FLUSHDB is never a NOP, and thus it should always be propagated.
Not doing that, could mean that if a module does something in that hook, and wants to
avoid issues of that hook being missing on the replica if the db is empty, it'll need to do complicated things.
So now FLUSHDB add call forceCommandPropagation, we will always propagate FLUSHDB.
Always propagating FLUSHDB seems like a safe approach that shouldn't have any drawbacks (other than looking odd)
This was mentioned in #8972
## Test section:
We actually found it while solving a race condition in the BGSAVE test (other.tcl).
It was found in extra_ci Daily Arm64 (test-libc-malloc).
```
[exception]: Executing test client: ERR Background save already in progress.
ERR Background save already in progress
```
It look like `r flushdb` trigger (schedule) a bgsave right after `waitForBgsave r` and before `r save`.
Changing flushdb to flushall, FLUSHALL will do a foreground save and then set the dirty counter to 0.
Set `old_li` to NULL to avoid linking it again on error.
Before the fix, loading an already existing library will cause the existing library to be added again. This cause not harm other then wrong statistics. The statistics that are effected by the issue are:
* `libraries_count` and `functions_count` returned by `function stats` command
* `used_memory_functions` returned on `info memory` command
* `functions.caches` returned on `memory stats` command
Unintentional change in #9644 (since RC1) meant that an empty `--save ""` config
from command line, wouldn't have clear any setting from the config file
Added tests to cover that, and improved test infra to take additional
command line args for redis-server
If we want to support bits that can be overlapping, we need to make sure
that:
1. we don't use the same bit for two return values.
2. values should be sorted so that prefer ones (matching more
bits) come first.
When user uses the same input key for SDIFF as the first one, the result must be empty, so we don't need to process the elements to test.
This method is like the one done in zset‘s `zsetChooseDiffAlgorithm`
Co-authored-by: Oran Agra <oran@redislabs.com>
The white list is done by setting a metatable on the global table before initializing
any library. The metatable set the `__newindex` field to a function that check
the white list before adding the field to the table. Fields which is not on the
white list are simply ignored.
After initialization phase is done we protect the global table and each table
that might be reachable from the global table. For each table we also protect
the table metatable if exists.
Use the new `lua_enablereadonlytable` Lua API to protect the global tables of
both evals scripts and functions. For eval scripts, the implemetation is easy,
We simply call `lua_enablereadonlytable` on the global table to turn it into
a readonly table.
On functions its more complecated, we want to be able to switch globals between
load run and function run. To achieve this, we create a new empty table that
acts as the globals table for function, we control the actual globals using metatable
manipulation. Notice that even if the user gets a pointer to the original tables, all
the tables are set to be readonly (using `lua_enablereadonlytable` Lua API) so he can
not change them. The following inlustration better explain the solution:
```
Global table {} <- global table metatable {.__index = __real_globals__}
```
The `__real_globals__` is set depends on the run context (function load or function call).
Why this solution is needed and its not enough to simply switch globals?
When we run in the context of function load and create our functions, our function gets
the current globals that was set when they were created. Replacing the globals after
the creation will not effect them. This is why this trick it mandatory.
Enables registration of an enum config that'll let the user pass multiple keywords that
will be combined with `|` as flags into the integer config value.
```
const char *enum_vals[] = {"none", "one", "two", "three"};
const int int_vals[] = {0, 1, 2, 4};
if (RedisModule_RegisterEnumConfig(ctx, "flags", 3, REDISMODULE_CONFIG_DEFAULT | REDISMODULE_CONFIG_BITFLAGS, enum_vals, int_vals, 4, getFlagsConfigCommand, setFlagsConfigCommand, NULL, NULL) == REDISMODULE_ERR) {
return REDISMODULE_ERR;
}
```
doing:
`config set moduleconfigs.flags "two three"` will result in 6 being passed to`setFlagsConfigCommand`.
The SHUTDOWN command has various flags to change it's default behavior,
but in some cases establishing a connection to redis is complicated and it's easier
for the management software to use signals. however, so far the signals could only
trigger the default shutdown behavior.
Here we introduce the option to control shutdown arguments for SIGTERM and SIGINT.
New config options:
`shutdown-on-sigint [nosave | save] [now] [force]`
`shutdown-on-sigterm [nosave | save] [now] [force]`
Implementation:
Support MULTI_ARG_CONFIG on createEnumConfig to support multiple enums to be applied as bit flags.
Co-authored-by: Oran Agra <oran@redislabs.com>
Adds the `allow-cross-slot-keys` flag to Eval scripts and Functions to allow
scripts to access keys from multiple slots.
The default behavior is now that they are not allowed to do that (unlike before).
This is a breaking change for 7.0 release candidates (to be part of 7.0.0), but
not for previous redis releases since EVAL without shebang isn't doing this check.
Note that the check is done on both the keys declared by the EVAL / FCALL command
arguments, and also the ones used by the script when making a `redis.call`.
A note about the implementation, there seems to have been some confusion
about allowing access to non local keys. I thought I missed something in our
wider conversation, but Redis scripts do block access to non-local keys.
So the issue was just about cross slots being accessed.
1. Disk error and slave count checks didn't flag the transactions or counted correctly in command stats (regression from #10372 , 7.0 RC3)
2. RM_Call will reply the same way Redis does, in case of non-exisitng command or arity error
3. RM_WrongArtiy will consider the full command name
4. Use lowercase 'u' in "unknonw subcommand" (to align with "unknown command")
Followup work of #10127
This case is interesting because it originates from cron,
rather than from another command.
The idea came from looking at #9890 and #10573, and I was wondering if RM_Call
would work properly when `server.current_client == NULL`
* Fix timing issue in slowlog redact test
This test failed once in my daily CI (test-sanitizer-address (clang))
```
*** [err]: SLOWLOG - Some commands can redact sensitive fields in tests/unit/slowlog.tcl
Expected 'migrate 127.0.0.1 25649 key 9 5000 AUTH2 (redacted) (redacted)' to match '* key 9 5000 AUTH (redacted)' (context: type eval line 12 cmd {assert_match {* key 9 5000 AUTH (redacted)} [lindex [lindex [r slowlog get] 1] 3]} proc ::test)
```
The reason is that with slowlog-log-slower-than 10000,
slowlog get will have a chance to exceed 10ms.
Change slowlog-log-slower-than from 10000 to -1, disable it.
Also handles a same potentially problematic test above.
This is actually the same timing issue as #10432.
But also avoid repeated calls to `SLOWLOG GET`
Add a configuration option to attach an operating system-specific identifier to Redis sockets, supporting advanced network configurations using iptables (Linux) or ipfw (FreeBSD).
RM_Yield was missing a call to protectClient to prevent redis from
processing future commands of the yielding client.
Adding tests that fail without this fix.
This would be complicated to solve since nested calls to RM_Call used to
replace the current_client variable with the module temp client.
It looks like it's no longer necessary to do that, since it was added
back in #9890 to solve two issues, both already gone:
1. call to CONFIG SET maxmemory could trigger a module hook calling
RM_Call. although this specific issue is gone, arguably other hooks
like keyspace notification, can do the same.
2. an assertion in lookupKey that checks the current command of the
current client, introduced in #9572 and removed in #10248
since PUBLISH and SPUBLISH use different dictionaries for channels and clients,
and we already have an API for PUBLISH, it only makes sense to have one for SPUBLISH
Add test coverage and unifying some test infrastructure.
The tests verify that loading a binary payload to the Lua interpreter raises an error.
The Lua code modification was done here: fdf9d45509
which force the Lau interpreter to always use the text parser.
Add APIs to allow modules to compute the memory consumption of opaque objects owned by redis.
Without these, the mem_usage callbacks of module data types are useless in many cases.
Other changes:
Fix streamRadixTreeMemoryUsage to include the size of the rax structure itself
By the convention of errors, there is supposed to be a space between the code and the name.
While looking at some lua stuff I noticed that interpreter errors were not adding the space,
so some clients will try to map the detailed error message into the error.
We have tests that hit this condition, but they were just checking that the string "starts" with ERR.
I updated some other tests with similar incorrect string checking. This isn't complete though, as
there are other ways we check for ERR I didn't fix.
Produces some fun output like:
```
# Errorstats
errorstat_ERR:count=1
errorstat_ERRuser_script_1_:count=1
```
Add an optional keyspace event when new keys are added to the db.
This is useful for applications where clients need to be aware of the redis keyspace.
Such an application can SCAN once at startup and then listen for "new" events (plus
others associated with DEL, RENAME, etc).
Allow specifying an ACL log reason, which is shown in the log. Right now it always shows "unknown", which is a little bit cryptic. This is a breaking change, but this API was added as part of 7 so it seems ok to stabilize it still.
Add field to COMMAND DOCS response to denote the name of the module
that added that command.
COMMAND LIST can filter by module, but if you get the full commands list,
you may still wanna know which command belongs to which module.
The alternative would be to do MODULE LIST, and then multiple calls to COMMAND LIST
The bug was when using REDISMODULE_YIELD_FLAG_CLIENTS.
in that case we would have only set the CLIENTS type flag in
server.busy_module_yield_flags and then clear that flag when exiting
RM_Yield, so we would never call unblockPostponedClients when the
context is destroyed.
This didn't really have any actual implication, which is why the tests
couldn't (and still can't) find that since the bug only happens when
using CLIENT, but in this case we won't have any clients to un-postpone
i.e. clients will get rejected with BUSY error, rather than being
postponed.
Unrelated:
* Adding tests for nested contexts, just in case.
* Avoid nested RM_Yield calls
