* fail the test (exit code) in case of timeout.
* add --wait-server to allow attaching a debugger
* add --dont-clean to keep log files when tests are done
RESTORE now supports:
1. Setting LRU/LFU
2. Absolute-time TTL
Other related changes:
1. RDB loading will not override LRU bits when RDB file
does not contain the LRU opcode.
2. RDB loading will not set LRU/LFU bits if the server's
maxmemory-policy does not match.
Removing the fix about 50% of the times the test will not be able to
pass cleanly. It's very hard to write a test that will always fail, or
actually, it is possible but then it's likely that it will consistently
pass if we change some random bit, so better to use randomization here.
problems fixed:
* failing to read fragmentation information from jemalloc
* overflow in jemalloc fragmentation hint to the defragger
* test suite not triggering eviction after population
other fixes / improvements:
- LUA script memory isn't taken from zmalloc (taken from libc malloc)
so it can cause high fragmentation ratio to be displayed (which is false)
- there was a problem with "fragmentation" info being calculated from
RSS and used_memory sampled at different times (now sampling them together)
other details:
- adding a few more allocator info fields to INFO and MEMORY commands
- improve defrag test to measure defrag latency of big keys
- increasing the accuracy of the defrag test (by looking at real grag info)
this way we can use an even lower threshold and still avoid false positives
- keep the old (total) "fragmentation" field unchanged, but add new ones for spcific things
- add these the MEMORY DOCTOR command
- deduct LUA memory from the rss in case of non jemalloc allocator (one for which we don't "allocator active/used")
- reduce sampling rate of the rss and allocator info
After checking with the community via Twitter (here:
https://twitter.com/antirez/status/915130876861788161) the verdict was to
use ":". However I later realized, after users lamented the fact that
it's hard to copy IDs just with double click, that this was the reason
why I moved to "." in the first instance. Fortunately "-", that was the
other option with most votes, also gets selected with double click on
most terminal applications on Linux and MacOS.
So my reasoning was:
1) We can't retain "." because it's actually confusing to newcomers, it
looks like a floating number, people may be tricked into thinking they
can order IDs numerically as floats.
2) Moving to a double-click-to-select format is much better. People will
work with such IDs for long time when coding / debugging. Why making now
a choice that will impact this for the next years?
The only other viable option was "-", and that's what I did. Thanks.
getLongLongFromObject calls string2ll which has this line:
/* Return if not all bytes were used. */
so if you pass an sds with 3 characters "1\01" it will fail.
but getLongDoubleFromObject calls strtold, and considers it ok if eptr[0]==`\0`
i.e. if the end of the string found by strtold ends with null terminator
127.0.0.1:6379> set a 1
OK
127.0.0.1:6379> setrange a 2 2
(integer) 3
127.0.0.1:6379> get a
"1\x002"
127.0.0.1:6379> incrbyfloat a 2
"3"
127.0.0.1:6379> get a
"3"
This commit closes issue #3698, at least for now, since the root cause
was not fixed: the bounding box function, for huge radiuses, does not
return a correct bounding box, there are points still within the radius
that are left outside.
So when using GEORADIUS queries with radiuses in the order of 5000 km or
more, it was possible to see, at the edge of the area, certain points
not correctly reported.
Because the bounding box for now was used just as an optimization, and
such huge radiuses are not common, for now the optimization is just
switched off when the radius is near such magnitude.
Three test cases found by the Continuous Integration test were added, so
that we can easily trigger the bug again, both for regression testing
and in order to properly fix it as some point in the future.
Experimentally verified that it can trigger the issue reverting the fix.
At least on my system... Being the bug time/backlog dependant, it is
very hard to tell if this test will be able to trigger the problem
consistently, however even if it triggers the problem once in a while,
we'll see it in the CI environment at http://ci.redis.io.
Apparently 1.4 is too low compared to what you get in certain setups
(including mine). I raised it to 1.55 that hopefully is still enough to
test that the fragmentation went down from 1.7 but without incurring in
issues, however the test setup may be still fragile so certain times this
may lead to false positives again, it's hard to test for these things
in a determinsitic way.
Related to #3786.
And many other related Github issues... all reporting the same problem.
There was probably just not enough backlog in certain unlucky runs.
I'll ask people that can reporduce if they see now this as fixed as
well.
Testing with Solaris C compiler (SunOS 5.11 11.2 sun4v sparc sun4v)
there were issues compiling due to atomicvar.h and running the
tests also failed because of "tail" usage not conform with Solaris
tail implementation. This commit fixes both the issues.
Slow systems like the original Raspberry PI need more time
than 5 seconds to start the script and detect writes.
After fixing the Raspberry PI can pass the unit without issues.
The test now uses more diverse radius sizes, especially sizes near or
greater the whole earth surface are used, that are known to trigger edge
cases. Moreover the PRNG seeding was probably resulting into the same
sequence tested over and over again, now seeding unsing the current unix
time in milliseconds.
Related to #3631.
This actually includes two changes:
1) No newlines to take the master-slave link up when the upstream master
is down. Doing this is dangerous because the sub-slave often is received
replication protocol for an half-command, so can't receive newlines
without desyncing the replication link, even with the code in order to
cancel out the bytes that PSYNC2 was using. Moreover this is probably
also not needed/sane, because anyway the slave can keep serving
requests, and because if it's configured to don't serve stale data, it's
a good idea, actually, to break the link.
2) When a +CONTINUE with a different ID is received, we now break
connection with the sub-slaves: they need to be notified as well. This
was part of the original specification but for some reason it was not
implemented in the code, and was alter found as a PSYNC2 bug in the
integration testing.
This is the PSYNC2 test that helped find issues in the code, and that
still can show a protocol desync from time to time. Work is in progress
in order to find the issue. For now the test is not enabled in "make
test" and must be run manually.
By grepping the continuous integration errors log a number of GEORADIUS
tests failures were detected.
Fortunately when a GEORADIUS failure happens, the test suite logs enough
information in order to reproduce the problem: the PRNG seed,
coordinates and radius of the query.
By reproducing the issues, three different bugs were discovered and
fixed in this commit. This commit also improves the already good
reporting of the fuzzer and adds the failure vectors as regression
tests.
The issues found:
1. We need larger squares around the poles in order to cover the area
requested by the user. There were already checks in order to use a
smaller step (larger squares) but the limit set (+/- 67 degrees) is not
enough in certain edge cases, so 66 is used now.
2. Even near the equator, when the search area center is very near the
edge of the square, the north, south, west or ovest square may not be
able to fully cover the specified radius. Now a test is performed at the
edge of the initial guessed search area, and larger squares are used in
case the test fails.
3. Because of rounding errors between Redis and Tcl, sometimes the test
signaled false positives. This is now addressed.
Whenever possible the original code was improved a bit in other ways. A
debugging example stanza was added in order to make the next debugging
session simpler when the next bug is found.
During the initial handshake with the master a slave will report to have
a very high disconnection time from its master (since technically it was
disconnected since forever, so the current UNIX time in seconds is
reported).
However when the slave is connected again the Sentinel may re-scan the
INFO output again only after 10 seconds, which is a long time. During
this time Sentinels will consider this instance unable to failover, so
a useless delay is introduced.
Actaully this hardly happened in the practice because when a slave's
master is down, the INFO period for slaves changes to 1 second. However
when a manual failover is attempted immediately after adding slaves
(like in the case of the Sentinel unit test), this problem may happen.
This commit changes the INFO period to 1 second even in the case the
slave's master is not down, but the slave reported to be disconnected
from the master (by publishing, last time we checked, a master
disconnection time field in INFO).
This change is required as a result of an unrelated change in the
replication code that adds a small delay in the master-slave first
synchronization.
